For Sale: Anybody Need A Guitar Amp?
Thread Starter
Moderator
Joined: Mar 2006
Posts: 6,976
Likes: 0
From: Arizona
Vehicle: N/A as in Not Applicable, not Naturally Aspirated
FOR SALE: Carver pm-125 Professional Power Amplifier, Retails for $300 new. This is an un-used item for sale at only $195 (shipping TBD).
The PM series was made for live sound reinforcement. It does 125 watts bridged into 8 ohms or 50 watts into 8 ohms in dual channel mono, or 65 watts per channel into 4 ohms, all at 0.1% thd, Convection cooled, no fans.
Specially designed for pro sound applications.
Rugged construction
Slim Profile
Lightweight (13lbs)
(Great for the road or a permanent installation).
Its accurate sound and ample power make it ideal for critical studio applications. The sophisticated protection circuits designed into this amplifier will protect your system should an unexpected fault occur.
The high standards that Carver products provide, embodies the quality that customers have come to expect.
Features:
1/4" TRS Input Jacks
Accepts Balanced or Unbalanced Lines
Headphone Jack
Power Ready, Signal Present and Clip/Protect Indicators for Each Channel
Specifications:
Power Output
8 ohms both ch driven 50W
4 ohms both ch driven 62W
8 ohms mono bridged 125W
Frequency Response; 0.75dB, 20Hz-20kHz
Slew Rate: >10V/u sec.
IM Distortion (SMPTE): <0.1%
Gain: High 26dB, Low 20.3dB
Input Sensitivity: 0.775V rms for rated power into 4 ohms
Input impedance: 22k Ohm Unbalanced
Input overload: +18dBu
Main power: 120/230 VAC 50 Hz
Power consumption: 250W at full power
Dimensions: 1u 19" std (1.75 x 13.25 x 19in)
Built-in protection circuitry
Lemme know, shipping wouldn't be too bad domestic... wink1.gif
-PG
The PM series was made for live sound reinforcement. It does 125 watts bridged into 8 ohms or 50 watts into 8 ohms in dual channel mono, or 65 watts per channel into 4 ohms, all at 0.1% thd, Convection cooled, no fans.
Specially designed for pro sound applications.
Rugged construction
Slim Profile
Lightweight (13lbs)
(Great for the road or a permanent installation).
Its accurate sound and ample power make it ideal for critical studio applications. The sophisticated protection circuits designed into this amplifier will protect your system should an unexpected fault occur.
The high standards that Carver products provide, embodies the quality that customers have come to expect.
Features:
1/4" TRS Input Jacks
Accepts Balanced or Unbalanced Lines
Headphone Jack
Power Ready, Signal Present and Clip/Protect Indicators for Each Channel
Specifications:
Power Output
8 ohms both ch driven 50W
4 ohms both ch driven 62W
8 ohms mono bridged 125W
Frequency Response; 0.75dB, 20Hz-20kHz
Slew Rate: >10V/u sec.
IM Distortion (SMPTE): <0.1%
Gain: High 26dB, Low 20.3dB
Input Sensitivity: 0.775V rms for rated power into 4 ohms
Input impedance: 22k Ohm Unbalanced
Input overload: +18dBu
Main power: 120/230 VAC 50 Hz
Power consumption: 250W at full power
Dimensions: 1u 19" std (1.75 x 13.25 x 19in)
Built-in protection circuitry
Lemme know, shipping wouldn't be too bad domestic... wink1.gif
-PG
