My Photoshoot
#1
Senior Member
Thread Starter
Join Date: Apr 2005
Location: Malaysia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Had a photoshoot for an online article of the tib recently over the weekend.
Thought I'd share this with the rest smile.gif
Here are some teaser pics:
Click HERE for the full write-up and more pics.
Cheersss.
Thought I'd share this with the rest smile.gif
Here are some teaser pics:
Click HERE for the full write-up and more pics.
Cheersss.
#2
Senior Member
Join Date: Aug 2009
Location: Washington D.C.
Posts: 11,992
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Hyundai Tiburon FX
looks good, i think it does need a lower front end with the shark spoiler. i think any car with a big rear spoiler could use a lowered dam up front to balance the look. and also it looks like the spoiler is just a centimeter too far back from what i know. either the studs on the spoiler were like that or they are not drilled through the proper slots. maybe you wanted it that way? or it could be my imagination, perhaps the lighting playing tricks.
great update.
great update.
#3
Senior Member
Thread Starter
Join Date: Apr 2005
Location: Malaysia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
HKC: wow awesome observation there man. You are right, the spoiler does sit too far back a tad. I wanted a shark spoiler but w/o the stand in the middle, and I so happened to chance upon this spoiler on a visit to a local junkyard. What I didn't know was that the spoiler was custom made and the holes did not line up 02.gif
As for the front end, the entire car now sits higher than a stock RD1, this is because of the tires I'm using which are 235/45/17s. I can set the suspension lower but the tires would scrub.
Thanks for the comments smile.gif
As for the front end, the entire car now sits higher than a stock RD1, this is because of the tires I'm using which are 235/45/17s. I can set the suspension lower but the tires would scrub.
Thanks for the comments smile.gif
#5
Senior Member
Join Date: Sep 2007
Location: Boca Raton, Florida
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
VERY NICE! I bet its a hell of a sleeper..lol
Do you know any times it runs in the 1/4, or how much hp its got?
I would also like to know more on how you go tthe breaks to fit.
The ONLY thing I would recommend is get your tails tinted so they have a glossy finish, instead of the nightshard matte finish....
ONE of the best tibs ive ever seen...
Do you know any times it runs in the 1/4, or how much hp its got?
I would also like to know more on how you go tthe breaks to fit.
The ONLY thing I would recommend is get your tails tinted so they have a glossy finish, instead of the nightshard matte finish....
ONE of the best tibs ive ever seen...
#8
Senior Member
Thread Starter
Join Date: Apr 2005
Location: Malaysia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
<div class='quotetop'>QUOTE (Supercow @ Mar 11 2009, 12:55 AM) <{POST_SNAPBACK}></div><div class='quotemain'>looks nice! How difficult was it to adapt the brakes?</div>
Brakes weren't too difficult. Had to fabricate a bracket for it. But remember that not all rims will clear the caliper. So you must have rims with the right offset.
<div class='quotetop'>QUOTE (BlueRD2 (Jorge) @ Mar 11 2009, 02:18 AM) <{POST_SNAPBACK}></div><div class='quotemain'>VERY NICE! I bet its a hell of a sleeper..lol
Do you know any times it runs in the 1/4, or how much hp its got?
I would also like to know more on how you go tthe breaks to fit.
The ONLY thing I would recommend is get your tails tinted so they have a glossy finish, instead of the nightshard matte finish....
ONE of the best tibs ive ever seen...</div>
Thanks man smile.gif I don't have any 1/4 times or hp figures. Have yet to put it on a dyno.
Yeah I will probably go for a glossy tint for the tails once I got some sort of bodykit going on for the tib
<div class='quotetop'>QUOTE (Blue Bomber @ Mar 11 2009, 03:35 AM) <{POST_SNAPBACK}></div><div class='quotemain'>Car looks amazing man. Great job. Very nice tib. Love the bear keychain lol.</div>
LOL yeah it was a gift from the gf hitit.gif
Brakes weren't too difficult. Had to fabricate a bracket for it. But remember that not all rims will clear the caliper. So you must have rims with the right offset.
<div class='quotetop'>QUOTE (BlueRD2 (Jorge) @ Mar 11 2009, 02:18 AM) <{POST_SNAPBACK}></div><div class='quotemain'>VERY NICE! I bet its a hell of a sleeper..lol
Do you know any times it runs in the 1/4, or how much hp its got?
I would also like to know more on how you go tthe breaks to fit.
The ONLY thing I would recommend is get your tails tinted so they have a glossy finish, instead of the nightshard matte finish....
ONE of the best tibs ive ever seen...</div>
Thanks man smile.gif I don't have any 1/4 times or hp figures. Have yet to put it on a dyno.
Yeah I will probably go for a glossy tint for the tails once I got some sort of bodykit going on for the tib
<div class='quotetop'>QUOTE (Blue Bomber @ Mar 11 2009, 03:35 AM) <{POST_SNAPBACK}></div><div class='quotemain'>Car looks amazing man. Great job. Very nice tib. Love the bear keychain lol.</div>
LOL yeah it was a gift from the gf hitit.gif
#9
Moderator
wow. That's wonderful mang. Your paint looks as smooth as I've ever seen any paint, and I've seen some smooth paint before. What's your secret?
#10
Senior Member
Join Date: Mar 2006
Location: NAS Patuxent River, MD
Posts: 4,135
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2004 Volkswagen Jetta GLI
looks good...I agree w/HKC it is high but i understand why cuz off the tires...i know you dont like bodykits, from what the article said...i would add some sort of lip to the front, maybe someone could get you the Home Depot Lip just to offset the highness of the shark spoiler...
other thing is tails need clear coat on them...IMO
tib looks great regardless fing02.gif
other thing is tails need clear coat on them...IMO
tib looks great regardless fing02.gif