Atomic Speedware
Thread Starter
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
I just got done ordering my Pauter Rods for $745 + $14ship. eek.gif
Pauter refered me to them because they are the only ones that have them. Pauter does not have any on the shelf. And Atomic only has 1 set left.
I asked him about group buys. He said he can take 8-10% off his prices, which is about his jobber price. He will only need 5 to do this.
Pauter refered me to them because they are the only ones that have them. Pauter does not have any on the shelf. And Atomic only has 1 set left.
I asked him about group buys. He said he can take 8-10% off his prices, which is about his jobber price. He will only need 5 to do this.
Thread Starter
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
QUOTE (JonGTR @ Aug 25 2005, 10:19 AM)
I just got done ordering my Pauter Rods for $745 + $14ship. eek.gif
Thread Starter
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Crower said they wouldn't make them. Eagle said they will stock them soon/eventually.
Pauter makes several sets at a time. As of now, Atomic has the last of them. Once they are sold out, Pauter will make some more. A few for themselves, and a few for their suppliers (ex. Atomic). But it takes a while to make them.
Pauter makes several sets at a time. As of now, Atomic has the last of them. Once they are sold out, Pauter will make some more. A few for themselves, and a few for their suppliers (ex. Atomic). But it takes a while to make them.
Thread Starter
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Got the rods today. Damn they're about 3 times the width of the stock rods. I've got a pick of it next to the stock ones, I'll try to get later.
Motor is in the shop getting honed, decked, and dipped. It'll be done tomorrow I'll then start putting the bottom end together. Need to find bearings though.
Motor is in the shop getting honed, decked, and dipped. It'll be done tomorrow I'll then start putting the bottom end together. Need to find bearings though.
Thread Starter
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
The Pauter rods:
They're engraved with "Hyundai Tiburon" on the sides: cool.gif
Compared to the Beta I's eek5.gif Now you know why the bottom of the cylinder needs to be notched:
They're engraved with "Hyundai Tiburon" on the sides: cool.gif
Compared to the Beta I's eek5.gif Now you know why the bottom of the cylinder needs to be notched:
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: Sep 2008
Posts: 986
Likes: 0
From: Brampton Ontario
Vehicle: Two 97 RD Tibs and 2010 Genesis Coupe
Reminds me when i got my Rods from Paurter Last year.. smile.gif
Like you said Jon DEFENTLY get the bottom of the cylinder bores notched like i had to do with my Engine....
The rods look so DAM sweet i have another set of Paruter Rods and Weisco Pistons sitting right next to mewhich i just got tongue.gif tongue.gif
My back up project
HEHHEHE..........
Like you said Jon DEFENTLY get the bottom of the cylinder bores notched like i had to do with my Engine....
The rods look so DAM sweet i have another set of Paruter Rods and Weisco Pistons sitting right next to mewhich i just got tongue.gif tongue.gif
My back up project
HEHHEHE..........