lots of stuff for sale for accents and whatever
#1
Member
Thread Starter
Join Date: Mar 2009
Location: adamstown, md
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 97/99/00 hyundai accents
lots of stuff for sale for accents and whatever
pics will be up tomorrow I forgot my camera at home tonight
I have:
4 16x7 white enkei nt03s(older model) +38 offset
wheels are sold
they have been on and off the cars for about 6 years but are still in pretty good shape
i'll take some pics tomorrow to show some of the curb rash but no bends and they still hold air just fine
the finish on the powdercoat is stained from years of brake dust but they still clean up alright
right now they have 2 kumho xs 215/45/16 and 2 kumho spts 205/40/16 mounted
the xs only have maybe 1000 miles on them and were raced on 3 times 2 of those in the rain
the spts are shot and would need to be replaced. the 215s fit on my x3 without spacers but rubbed the inner fenders at full lock, with spacers they fit without rubbing. 205/40/16s fit fine on x3s and lcs.
misc intercooler piping(make me an offer, i can ship this stuff)
it is custom plumbing made by gimp that was on my x3 with a dsm t25
I have hot and cold piping from the turbo to a front mount to the throttle body
if you want the front mount I can include that as well
this would take some of the work out of trying to make a custom turbo setup
black(purplish)tial 38mm wastegate 6psi spring($100 pickup $110 shipped)
this was on the car for less than 6 months but has some discoloring from the heat it still work perfect and I can include a screamer pipe with it if you want it.
dsm t25 turbo ($50 pickup $75 shipped)
needs a rebuild I reclocked it for use with my manifold and took off the wastegate(still have)
includes water lines and misc oil drain adapters
o2 housing for dsm t25/downpipe with 2 o2 bungs and 2.5 cat/2.5 exhaust with magnaflow resonator(make me an offer)
this was the turbo-back exhaust on my x3 the o2 housing blocks off the stock wastegate oulet on the turbo the exhaust itself is 2.5" crush bent exhaust that exits at the factory cutout on x3s. All of it would be pretty easy to modify to work with any accent.
bell engineering rising rate fpr($100 pickup $110 shipped)
this was used for less than a year and is still in perfect working order for vehicles with return line fuel systems. It has an adjustable gain for boost and an idle setting as well. Nicest fpr on the market by far.
1.5 sohc turbo manifold(make me an offer)
positions the turbo low for easier routing of the intercooler piping around the slave cylinder has a flange for a turbonetics or tial wastegate may work with others.
1.5 sohc intake manifolds and throttle body($30 pickup $50 shipped)
1.5 sohc fuel rail($10 pickup $15 shipped)
1.5 injectors($10 pickup $15 shipped)
evofusion short ram intake($40 pickup $50 shipped)
fits lc accents with the 1.6 probably will fit beta cars with a different tb coupler cars with a maf will have some difficulty fitting because of the 3" pipe and filter
evofusion front srut brace($40 pickup $50 shipped)
fits all lc/lc2 accents, came off a 1.6 lc
if I think of anything else i'll list it up
I live in central maryland very close to pa,va and wv borders.
contact me by email at ascort@email.com for quicker responses
paypal is fine
I have:
4 16x7 white enkei nt03s(older model) +38 offset
wheels are sold
they have been on and off the cars for about 6 years but are still in pretty good shape
i'll take some pics tomorrow to show some of the curb rash but no bends and they still hold air just fine
the finish on the powdercoat is stained from years of brake dust but they still clean up alright
right now they have 2 kumho xs 215/45/16 and 2 kumho spts 205/40/16 mounted
the xs only have maybe 1000 miles on them and were raced on 3 times 2 of those in the rain
the spts are shot and would need to be replaced. the 215s fit on my x3 without spacers but rubbed the inner fenders at full lock, with spacers they fit without rubbing. 205/40/16s fit fine on x3s and lcs.
