Hey guys!
I had some pics lying from my new motor which has been installed about 2 months ago.Its from my 1997 2L Hyundai Tiburon .I also have a HAltech E6X being installed but NO pics as of yet..
I also have the VHR Clutch System installed with the Quaifee LSD which i had for about 2 years Now..

I went with Weisco Foged Pistons 20 overbore(Whichthe tops were also Ceramic coated) ,Paurter Rods,Kspec Air Ram Intake manifold,Speed factor Turbo Kit minus the intercooler.I went with a 3inch thick core intercooler which i alraedy had and will post Pics of it when i get a chance on the car .

For now here are pictures of the Wesico Pistons .......

http://memimage.cardomain.net/member_image...37_177_full.jpg
http://memimage.cardomain.net/member_image...37_178_full.jpg
http://memimage.cardomain.net/member_image...37_180_full.jpg
http://memimage.cardomain.net/member_image...37_181_full.jpg

Pictures of pauter Rods
http://memimage.cardomain.net/member_image...37_184_full.jpg
http://memimage.cardomain.net/member_image...37_185_full.jpg
http://memimage.cardomain.net/member_image...37_187_full.jpg


Pictures of my Kspec Intake manifold with 70 MM Matching R-SIDE TB......

http://memimage.cardomain.net/member_image...37_188_full.jpg
http://memimage.cardomain.net/member_image...37_190_full.jpg
http://memimage.cardomain.net/member_image...37_191_full.jpg
http://memimage.cardomain.net/member_image...37_192_full.jpg
http://memimage.cardomain.net/member_image...37_193_full.jpg
http://memimage.cardomain.net/member_image...37_194_full.jpg


Pics of my Intercooler...........

http://memimage.cardomain.net/member_image...37_195_full.jpg
http://memimage.cardomain.net/member_image...37_196_full.jpg
http://memimage.cardomain.net/member_image...37_197_full.jpg
http://memimage.cardomain.net/member_image...37_198_full.jpg

Here are the Weisco Pistons and Pauter Rods installed.........

http://memimage.cardomain.net/member_image...37_213_full.jpg
http://memimage.cardomain.net/member_image...37_214_full.jpg
http://memimage.cardomain.net/member_image...37_216_full.jpg
http://memimage.cardomain.net/member_image...37_217_full.jpg
http://memimage.cardomain.net/member_image...37_218_full.jpg
http://memimage.cardomain.net/member_image...37_223_full.jpg

Here are some pics of the crank which was balanced

http://memimage.cardomain.net/member_image...37_224_full.jpg
http://memimage.cardomain.net/member_image...37_226_full.jpg
http://memimage.cardomain.net/member_image...37_227_full.jpg
http://memimage.cardomain.net/member_image...37_225_full.jpg

Here are Pics of my Front and Rear Urathane mounts from Rick....

http://memimage.cardomain.net/member_image...37_156_full.jpg
http://memimage.cardomain.net/member_image...37_157_full.jpg

Pic of my Quaifee LSD
http://memimage.cardomain.net/member_image...37_240_full.jpg

Pics of my Speedfactor Piping...Thanks to Tim :-)
I had them ceramic coated

http://memimage.cardomain.net/member_image...37_171_full.jpg
http://memimage.cardomain.net/member_image...37_170_full.jpg
http://memimage.cardomain.net/member_image...37_168_full.jpg
http://memimage.cardomain.net/member_image...37_169_full.jpg

FINALLY some pictures of the head Ported and Polished....Combustion chamber was Opened UP BIG TIME becuase teh HYundai Heads are very restrictive

http://memimage.cardomain.net/member_image...37_208_full.jpg
http://memimage.cardomain.net/member_image...37_212_full.jpg
http://memimage.cardomain.net/member_image...37_211_full.jpg
http://memimage.cardomain.net/member_image...37_206_full.jpg

Here is a pic BEFORE the COMBUSTION CHAMBER was opened up

http://memimage.cardomain.net/member_image...37_207_full.jpg

My motor was completely Balanced and Blueprinted
Here are some pics

http://memimage.cardomain.net/member_image...37_213_full.jpg
http://memimage.cardomain.net/member_image...37_214_full.jpg
http://memimage.cardomain.net/member_image...37_216_full.jpg
http://memimage.cardomain.net/member_image...37_217_full.jpg
http://memimage.cardomain.net/member_image...37_215_full.jpg

 

That is some mad hardware.

 

I like.. anybody got a shot of the head before it was ported like that? WHen you say restrictive.. I am thinking the valves are highly shrouded.

 

NICE! very nice set-up. Your car is going to be FAAASSTT!......AND it looks good!

I'm not jealous.......nope, not one bit!.......lol

Where are you in Canada? I want to meet your car in person! (..who cares about meeting you! just the car.....j/k man!)
You in east or west Canada? plz say west...

 

wow man! that's exactly how i wanna' go about mine after the motor poops out and i swap it.

nice work.

 

Thanks very much guys....

BTW Mad MAchine here is a pic of what the head Looked liek Before the combustion chamber was opened up
http://memimage.cardomain.net/member_image...37_207_full.jpg

 

wow, that's quite the difference.... you're right

 

look like you're just about ready to go man. Bet it's gonna haul some arse

 

Very nice setup. Where did you get the job done? What are your expextations with this setup (psi? 1/4 time?)

 

I got the job done at a Shop locally and regarding my Expectations WELL lets say that its gonna be a surprise :-)
With my Alpine kit i use to have installed in my Tibby i had 201 WHP on
10-11psi of boost on my 1.8L Motor...
I also was using 440cc injectors and as S-AFC with these numbers

Here was my old Dyno
http://memimage.cardomain.net/member_image...37_102_full.jpg