PFS: 1.8l Intake Cams Anyone?
#1
Moderator
Thread Starter
At the junk yard, theres a ton of 1.8 Elantras. I can get the cams for about $30-40. Anyone interested?
What do you think I should charge ya with shipping? wink1.gif
What do you think I should charge ya with shipping? wink1.gif
#2
Senior Member
Join Date: Dec 2004
Location: Muncie, Indiana
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
I would be interested as long as the cams are in good conditions. As for as price....thats something you would have to figure out on your own, but I wouldn't want to pay more than $50 personally.
#3
Moderator
Thread Starter
Shipped?
All the cams are in the motor with the valve covers still covering them.
I was gonna see about $60-70 depending on the cam cost. Remember, these are $110 on Kspec.
Should cost me $30-40 for the cam.
$10 to ship Priority Mail to you.
and some change to pull them from the motors myself and travel across town for them.
All the cams are in the motor with the valve covers still covering them.
I was gonna see about $60-70 depending on the cam cost. Remember, these are $110 on Kspec.
Should cost me $30-40 for the cam.
$10 to ship Priority Mail to you.
and some change to pull them from the motors myself and travel across town for them.
#5
Moderator
Thread Starter
These are solid metal. I dont see how one could possibly get damaged, especially still sitting in the motor.
Well, I'll look into it soon, and maybe buy one or two to sell here. If they sell quick, then I'll see about buying several more.
Well, I'll look into it soon, and maybe buy one or two to sell here. If they sell quick, then I'll see about buying several more.
#7
Senior Member
Join Date: Mar 2006
Location: tacos
Posts: 9,533
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 Elantra
<div class='quotetop'>QUOTE (kb5133 @ Jan 10 2006, 03:47 PM) <{POST_SNAPBACK}></div><div class='quotemain'>I would personally rather spend the extra $40 on a garaunteed new one. But I would pay $60 tops for a questionable used one.</div>
ive seen motors with thrown rods have useable cams
motors that locked due to not ever changing the oil still have useable cams
its a SOLID piece of metal and is made to withstand ALOT think about how fast that cam turns at redline
ive seen motors with thrown rods have useable cams
motors that locked due to not ever changing the oil still have useable cams
its a SOLID piece of metal and is made to withstand ALOT think about how fast that cam turns at redline
#8
Senior Member
Join Date: May 2006
Posts: 4,722
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Few ponies at the upper RPMs.
I may buy one from ya, have to see though, The Tib agitates me cause it doesn't wanna make any power with bolt-ons. I'm used to just upping the PSI for more power LOL.
I may buy one from ya, have to see though, The Tib agitates me cause it doesn't wanna make any power with bolt-ons. I'm used to just upping the PSI for more power LOL.
#10
Moderator
Thread Starter
Mini order with me? dunno.gif
Don't worry, I would never sell garbage. I'll check the lobes and journals for scarring, etc. fing02.gif
Don't worry, I would never sell garbage. I'll check the lobes and journals for scarring, etc. fing02.gif