xxxmonoxidechild

well i finally finished up the box. and also got a few more parts for the stereo set up. so of course i had to take pics and share.


here's the box when i finished it, but without being covered yet, and also without the floating face piece.





and this is what it looks like all finished up.







and heres a few pics of the other goodies waiting to be put to use.

01tibby

and how eager are you to shove it all in? i know i had to summon every bit of restraint i have to put that stuff on the backburner as i was finishing other things on my car.

lookin good man. stereo stuff is soooooo much fun.

Caj Darkmoon

Looks like the same wire I used from my ebay kit for wiring up my last car... same fuse too.

xxxmonoxidechild

the wire is 0/1 gauge stinger, the fuse is a monster cable with a 100 amp wafer. that is the only old thing im reusing on this stereo. if anyone has been around for a looong time, i had that installed in my tiburon. at the time i was the only 0/1 gauge ran car that didnt drill to install it. it saved about $150 in wiring. but i still had to buy 24 ft of the clear, and 16 ft of the blue to run both batteries and such.

OzFxCoupe

The stuff looks tasty mate fing02.gif

Btw, weren't you flat broke only a few weeks ago??

SOCKS_old

looks good, i miss my system.. 02.gif prob will never put one in again, but i really miss the bass.. its just too much money to spend on amps, caps, etc.. specially when im dead broke, and addicted to boost, lol

Caj Darkmoon

<div class='quotetop'>QUOTE (xxxmonoxidechild @ Nov 22 2006, 12:08 AM) <{POST_SNAPBACK}></div><div class='quotemain'>the wire is 0/1 gauge stinger, the fuse is a monster cable with a 100 amp wafer. that is the only old thing im reusing on this stereo. if anyone has been around for a looong time, i had that installed in my tiburon. at the time i was the only 0/1 gauge ran car that didnt drill to install it. it saved about $150 in wiring. but i still had to buy 24 ft of the clear, and 16 ft of the blue to run both batteries and such.</div>

That's why I bought e-bay last time, and I will again this time when I put my subs in the Tib over christmas.

xxxmonoxidechild

<div class='quotetop'>QUOTE (OzFxCoupe @ Nov 21 2006, 11:08 PM) <{POST_SNAPBACK}></div><div class='quotemain'>Btw, weren't you flat broke only a few weeks ago??</div>
still am, things never change, im saving up for a few things for the tibby still too. hopefully be laying down sum low 15's before the track in WIS closes

pile_of_rd1

Hellz yea sucka!! I need to break my shit into the 17's. 02.gif

BTW.... That shit looks so nice in person.. the pics do absolutely no justice of that box, the scale of everything, the quallity.. I was happy with just over 150 dB's when I was into my systems... Pat knows his shit, and just wait til this shit gets SPL tested..... I wouldnt let your poochie sit in that 6.

DTN

why did you decide to port it to the front of the speakers? That causes the displacement to go right back into the cone. Usually on a pro job, they seal the front off. If it were me I'd find some way to open the ports on the side and keep the front away from the ports. Personally, I run sealed boxes because the chamber airspace required for ported is usually 25% more and sound quality suffers the same percentage with ported boxes. Ported boxes are louder though.

I had a friend who designed a box like this. He had the 12" speker box between the front seats of his truck and the baffle was on a hinge so the frequency of bandpass was adjustable.