For Sale Sell all your stuff here or use the Classifieds Section!

Parting Out! 97 Tiburon Fx Green

Old Dec 6, 2005 | 04:59 PM
  #41  
ichabod97's Avatar
Thread Starter
Member
 
Joined: Dec 2004
Posts: 53
Likes: 0
From: Jacksonville, FL
Default

tdonnell - 58k miles

There is still lots of parts left on this car:

-lots of interior parts (door panels, dash pieces, seats, headliner, hatch trim, etc.)

-engine (block, heads, intake manifold, a/c pump, water pump, tranny, drive shafts, etc.)

-suspension (factory struts & springs, suspension arms, sway bars, calipers, etc.)


I need to get this car stripped down more before i turn it into the junk yard...please help me out!!!
Reply
Old Dec 6, 2005 | 09:12 PM
  #42  
undacovatib's Avatar
Senior Member
 
Joined: Mar 2006
Posts: 403
Likes: 0
Vehicle: 1997 Hyundai Tiburon
Default

PM sent.
Reply
Old Dec 7, 2005 | 03:51 PM
  #43  
ichabod97's Avatar
Thread Starter
Member
 
Joined: Dec 2004
Posts: 53
Likes: 0
From: Jacksonville, FL
Default

Undacovatib - PM recieved and PM sent...
Reply
Old Dec 7, 2005 | 06:11 PM
  #44  
Jaws021's Avatar
Senior Member
 
Joined: Jul 2004
Posts: 2,005
Likes: 0
From: Los Angeles
Default



what about that? You would need to cut around it with like a saw or something

I need it to be cut around the welds like it is there.. i can remove it completely here so it can be prepped to be welded.

Shipping would be to Los Angeles..
Reply
Old Dec 7, 2005 | 08:13 PM
  #45  
ichabod97's Avatar
Thread Starter
Member
 
Joined: Dec 2004
Posts: 53
Likes: 0
From: Jacksonville, FL
Default

Jaws021 - that part of the car on the passenger side was pretty bent up...i don't think it is very salvageable...i could send you a pic though if you want to see it...
Reply
Old Dec 8, 2005 | 04:26 PM
  #46  
Jaws021's Avatar
Senior Member
 
Joined: Jul 2004
Posts: 2,005
Likes: 0
From: Los Angeles
Default

no its ok...

thanx

I need something still somewhat untouched...

What about the side engine mounts? The one that holds up the tranny by the hydraulic clutch and the one next to the cam gear?
Reply
Old Dec 8, 2005 | 05:58 PM
  #47  
ichabod97's Avatar
Thread Starter
Member
 
Joined: Dec 2004
Posts: 53
Likes: 0
From: Jacksonville, FL
Default

Jaws021 - i will have to check...i think they are both good. I know the engine was not touched in the accident so i'm sure they will still be good. I will be pulling parts tomorrow and/or Saturday...so i will check then and get back to you.
Reply
Old Dec 11, 2005 | 03:55 PM
  #48  
ichabod97's Avatar
Thread Starter
Member
 
Joined: Dec 2004
Posts: 53
Likes: 0
From: Jacksonville, FL
Default

Jaws021 - all the engine mounts are good. Let me know if need to pull them for you...
Reply
Old Dec 13, 2005 | 02:35 AM
  #49  
Jaws021's Avatar
Senior Member
 
Joined: Jul 2004
Posts: 2,005
Likes: 0
From: Los Angeles
Default

how much for the side mounts and inserts?

Also how much for the inserts for the front and rear mounts?

i dont need the mounts themselves for the front and rear... just the inserts.
Reply
Old Dec 26, 2005 | 05:15 PM
  #50  
ichabod97's Avatar
Thread Starter
Member
 
Joined: Dec 2004
Posts: 53
Likes: 0
From: Jacksonville, FL
Default

Ok...the engine is still bolted in the car along with the tranny...i still have all the seats and a majority of the interior parts. The hatch is still on, along with all the doors. The suspension is all intact with the exception of the passenger rear suspension arms and trailing arms...the point i'm getting to...

SOMEONE COME HAUL THIS THING OUT OF MY GARAGE!!! IT NEEDS TO DISAPPEAR BY January 20th!! And it does have a clear title...if that means anything!

Lots of parts still on ebay...and many more that are ready to go!
Reply



All times are GMT -6. The time now is 12:14 PM.