Custom Parts.. For Sale Soon.
11-22-2006, 02:39 PM
#1
Banned
Thread Starter
Join Date: Jun 2006
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
well some of my parts are done, the ones that i will be seilling soon.. i had a custom motor mount made.. the one pictured id the rear one.. for the front one, i used polyurethane caulk (like the 3m stuff but harder) and a bushing, shown in a couple of the pictures, to get rid of about .5" of slop.. the motor mount bushings are slip fit.
the linkage bushings are made from a very hard nylon i believe.
heres the motor mounts, bushings, and linkage bushings (one of the linkage bushings is a lil thicker which was custom for my application, cuz i have part of the beta II linkage, with the beta eyelit, which is why one is different)
enjoy. smile.gif
the air ram strut bars should be coming soon, as well as the B-pillar bars, my dads company just lost a HUGE GM project, so things are a little nuts over there right now.
the linkage bushings are made from a very hard nylon i believe.
heres the motor mounts, bushings, and linkage bushings (one of the linkage bushings is a lil thicker which was custom for my application, cuz i have part of the beta II linkage, with the beta eyelit, which is why one is different)
enjoy. smile.gif
the air ram strut bars should be coming soon, as well as the B-pillar bars, my dads company just lost a HUGE GM project, so things are a little nuts over there right now.
11-22-2006, 08:11 PM
#5
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
How long till there are some replacement bushings for the shifter. I mean the shifter itself, not the linkages.