misc intercooler piping(make me an offer, i can ship this stuff)
it is custom plumbing made by gimp that was on my x3 with a dsm t25
I have hot and cold piping from the turbo to a front mount to the throttle body
if you want the front mount I can include that as well
this would take some of the work out of trying to make a custom turbo setup
black(purplish)tial 38mm wastegate 6psi spring($100 pickup $110 shipped)
this was on the car for less than 6 months but has some discoloring from the heat it still work perfect and I can include a screamer pipe with it if you want it.
dsm t25 turbo ($50 pickup $75 shipped)
needs a rebuild I reclocked it for use with my manifold and took off the wastegate(still have)
includes water lines and misc oil drain adapters
o2 housing for dsm t25/downpipe with 2 o2 bungs and 2.5 cat/2.5 exhaust with magnaflow resonator(make me an offer)
this was the turbo-back exhaust on my x3 the o2 housing blocks off the stock wastegate oulet on the turbo the exhaust itself is 2.5" crush bent exhaust that exits at the factory cutout on x3s. All of it would be pretty easy to modify to work with any accent.
bell engineering rising rate fpr($100 pickup $110 shipped)
this was used for less than a year and is still in perfect working order for vehicles with return line fuel systems. It has an adjustable gain for boost and an idle setting as well. Nicest fpr on the market by far.
1.5 sohc turbo manifold(make me an offer)
positions the turbo low for easier routing of the intercooler piping around the slave cylinder has a flange for a turbonetics or tial wastegate may work with others.
1.5 sohc intake manifolds and throttle body($30 pickup $50 shipped)
1.5 sohc fuel rail($10 pickup $15 shipped)
1.5 injectors($10 pickup $15 shipped)
evofusion short ram intake($40 pickup $50 shipped)
fits lc accents with the 1.6 probably will fit beta cars with a different tb coupler cars with a maf will have some difficulty fitting because of the 3" pipe and filter
evofusion front srut brace($40 pickup $50 shipped)
fits all lc/lc2 accents, came off a 1.6 lc
if I think of anything else i'll list it up
I live in central maryland very close to pa,va and wv borders.
contact me by email at ascort@email.com for quicker responses
paypal is fine
#2
Senior Member
Join Date: Sep 2008
Location: USA
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 RD 4-door
damn, i just might come back to you again and buy those wheels, DIBS!!
I'd love to put a set of XL 205-40-16 ZR16 bfg g-force sport tires on those white beauty's,
are any of them bent to affect wheel balance? and are the wheels lightweight?
can u post pics of the wheels? or some of the pic's from hp.com
also, i don't need the 215 ecsta xs's, can you dismount and keep the tires and cut the price a-bit?
call me at 703-577-9302,
I'd love to put a set of XL 205-40-16 ZR16 bfg g-force sport tires on those white beauty's,
are any of them bent to affect wheel balance? and are the wheels lightweight?
can u post pics of the wheels? or some of the pic's from hp.com
also, i don't need the 215 ecsta xs's, can you dismount and keep the tires and cut the price a-bit?
call me at 703-577-9302,
#3
Senior Member
Join Date: Sep 2008
Location: USA
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 RD 4-door
I'm probably coming this week to pick those wheels, i'll let you know..
can you post some pics of the wheels close up?..juts wanna look at the details of the mags
can you post some pics of the wheels close up?..juts wanna look at the details of the mags
#6
Member
Thread Starter
Join Date: Mar 2009
Location: adamstown, md
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 97/99/00 hyundai accents
tak i'll try to get some closer pics of the wheels for you tomorrow on my day off
the strut brace is an lc piece which to my knowledge will not fit x3s, the manifold weighs about 10-15 lbs let me know your province and i'll get you a shipping quote.
if you want the intake or just the filter please email your info so I can get back to you fintile
again if anyone is interested please email me at ascort@email.com because I check that every day I don't check the message boards every day
the strut brace is an lc piece which to my knowledge will not fit x3s, the manifold weighs about 10-15 lbs let me know your province and i'll get you a shipping quote.
if you want the intake or just the filter please email your info so I can get back to you fintile
again if anyone is interested please email me at ascort@email.com because I check that every day I don't check the message boards every day