Anyone with a big trubo on a an RD?
#1
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Croatia
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1999 Hyundai Tiburon
Anyone with a big trubo on a an RD?
Long time since I last posted. I am going on a bigger turbo and need to see any of your pics if you have an GT35 or larger turbo installed in your machine. Just to give me some ideas on how to route and set it up since it is a quite a big piece of blower :-D
#3
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Croatia
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1999 Hyundai Tiburon
Long time no see. WIll be coming more often now. It gets hard to get used to HA after RDT but I am getting there... slowly I am an old man
#4
Senior Member
Join Date: Nov 2008
Location: Huntsville, AL
Posts: 2,881
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001/Hyundai/Tiburon
I know it! A bunch of the old memebers are still here, and a bunch of the HA guys are still around. I think you'll get used to it pretty quickly.
#5
Senior Member
Join Date: Mar 2009
Location: Halifax N.S. Canada
Posts: 1,922
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 tib
Old men with orange tibbys is "in" !!.... Sup Hive???..... The only mod I'd have to do to upgrade from my gt 30 to a 35 would be a honda half core rad.
#6
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Croatia
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1999 Hyundai Tiburon
Hi Reg nice to be back. So you think that without half core GT35 (GT37 to be exact) wouldn't fit? I was thinking of moving blower's to the front push type and that with that I would gain enough space to push the big boy in. I have removed my stock RAD and put a Mishimoto GK rad in order to keep the damn thing cool (I was overheating all the time during summer). I presume it is an Honda Half core?
#7
Senior Member
Join Date: Mar 2009
Location: Halifax N.S. Canada
Posts: 1,922
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 tib
^^ honda sized (half core) would do it with push fans., I have a huge intercooler now,but stock fans are in front now, pushing through... you may need a slimline fan using a stock bumper., I have lots of room.
The rad is out in this pic too, but you can see the space i would have with a half core.
The rad is out in this pic too, but you can see the space i would have with a half core.
#8
Senior Member
Join Date: Feb 2010
Location: Kent, Wa
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 13 Gen Coupe Ult.
I have a GT35 on a Stock Rad and Fan, but a Custom Turbo Mani, keep the turbo really close to the block, i have about 5mm of space in between the turbo and the rad still, wouldnt work with out a Solid motor mount, but it works!
#9
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Croatia
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1999 Hyundai Tiburon
Well if you have a stock rad and fan and still managed to put in the GT35 then I shouldn't have any problems to put in my new GT37 boy with the pull fans being replaced for the push style fans and still keep my Mishimoto rad (too fancy to throw it out). Stock fans are around 3 cm thick so I would gain a 3 cm space (a bit more than 1 inch). With the custom manifold of course.