Body Kit On : Stage 1 Done
12-27-2003, 06:38 AM
#1
Senior Member
Thread Starter
Join Date: Jun 2002
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
I have to get the skirts and rear pods molded and definently cover up the vent holes in the skirts with some extremely thick mesh so you can't see through it. The front bumper, wow, it like didn't line up at ALL, but somehow, it fit. I put on the whole thing with a buddy of mine. Took about 6 hours, with a one hour break and some skattered 5-10 minute breaks.
12-27-2003, 01:32 PM
#6
Senior Member
Join Date: Jul 2001
Location: Winnipeg
Posts: 4,828
Likes: 0
Received 0 Likes
on
0 Posts
Nice work for the shadetree mechanics tongue.gif
But what mods did you have to do?
IE:
- Fender liners lined up ok or how was it modded?
- What about the front rebar? I know on the 1st gens the Club GTR kit, you need to cut away like 1/2 the rebar (trust me, we did it to help put this one on: http://www.hyundai-owners.com/images/funda...cture%20092.jpg)
Anything else you needed to do to make it "fit"
But what mods did you have to do?
IE:
- Fender liners lined up ok or how was it modded?
- What about the front rebar? I know on the 1st gens the Club GTR kit, you need to cut away like 1/2 the rebar (trust me, we did it to help put this one on: http://www.hyundai-owners.com/images/funda...cture%20092.jpg)
Anything else you needed to do to make it "fit"
12-27-2003, 04:32 PM
#7
Senior Member
Thread Starter
Join Date: Jun 2002
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
It's the Club GT-R front and rear pods and then Cuda side skirts.
The front, well, one side would line up nearly perfect, but the other side was WAY off, but with some screw strength, it stayed in perfect place.
The side skirts were off, but not by much, just enough that they could fit extremely snug, however the top where the 'mr 2 vent' is sorta stuck out, so we had to drill into the car itself to make it stay, but the screw will be hidden, no worries.
The rear pods were easy. Figuring out how they were supposed to go was kinda weird, heh.
Also, it's honestly not that low, but if you look down to it from the front, it looks super low. All in all, super mean looking heh-heh..... all I need now is the speed to go with it lol.gif
The front, well, one side would line up nearly perfect, but the other side was WAY off, but with some screw strength, it stayed in perfect place.
The side skirts were off, but not by much, just enough that they could fit extremely snug, however the top where the 'mr 2 vent' is sorta stuck out, so we had to drill into the car itself to make it stay, but the screw will be hidden, no worries.
The rear pods were easy. Figuring out how they were supposed to go was kinda weird, heh.
Also, it's honestly not that low, but if you look down to it from the front, it looks super low. All in all, super mean looking heh-heh..... all I need now is the speed to go with it lol.gif
12-28-2003, 12:12 PM
#9
Senior Member
Join Date: Jun 2002
Location: Binghamton, NY
Posts: 1,137
Likes: 0
Received 0 Likes
on
0 Posts
looks awesome man, good job! where'd you end up getting the kit from? man, i love that kit. is the kit painted? it looks glossy, but way off from the white of the car in these pics...
