100% Carbon Fiber Rings
#1
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Ajax, Ontario
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
100% carbon fiber ring is made from Aerospace grade carbon fiber and a special food/Skin safe resin.
A classic ring design made from beautiful 2x2 Twill Fabric.
This ring measures approximatly 3/8" wide with a comfortable subtle beveled edge and is finished off with a stunning highly polished surface.
The simplicity of this design really shows off that beautiful carbon fiber twill pattern we all love. If you have a different design in mind let me know and I can do that for you.
I personally don't like gold jewlery and wear my ring almost on a daily basis. I get tons of compliments on it. My girlfriend was offered $100 for hers one time also.
Shipped anywhere in North America.
$50 USD
Coloured rings are an extra $10ea. Red/Black Blue/Black available
Paypal, Check or money order.
Other CF rings go for upwards of $100USD !!!
Available in sizes 6, 7, 8, 9, 10, 11, 12
Custom ring sizes are available for a small upcharge.
Rings are made to order and shipped within 7 days.
If you need help determining your ring size, I can help. Send an email or PM for the ring sizing chart or visit your local jewler to assist you.
How to measure your ring size.
1- Print out the image below and follow these steps. Make sure the size is set correctly on your printer
2- Cut out the ring sizer. On the ring sizer, cut along the line marked *A* to make a small slot.
3- Insert end tab into the slot with the numbers facing outward to make a ring.
4- Place your finger inside the ring and pull snugly. Not too loose, not too tight.
5- Slide the ring sizer up your finger to be sure it fits over your knuckle.
The arrow will point to your ring size. If you are in between sizes, order the
next larger size.
A classic ring design made from beautiful 2x2 Twill Fabric.
This ring measures approximatly 3/8" wide with a comfortable subtle beveled edge and is finished off with a stunning highly polished surface.
The simplicity of this design really shows off that beautiful carbon fiber twill pattern we all love. If you have a different design in mind let me know and I can do that for you.
I personally don't like gold jewlery and wear my ring almost on a daily basis. I get tons of compliments on it. My girlfriend was offered $100 for hers one time also.
Shipped anywhere in North America.
$50 USD
Coloured rings are an extra $10ea. Red/Black Blue/Black available
Paypal, Check or money order.
Other CF rings go for upwards of $100USD !!!
Available in sizes 6, 7, 8, 9, 10, 11, 12
Custom ring sizes are available for a small upcharge.
Rings are made to order and shipped within 7 days.
If you need help determining your ring size, I can help. Send an email or PM for the ring sizing chart or visit your local jewler to assist you.
How to measure your ring size.
1- Print out the image below and follow these steps. Make sure the size is set correctly on your printer
2- Cut out the ring sizer. On the ring sizer, cut along the line marked *A* to make a small slot.
3- Insert end tab into the slot with the numbers facing outward to make a ring.
4- Place your finger inside the ring and pull snugly. Not too loose, not too tight.
5- Slide the ring sizer up your finger to be sure it fits over your knuckle.
The arrow will point to your ring size. If you are in between sizes, order the
next larger size.
#2
Senior Member
Join Date: Jul 2008
Location: seacoast (New Hampshire)
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 01/hyundai/tiburon
weird never seen anything like this, but cool none the less! im contemplating getting one
kinda expensive, and they do look kinda thin. i would rather have the outside rounded
good gift idea too!
kinda expensive, and they do look kinda thin. i would rather have the outside rounded
good gift idea too!
#3
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
*Preps for the following question to become a sig quote*
Can you make some CF Cock rings?
Can you make some CF Cock rings?
#4
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Ajax, Ontario
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
lol, I had thought to make a note about that in the post but decided against it.
Here ya go Redz
"I got used to glass itch on my arms but I couldn't imagine carbon itch on my dick"
Here ya go Redz
"I got used to glass itch on my arms but I couldn't imagine carbon itch on my dick"
#5
Moderator
Eew... Can't you make it a bit bigger then clear coat it really thick?
I mean, CF adornment on the little guy seems appropriate.
I mean, CF adornment on the little guy seems appropriate.
#8
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Ajax, Ontario
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Probably only going to be keeping this price till maybe the end of February. Will most likely go up to $65-70 Shipped at that time
maybe the pics don't do it justice but the edges are beveled slightly and they do have a nice thick clear coating on them
maybe the pics don't do it justice but the edges are beveled slightly and they do have a nice thick clear coating on them
#9
Moderator
^^You really could use some natural lighting and some better pix. I would probly buy one if I could see the depth of the ring. I can't really see any detail in the CF. Maybe you could get some clear pictures which are not blurry. I wonder what it would look like gripping a shifter or a steering wheel?
If I order one, can you make it real deep? I want one that will not poke my skin, and will look like some really really deep CF.
Maybe I'm not seeing the detail. It just looks like it's thin as heck, it would crunch into my finger and I can't see the depth.
If I order one, can you make it real deep? I want one that will not poke my skin, and will look like some really really deep CF.
Maybe I'm not seeing the detail. It just looks like it's thin as heck, it would crunch into my finger and I can't see the depth.
#10
Senior Member
Join Date: Oct 2007
Location: Princeton, MN
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
i'm thinking that's perfect for CF lovers, but i have an idea, maybe add metal edging on both sides of the ring? it'll add style and taste to the ring. just a penny for a thought, i'd probably get one if you can add that
and red Z, lmao.gif cock rings, like you need another toy lmao.gif
and red Z, lmao.gif cock rings, like you need another toy lmao.gif