Turbo & Supercharge (Forced Induction) Posts regarding Turbochargers, Superchargers and any other method for Forced Induction.

Turbo Piping.

Thread Tools
 
Old Jan 20, 2006 | 10:57 PM
  #1  
renante's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 289
Likes: 0
Default

http://photobucket.com/albums/y105/jmagoon...nt=DSC02914.jpg

the large piping on top of the Turbo manifold.
Where does the piping go?

I know the large piping from Airram goes to the intercooler.
Reply
Old Jan 20, 2006 | 11:26 PM
  #2  
TiburonWao's Avatar
Senior Member
 
Joined: May 2004
Posts: 736
Likes: 0
Default

To the intercooler....


It's just another possition because the end tanks of the intercooler fing02.gif
Reply
Old Jan 21, 2006 | 12:11 AM
  #3  
JonGTR's Avatar
Moderator
 
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Default

It goes up over the turbo and manifold to the intercooler, but it's better to go under it. It would eliminate 1 bend and keep it further from the heat of the manifold.
Reply
Old Jan 21, 2006 | 12:26 AM
  #4  
Alex01tib's Avatar
Senior Member
 
Joined: Mar 2006
Posts: 4,334
Likes: 0
From: Tampa/St Petersburg
Vehicle: Turbocharged 2001 Hyundai Tiburon
Default

/\ yup, if you have the turbo and it points up and you are making custom piping, clock the turbo to point down. Make sure your pipings protected or itll rust up real good
Reply




All times are GMT -6. The time now is 02:18 AM.