Turbo Tib. *feeler*
#1
Senior Member
Thread Starter
Join Date: Dec 2005
Location: York. About 2hrs from Philly and 4 hours from Pittsburgh
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Possibly getting rid of my car or the turbo kit. Not really sure what to make the price. I was thinking around $4500 for the turbo kit or $7000 for the whole car. This is not a for sale thread. Just gauging interest to see if anyone would be interested in buying.
Turbo Kit has approx 10k miles on everything.
Turbo kit would include:
Garrett T3 Super 60 turbo
Front Mount Intercooler
IC Piping
Silicone Couplers
Downpipe
Tial Wastegate
OBX Turbo Manifold
AEM Fuel Pressure Regulator
Oil/Fuel Lines
Vacuum Lines
Greddy Type RS BOV
NGK Wideband Air Fuel Ratio Gauge
APEXi Turbo Timer
Walbro 255lph Fuel Pump
Racetronix 525cc injectors
Blitz Electronic Boost Controller
Perfect Power SMT6 piggyback
Altier Turbo Box
Autometer Mechanical Fuel Pressure Gauge
Fuel Rail Adapted for AEM FPR
Car as a whole has some body work that could be done, but is not necessary. Light tuning needed. 86k on the frame/tranny. Approx 72k on the engine. Car has brand new tires. Mods (not including turbo kit):
Custom cat back exhaust
ACT Street Performance Clutch
Painted door panels
Spiide Shift Knob
Kenwood Head Unit
Engine Compartment
Turbo
Bumper is pretty ugly. Could move intercooler and replace with a new bumper.
New Tires
Exhaust
Dent
Some knicks throughout body such as these
Boost controller, turbo timer, afr gauge, headunit
Door panels
Turbo Kit has approx 10k miles on everything.
Turbo kit would include:
Garrett T3 Super 60 turbo
Front Mount Intercooler
IC Piping
Silicone Couplers
Downpipe
Tial Wastegate
OBX Turbo Manifold
AEM Fuel Pressure Regulator
Oil/Fuel Lines
Vacuum Lines
Greddy Type RS BOV
NGK Wideband Air Fuel Ratio Gauge
APEXi Turbo Timer
Walbro 255lph Fuel Pump
Racetronix 525cc injectors
Blitz Electronic Boost Controller
Perfect Power SMT6 piggyback
Altier Turbo Box
Autometer Mechanical Fuel Pressure Gauge
Fuel Rail Adapted for AEM FPR
Car as a whole has some body work that could be done, but is not necessary. Light tuning needed. 86k on the frame/tranny. Approx 72k on the engine. Car has brand new tires. Mods (not including turbo kit):
Custom cat back exhaust
ACT Street Performance Clutch
Painted door panels
Spiide Shift Knob
Kenwood Head Unit
Engine Compartment
Turbo
Bumper is pretty ugly. Could move intercooler and replace with a new bumper.
New Tires
Exhaust
Dent
Some knicks throughout body such as these
Boost controller, turbo timer, afr gauge, headunit
Door panels
#2
Senior Member
Join Date: Mar 2006
Posts: 5,754
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Tiburon
Goodluck finding a feeler. 4500 for the turbo kit? Over estimated by 45%, 7000 for the car? Over estimated by 45% lol
You'll soon realize that modding a car de-values its retail
You'll soon realize that modding a car de-values its retail
#3
^^^ ditto..
i would say you MIGHT be able to get ~2500$ for the turbo kit, and possibly get around 5000$ for the entire car w/turbo kit.
with that much miles, cut up front bumper, body flaws, car itself isnt worth much.
the turbo kit is a decent setup, but not worth anywhere close to 4500$ IMO.
i would say you MIGHT be able to get ~2500$ for the turbo kit, and possibly get around 5000$ for the entire car w/turbo kit.
with that much miles, cut up front bumper, body flaws, car itself isnt worth much.
the turbo kit is a decent setup, but not worth anywhere close to 4500$ IMO.
#7
Senior Member
Thread Starter
Join Date: Dec 2005
Location: York. About 2hrs from Philly and 4 hours from Pittsburgh
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Big- I'm already in the process of taking out the turbo kit. I have to take some pics, make an official list of everything included, re-evaluate the price, and repaint the ic piping. So i should have the kit ready to sell hopefully within two weeks.
tiburon354- If I cannot sell all the parts as a kit in a reasonable amount of time, then I would certainly be willing to part everything out piece by piece.
tiburon354- If I cannot sell all the parts as a kit in a reasonable amount of time, then I would certainly be willing to part everything out piece by piece.
#9
Senior Member
Thread Starter
Join Date: Dec 2005
Location: York. About 2hrs from Philly and 4 hours from Pittsburgh
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
^^^ I've been running 7~8 psi for about a year. Everything is still in pretty good condition. One of my ic pipes has a small dent in it though. No part has failed me yet though.
Lmk know if you need anymore info.
Lmk know if you need anymore info.