Turbo Tiburon Complete Part Out
Thread Starter
Senior Member

Joined: Feb 2010
Posts: 519
Likes: 0
From: Reynoldsburg, Ohio
Vehicle: 1998 Hyundai Tiburon
Debating a possible complete part out
Here is a parts list let me know what you guys think
No other aftermarket parts beside the ones listed all other parts are stock.
i listed a bit of stuff but not everything.
i know im probably not compliant with the pictures thing but if its ok i could post them upon request.
---------------------------------------------------------
**TURBO KIT*** Sold together or not at all
(1500 + shipping)
halaman boost controller
obx manifold (with added threaded wg flange)
tial 38 mm wg
turbo (ebay turbo)
****INLET 2"
****INTAKE 3"
****BEARING TYPE WET FLOAT BEARINGS
****OIL INLET 1/8 NPT
****COMPRESSOR .50 AR
****TURBINE .57 AR
****COMPRESSOR WHEEL 50.16 / 76.84
****TURBINE WHEEL 54.06 / 65.20
****FLANGE TYPE T3 FLANGE
****DOWN PIPE FLANGE TYPE 4 BOLT STANDARD
****COOLING TYPE oil cool
The BOV included in this kit is a replica of a Greddy Type-S push style BOV.
Jegs boost gauge 15 psi
Good bit of oil feed line
oil pan taped for oil drain
oil drain line
27"x6"x2.5" Bar/Plate Intercooler
Alum. Piping(already cut and fitted) comes with 4 extra cupplers and a ton of clamps
mustang 440cc green top injectors
aem wideband o2 + controller
Aem fic
-----------------------------------------------
Motor sold as one (unless all parts are spoken for) ( 1000 + pickup)
11:1 Beta motor rebuild less than 3k ago
-Head pressure tested, deck, cleaned and, polished (150 +shipping)
-pistons from kpec
-stock rods
-new thrust bearings
-new main bearings
-new rod bearings
-crank polished
-block honed and glazed
-new oil pump oem (80 +shipping)
-new water pump
-obx lightweight pulley (15 bucks less than cost of new shipped)
-Stock Intake manifold Port matched (30 +shipping)
-------------------------------------------------
Misc
-Stock unmodified intake manifold (20 + shipping)
-2.0 block 140,000+ miles (30 + shipping)
-Spare head needs new hla's (55 + shipping)
-AC components (50 + shipping)
-Automatic transmission(rebuild last year 2009) (400)
-blitz style front and rear bumper (120 + shipping)
-relatively new half shafts both sides(20 +shipping)
-01 seats(the blue swirls) (20+shipping
-HIds from some site i dont remember (40+shipping)
-2.0 cams (40+ shipping)
-working maf ( 20 + shipping)
-working tps (10 + shipping)
-left and right fenders ( 40 + shipping)
-working sunroof and accessories (35 + shipping)
-some sort of after market muffler (15 + shipping)
-stock tails (20 each + shipping)
-head lights (20 each + shipping)
-indent shape stock fx rims painted black with tires (120 local pickup)
-doors with power locks and windows ( 50 each local pickup)
-starter AUTOMATIC ( 20 + shipping)
-alternator (20 + shipping)
-stock injectors i have 8 ( 5 each +shipping)
-radiator (30 + shipping)
-iac ( 35 + shipping)
-stock coil pack very new ( have to look up what i paid for it)
-aftermarket speakers in rear ( 60 + shipping hardly used)(100 from best buy)
-gauge cluster ( 30 + shipping)
-----------------------------------------------------
Here is a parts list let me know what you guys think
No other aftermarket parts beside the ones listed all other parts are stock.
i listed a bit of stuff but not everything.
i know im probably not compliant with the pictures thing but if its ok i could post them upon request.
---------------------------------------------------------
**TURBO KIT*** Sold together or not at all
(1500 + shipping)
halaman boost controller
obx manifold (with added threaded wg flange)
tial 38 mm wg
turbo (ebay turbo)
****INLET 2"
****INTAKE 3"
****BEARING TYPE WET FLOAT BEARINGS
****OIL INLET 1/8 NPT
****COMPRESSOR .50 AR
****TURBINE .57 AR
****COMPRESSOR WHEEL 50.16 / 76.84
****TURBINE WHEEL 54.06 / 65.20
****FLANGE TYPE T3 FLANGE
****DOWN PIPE FLANGE TYPE 4 BOLT STANDARD
****COOLING TYPE oil cool
The BOV included in this kit is a replica of a Greddy Type-S push style BOV.
Jegs boost gauge 15 psi
Good bit of oil feed line
oil pan taped for oil drain
oil drain line
27"x6"x2.5" Bar/Plate Intercooler
Alum. Piping(already cut and fitted) comes with 4 extra cupplers and a ton of clamps
mustang 440cc green top injectors
aem wideband o2 + controller
Aem fic
-----------------------------------------------
Motor sold as one (unless all parts are spoken for) ( 1000 + pickup)
11:1 Beta motor rebuild less than 3k ago
-Head pressure tested, deck, cleaned and, polished (150 +shipping)
-pistons from kpec
-stock rods
-new thrust bearings
-new main bearings
-new rod bearings
-crank polished
-block honed and glazed
-new oil pump oem (80 +shipping)
-new water pump
-obx lightweight pulley (15 bucks less than cost of new shipped)
-Stock Intake manifold Port matched (30 +shipping)
-------------------------------------------------
Misc
-Stock unmodified intake manifold (20 + shipping)
-2.0 block 140,000+ miles (30 + shipping)
-Spare head needs new hla's (55 + shipping)
-AC components (50 + shipping)
-Automatic transmission(rebuild last year 2009) (400)
-blitz style front and rear bumper (120 + shipping)
-relatively new half shafts both sides(20 +shipping)
-01 seats(the blue swirls) (20+shipping
-HIds from some site i dont remember (40+shipping)
-2.0 cams (40+ shipping)
-working maf ( 20 + shipping)
-working tps (10 + shipping)
-left and right fenders ( 40 + shipping)
-working sunroof and accessories (35 + shipping)
-some sort of after market muffler (15 + shipping)
-stock tails (20 each + shipping)
-head lights (20 each + shipping)
-indent shape stock fx rims painted black with tires (120 local pickup)
-doors with power locks and windows ( 50 each local pickup)
-starter AUTOMATIC ( 20 + shipping)
-alternator (20 + shipping)
-stock injectors i have 8 ( 5 each +shipping)
-radiator (30 + shipping)
-iac ( 35 + shipping)
-stock coil pack very new ( have to look up what i paid for it)
-aftermarket speakers in rear ( 60 + shipping hardly used)(100 from best buy)
-gauge cluster ( 30 + shipping)
-----------------------------------------------------
Please read the For Sale forum rules and update this thread. You need pictures of products, and proof that they're yours (i.e., piece of paper with member name and date shown in pic).
Read the rules, and post the necessary changes. I'll give you a day before we close this - if the rules aren't followed, we'll close the thread.
We ask that you follow the rules so that both buyers and sellers are protected.
Read the rules, and post the necessary changes. I'll give you a day before we close this - if the rules aren't followed, we'll close the thread.
We ask that you follow the rules so that both buyers and sellers are protected.




