The Tibby Its Done... 2 Years In The Making..
Thread Starter
Senior Member

Joined: Aug 2004
Posts: 2,764
Likes: 0
From: South Korea where u car from fool
Vehicle: 2008/Hyundai/Tiburon gt
Well i know you all have waited for awhile for this.. I next month will start the break down.. i will keep the same IHI Rx6 turbo.. We will mount it on top this time, custom exhaust mainfold the works.. while the engine is out i will do some long over due body work AKA Roll cage, and better frame work. A friend of mine that works for the oilbank race team over here GT1 class will help me with the frame work. while i am at it i will swap out my old ecu harness that we mod with the sem 2000 ecu to a true GK harness that should clean up the mess i got down there.. even though you cant see it i know its there ahhhhhh.. call me MAD
My plan is when we get to the Dyno to remap i want to see how far i can take it i am going to try for 750hp but we will have set to 1.5bar on the wastegate 2.0bar then 2.7bar " thats the plan" but i am not so sure i want to be zipping throught town at 550 with the boost off so i will keep people informed on what we do
here is shot of my clutch i know its over due as well



Here are the CP pistons 8.8:1 and 82.5mm "

Rods by CROWER..

ARP full kit... Thanks to jonGTR post
Head bolts

Crank bolts... forgot to put on the nuts and washers for the Pic owned.gif

Fuel will be handled by 2 walbro 255 intank pumps and RC 750cc injectors i have to order the injectors soon

The ride as you knew it


and the Ride now. due to my run in with a guard rail on the mountian pass and of course the insurance company would not pay to get it painted the same colour so i painted it marble grey hyundai paint code XA That day i really .. long story short oil on the road and lucky as hell!!! I took these last night after a 5 hour session of polishing and waxing.. I am so glad we have underground parking again...





a shot of the road out my window
My plan is when we get to the Dyno to remap i want to see how far i can take it i am going to try for 750hp but we will have set to 1.5bar on the wastegate 2.0bar then 2.7bar " thats the plan" but i am not so sure i want to be zipping throught town at 550 with the boost off so i will keep people informed on what we do
here is shot of my clutch i know its over due as well



Here are the CP pistons 8.8:1 and 82.5mm "

Rods by CROWER..

ARP full kit... Thanks to jonGTR post
Head bolts

Crank bolts... forgot to put on the nuts and washers for the Pic owned.gif

Fuel will be handled by 2 walbro 255 intank pumps and RC 750cc injectors i have to order the injectors soon

The ride as you knew it


and the Ride now. due to my run in with a guard rail on the mountian pass and of course the insurance company would not pay to get it painted the same colour so i painted it marble grey hyundai paint code XA That day i really .. long story short oil on the road and lucky as hell!!! I took these last night after a 5 hour session of polishing and waxing.. I am so glad we have underground parking again...





a shot of the road out my window
Moderator


Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
<div class='quotetop'>QUOTE (Mad_john @ Aug 21 2006, 12:26 PM) <{POST_SNAPBACK}></div><div class='quotemain'>ARP full kit... Thanks to jonGTR post
Head bolts</div>
And for the help, you can give me one of those clutches!!! sad.gif
Head bolts</div>
And for the help, you can give me one of those clutches!!! sad.gif
Senior Member

Joined: Aug 2009
Posts: 11,992
Likes: 0
From: Washington D.C.
Vehicle: Hyundai Tiburon FX
holy f***in' cow MJ!!! That sh*t looks SICK. 100,000 times better, especially those rims and the new paint hellz yeah. damnit that's the sickest tiburon ever dood. thank goodness you got new engine parts to be able to handle that kind of stress. you ARE the man. Your new home looks sexzzy.
don't run for COTM when i'm running for it smile.gif
don't run for COTM when i'm running for it smile.gif


