Mods that are a waste if going turbo.
#1
Senior Member
Thread Starter
Join Date: Sep 2001
Location: Dothan, AL
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2004 Tiburon GT
Mods that are a waste if going turbo.
Well, these mods appear here and there in different posts but we never combined them in one thread. What mods people should NOT get if they are planning to go turbo route? Header since it will need to be replaced. How about CAI? What else?
#3
headers
CAI
maybe nitrous, unless your evil
NA cams
NA high compression pistons
quad throttle bodies
dual throttle bodies
stage 2 clutch
electric supercharger
electric turbocharger
computer fans
2.25 exhaust
thats it for now
CAI
maybe nitrous, unless your evil
NA cams
NA high compression pistons
quad throttle bodies
dual throttle bodies
stage 2 clutch
electric supercharger
electric turbocharger
computer fans
2.25 exhaust
thats it for now
#5
QUOTE
JAWS 021:
headers
CAI
maybe nitrous, unless your evil
NA cams
NA high compression pistons
quad throttle bodies
dual throttle bodies
stage 2 clutch
electric supercharger
electric turbocharger
computer fans
2.25 exhaust
thats it for now
heh, so what exactly is the difference between an electric turbocharger, an electric supercharger, and a PC fan???headers
CAI
maybe nitrous, unless your evil
NA cams
NA high compression pistons
quad throttle bodies
dual throttle bodies
stage 2 clutch
electric supercharger
electric turbocharger
computer fans
2.25 exhaust
thats it for now
A bored/honed IM&TB will allow more air flow into to the engine and therefore would be beneficial to a turbo setup.
#7
QUOTE
BlueGT:
How about 58mm TB? Is it big enough? Or in this case, the bigger the better?
Not necessarily, in low turbo HP applications you don't really need a big T/B. Case and point second generation turbo Mitsubishi's come with a 50mm T/B. But when upping the power bigger T/B is always better.
How about 58mm TB? Is it big enough? Or in this case, the bigger the better?
#8
What exactly is a NA Cam? I was planning on gettin a Stage 2 VI Big Cam...replacement springs, FPR. But later on in life i'm planning on getting a turbo kit...are the cams replaced or something?