New Pic's Of My Tib
#1
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Elkhart, IN
Posts: 962
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2003 Tiburón GT
I just washed the Tib and took a few pics of it.
engine bay
System Cam Gear
JSpeed UD pulley
Vogtland springs and KYB Struts
now, some random shots.
just in case you want to see the other car behind it. tongue.gif
HID 6000k on both cars.
I have to change a couple of things on the car. Plus I know I need to re-spray the front bumper.
This is My To Do List.
1.new tires, I'm going get some Nitto Neo-Gen 205/40/17.
2. 2.5" exhaust with high flow cat, magnaflow resonator and the muffler I have on the car now.
3. H&R 15mm spacers on the back.
4.niteshade the fogs.
engine bay
System Cam Gear
JSpeed UD pulley
Vogtland springs and KYB Struts
now, some random shots.
just in case you want to see the other car behind it. tongue.gif
HID 6000k on both cars.
I have to change a couple of things on the car. Plus I know I need to re-spray the front bumper.
This is My To Do List.
1.new tires, I'm going get some Nitto Neo-Gen 205/40/17.
2. 2.5" exhaust with high flow cat, magnaflow resonator and the muffler I have on the car now.
3. H&R 15mm spacers on the back.
4.niteshade the fogs.
#2
Moderator
Join Date: Mar 2009
Location: wamego, kansas
Posts: 5,280
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 hyundai tiburon
I know you cut your plastic to show the cam gear, but most people cut it closer to the rounded edge so you can actually loosen the allent bolts to retard or advance the timing. other than that, looks like someone been busy. fing02.gif
#3
Senior Member
Join Date: Nov 2008
Location: Huntsville, AL
Posts: 2,881
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001/Hyundai/Tiburon
Looks great! I've got 2 cans of niteshades I'm not using, you're welcome to buy them from me if you want. I've been told it's best to have 2 cans, 1 barely does it... PM me if you're interested.
Love the HIDs, I have 6000k ones, they're definitely the best!
Love the HIDs, I have 6000k ones, they're definitely the best!
#4
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Elkhart, IN
Posts: 962
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2003 Tiburón GT
Thanks guys. Actually I'm going to cut the cam gear cover, but when i did it, it was pretty cold outside and I didn't have a Dremmer (sp?) to make it smooth with the edge. laugh.gif So, I said F..It, I'll do it later! Strike, I'll PM you soon about the NiteShade. smile.gif
#7
Moderator
Looks real good. I like it. I'd just pull the bronze Hyundai logo off and replace with a chrome one. It's the only gold on the car. Other then that, the car looks real clean.
#8
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Elkhart, IN
Posts: 962
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2003 Tiburón GT
^^ Once upon a time.... they where gold, now they are faded and ugly. LOL It's the only thing I don't like of my car. I want to paint them flat black along with the antenna base.