It comes with all the mounting hardware in good condition?

And the intermediate plates are ok to use without any deglazing?

What is engagement like, probably smooth as butter huh?

I have a 1.8 Beta 1 trans in the car from my 97 tiburon now, but will likely go back to a beta 2 elantra transmission when I get a synchro kit, can you get them? Are the TOB's different between the two? If so, could you send me both?

Thanks again.

Oh, how long will those plates last me with fairly hard driving? And where the heck could I get replacements if you are not reachable when I need them?

And do you know the total weight of the flywheel and clutch?

Oh yeah, will the crankshaft fit in the end properly on my 98 tib? I know you have the beta 2 and the crank diameters changed in 99 correct? If it is smaller after 99 I can get it machined to the appropriate diameter, but if is already too large, maybe I can make an adapter or shim shaft or something??

 

It comes with all the mounting hardware in good condition?

>>>yup eveything is with it

And the intermediate plates are ok to use without any deglazing?

> yup if you want run a stone over them

What is engagement like, probably smooth as butter huh?

>LOL it depends on how well trained your foot is, i drove it in bumper to bumper traffic with no problem

I have a 1.8 Beta 1 trans in the car from my 97 tiburon now, but will likely go back to a beta 2 elantra transmission when I get a synchro kit, can you get them? Are the TOB's different between the two? If so, could you send me both?

> pm me the tranny code on the back of the tranny. if you have a part # list that would help me out even more.. The TOB will never go out and yes it is diffrent from oem pust this one is made for this clutch others would fall apart so to speak


Thanks again.

Oh, how long will those plates last me with fairly hard driving? And where the heck could I get replacements if you are not reachable when I need them?

> dont worry i will never leave this site i will pm you my Cell ##

And do you know the total weight of the flywheel and clutch?

> not right now but but i will find out when i get home.

 

do those msd wires have srtaight boots and one 0r two 90 degree angle boots that connect to the coil pack if your not sure take a pic and i will tell you. dibbs pending pics or an answer.

 

Anything on the flywheel diameter for the crank?

What do you need a TOB adapter for anyway, does the shaft on the trans not extend long enough for the push style or something? The diameters are the same between my two trannies, I used the same pull style TOB on both so... But if you could describe what the adapter does that would be great Jon.

Thanks.

And why the heck do you have srt4 plug wires? Arent they too short for our cars?

 

Wastegate paid.

 

<div class='quotetop'>QUOTE (rollwitstyle @ Jun 1 2008, 02:55 AM) <{POST_SNAPBACK}></div><div class='quotemain'>do those msd wires have srtaight boots and one 0r two 90 degree angle boots that connect to the coil pack if your not sure take a pic and i will tell you. dibbs pending pics or an answer.</div>
PM sent

<div class='quotetop'>QUOTE (Hive @ Jun 1 2008, 03:33 AM) <{POST_SNAPBACK}></div><div class='quotemain'>Wastegate paid.</div>
money recived

its a straight bolt up to to the crank a adpter is needed you must change the TOB collor witch is on the tranny because the pull one had a bigger OD then a push one.. that is why i need to know what tranny you have so i can get the right TOB collor. its a oem part nothing more

you dig...

 

Ahh thanks.

I'll have to let you know whether I feel like getting further into debt than I already am, lol.

 

hey madjohn, do you have straight sections of the SS manifold piping?

 

^yes and i can do you one better.. get me the specs you need and i will get it here for you


also i have for sale a set of RC-750cc injectors 322 shipped used them for 45 secounds...

 

just wondering have you sold the clutch yet? and im not sure if i read this correct, but it will bolt up to the stock side without problems, no real modifications, other than reposition the slave cyl and things correct?