Transmission, Clutches, Shifters Posts regarding Transmissions. Clutches, torque converters, shift kits, Gear ratios, Limited Slip Differentals, etc for your Hyundai

clutch prob..please help!!

Thread Tools
 
Old Sep 19, 2001 | 04:54 AM
  #1  
RedShark's Avatar
Thread Starter
Senior Member
 
Joined: May 2001
Posts: 953
Likes: 0
Default clutch prob..please help!!

I did a search on this, but I didn't see anything that sounded like my problem. When I am stopped and the clutch is pushed in, when I release the clutch to start going, it makes this squeaky noise. It doesn't seem to do it when I'm shifting or anything (and if it does it's very faint), just when I'm at a dead stop starting. Also I've noticed it when I start the car. Does anybody know what this could be? sad.gif My tibby is injured sad.gif sad.gif
Reply
Old Sep 19, 2001 | 10:21 AM
  #2  
Random's Avatar
Super Moderator
 
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
Default

It's not injured...just Squeeky. Maybe you should change your name to Sqeekyshark!

The cluch cable and lever just needs some lube. Use some small drops of oil on the lever in the engine bay, and some cable lube on the cable. Should solve your Squeeks!
Reply
Old Sep 19, 2001 | 10:55 AM
  #3  
accent 1's Avatar
Senior Member
 
Joined: May 2001
Posts: 440
Likes: 0
Default

hey red does it squeek when you are driving if it does and only quits when you push the clutch in you could have a bad throw out bearing! But I would try randoms suggestion first to see if it helps! if not then I would guess the bearing is bad! wink.gif
Reply
Old Sep 19, 2001 | 01:07 PM
  #4  
RedShark's Avatar
Thread Starter
Senior Member
 
Joined: May 2001
Posts: 953
Likes: 0
Default

SQUEAKYSHARK?? Not funny!! LOL ok it was, but um... no. Thanks for the help as always Random rolleyes.gif
Reply
Old Sep 19, 2001 | 06:55 PM
  #5  
Random's Avatar
Super Moderator
 
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
Default

Throwout bearings usually don't "squeek" they "ping", "rattle", or worst case "grind". I have yet to hear one "squeek!"
Reply
Old Sep 19, 2001 | 10:50 PM
  #6  
Iago's Avatar
Senior Member
 
Joined: May 2001
Posts: 2,083
Likes: 0
Default

Boing!
Reply
Old Sep 20, 2001 | 12:30 PM
  #7  
accent 1's Avatar
Senior Member
 
Joined: May 2001
Posts: 440
Likes: 0
Default

in tech term they chirp to be exact! and loudly I might add!
Reply
Old Sep 20, 2001 | 01:26 PM
  #8  
2 UNIQ's Avatar
Senior Member
 
Joined: Aug 2001
Posts: 1,290
Likes: 0
Default

In the morning when i start my car it rattles then when i push in the clutch the noise goes away.This is defently my throw bearing.
The bitch part about this is that its a perfermance clutch kit just installed and have to take it apart again just to replace the throw baring
Reply
Old Sep 20, 2001 | 03:46 PM
  #9  
Random's Avatar
Super Moderator
 
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
Default

QUOTE
Originally posted by 2 UNIQ:
In the morning when i start my car it rattles then when i push in the clutch the noise goes away.This is defently my throw bearing.
The bitch part about this is that its a perfermance clutch kit just installed and have to take it apart again just to replace the throw baring


That rattle is the throw out bearing, or air in your hydraulic clutch causing it to not disengage completely. If your bearing went out so soon after they replaced the clutch, I'm thinking they installed the clutch/bearing wrong.
Reply




All times are GMT -6. The time now is 02:16 AM.