Pfs: Feeler Thread On Oz Spec Crank Pulley
Thread Starter
Senior Member
Joined: Mar 2007
Posts: 814
Likes: 0
Vehicle: 1997/Tiburon/FX
Well after admiting defeat I have only 2 options left. I tried tugging and pulling, Hammering, and even got a gear puller. My crank pulley will not come off. I swear its warped on there from being so old lol. I am going to call a shop around me to see what they'd charge to get mine off and put the new one on. If its too much or they dont want to do it I am going to sell.
This is for a brand new, and obviously never installed OZ Spec crank pulley made custom by col96fx. He only made a very limited amount of these and I was able to get ahold of one. This thing is in friggen perfect shape and weighs almost nothing(which is better for low-end power). If you have any questions refer to the page he has about these first.
Price is $140 shipped and will go to whomever pays me first. I will update this within a day or two for the final confirmation on what the shop says. Pending that, I will either let this go, or keep it. This is just the FEELER thread, for now!!
Click this link for more details:
http://www.rdtiburon.com/index.php?showtop...5&hl=pulley
This is for a brand new, and obviously never installed OZ Spec crank pulley made custom by col96fx. He only made a very limited amount of these and I was able to get ahold of one. This thing is in friggen perfect shape and weighs almost nothing(which is better for low-end power). If you have any questions refer to the page he has about these first.
Price is $140 shipped and will go to whomever pays me first. I will update this within a day or two for the final confirmation on what the shop says. Pending that, I will either let this go, or keep it. This is just the FEELER thread, for now!!
Click this link for more details:
http://www.rdtiburon.com/index.php?showtop...5&hl=pulley
Senior Member
Joined: Jul 2004
Posts: 1,487
Likes: 0
From: Adelaide, OZ
Vehicle: Hyosung GT650
Mate that's fvkd! When I did a mates car the pulley was f'ing tight, but I just kept tapping with a copper hammer, and pulling and it came off. After it came off, the new pulley slid straight on with no probs. Keep trying dude, you'll get there fing02.gif
Thread Starter
Senior Member
Joined: Mar 2007
Posts: 814
Likes: 0
Vehicle: 1997/Tiburon/FX
Update: Ive tried all I could, anymore force and it probably would have bent the pulley itself lol. So Im headin to this shop tomorrow after school. If they can do it for me great! laugh.gif, but if not then its sold. Its a reputible place, so Im leaning towards getting this done. I will update this again tomorrow or wednesday!
Senior Member
Joined: Mar 2006
Posts: 7,799
Likes: 0
Vehicle: 2001 Hyundai Tiburon
man if i were you id do whatever i could to get that damn thing off. im trying to think of what my brother did for his mr2 but cant remember. all i know is the thing was on there real tight and we finally got it off. anyway i hope youre able to use this still. good luck
