Turbo Bolt On Kit
I dont' know why, i have bought all the N/A mods and now always thinking to go for turbo setup. I dont' know what to do, Still i havent' finish setuping the N/A items. And today i have spoke to DTMspeed of Korea and they are willing to offer me the below turbo bolt on kit for USD 2450.00, and its a 220WHP kit. So let me know what shall i do? if i go for turbo i cannot use the remapped ECU and system GT header 421. so give your idea?? wink1.gif
**** DTM speed BE Kit (Stage 2) *****
* IHI RHF 5 turbo
* cast turbo manifolder
* Big Size Intercooler (450 hp 60 * 22.5 * 7cm)
* Aluminum Turbo Pipes
* Stainless Dawn Pipe
* 8 Turbo Silicon Tube & Vacum Hose
* Oil in/out Tube
* 8.5 : 1 Turbo Metal Head Gasket
* BOV
* 2.5 Bar mapsensor
* 550cc Injector * 4
* ECU Remapping (But here is korea .. we can't Remapping your ECU. just send "Remaped ECU with turbo data !"
* Pape of Instruction
BEkit Stage 2 2250 USD
ECU 200 USD
Total 2450 USD
**** DTM speed BE Kit (Stage 2) *****
* IHI RHF 5 turbo
* cast turbo manifolder
* Big Size Intercooler (450 hp 60 * 22.5 * 7cm)
* Aluminum Turbo Pipes
* Stainless Dawn Pipe
* 8 Turbo Silicon Tube & Vacum Hose
* Oil in/out Tube
* 8.5 : 1 Turbo Metal Head Gasket
* BOV
* 2.5 Bar mapsensor
* 550cc Injector * 4
* ECU Remapping (But here is korea .. we can't Remapping your ECU. just send "Remaped ECU with turbo data !"
* Pape of Instruction
BEkit Stage 2 2250 USD
ECU 200 USD
Total 2450 USD
I think you need to slow down and educate yourself about performance tuning - read everything you can about NA and turbo setups on:
this forum
hyundaiaftermarket.com/old
hyundaiperformance.com
I don't know about everyone else, but it seems to me like your just throwing money at your car with little understanding about what does what. If you take the time to educate yourself, you'll save yourself a lot of headaches (and money!)
this forum
hyundaiaftermarket.com/old
hyundaiperformance.com
I don't know about everyone else, but it seems to me like your just throwing money at your car with little understanding about what does what. If you take the time to educate yourself, you'll save yourself a lot of headaches (and money!)
I suggest you reading Maximum Boost by Corcky Bell. You will learn much from that book.
Maybe instead of thick head gasket spacer use low comp pistons. that way you can boost higher on the safe side.
Maybe instead of thick head gasket spacer use low comp pistons. that way you can boost higher on the safe side.
You have to do a lot of Homeworks and investigations to go Turbo..... and I think that Tim has a much better Turbo setup, plus he is always agree on helping you on any issue...
What I saw in that Kit is the ECU price.... I like it..... please PM me the website.... thanks,,,,
What I saw in that Kit is the ECU price.... I like it..... please PM me the website.... thanks,,,,
Have any of you answered the guy's questions?...
Yeah it's a pretty good deal, especially since you won't have to mess with a standalone. If it comes with a pre-programmed ECU, then you pretty much don't have to know anything more than the basics to run this kit. The ECU should tune it well, so you don't need to mess with that, but I would say that if you don't know how to install it yourself, you don't know how to do maintenance on it, and if you can't do either of those I would wait and do like the others suggested and read!
All this to beat the Supra?
Yeah it's a pretty good deal, especially since you won't have to mess with a standalone. If it comes with a pre-programmed ECU, then you pretty much don't have to know anything more than the basics to run this kit. The ECU should tune it well, so you don't need to mess with that, but I would say that if you don't know how to install it yourself, you don't know how to do maintenance on it, and if you can't do either of those I would wait and do like the others suggested and read!
All this to beat the Supra?
iQfOreVa: I am from Maldives
and i have found this kit from http://www.dtmspeed.com and the company CEO is Mr.Kim and i have spoke to him, he can speak english well and he is a nice man. you can refer to me so he will going to help you
and i have found this kit from http://www.dtmspeed.com and the company CEO is Mr.Kim and i have spoke to him, he can speak english well and he is a nice man. you can refer to me so he will going to help you
QUOTE (Viper @ Aug 9 2005, 10:38 AM)
I noticed Corcky Bell also wrote a book Supercharged! (I wonder what that is about tongue.gif lol)
offtopic.gif do anybody have that book in PDF? I can share with Max B00ST



