Headers, Eibachs, Intrax, MBRP, etc.
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
NM on the stuff from before, I'd still like to see the rims though.
That Cat. I've got dibs. Brand new?
Does it have an 02 bung?
That Cat. I've got dibs. Brand new?
Does it have an 02 bung?
Senior Member
Joined: May 2004
Posts: 2,214
Likes: 0
From: Bel Air, MD
This may seem like a strange request but I need 2 bolts....... One is the one that holds the the clip that the passenger side sun visor snaps into and the second is one of the bolts that goes into the dash right infront of the gauge cluster. There are two that you put in after the dash is back on that go right in front of the cluster but the bolts go up. Well if that makes any sense to you and you got them hit me up.
Moderator
Joined: Mar 2006
Posts: 6,976
Likes: 0
From: Arizona
Vehicle: N/A as in Not Applicable, not Naturally Aspirated
Ultra, I got the two bolts that go into the dash (I know what you're talking about), they're screws though, not really bolts...
I've been taking my dash in and out these past couple weeks and I don't put ALL the screws in when I know I'm going to be taking it off again in a week. My dash sits fine w/o them, it's plush agaisn't everything, don't really even need them...
But, I'll let Chris reply to you first and see if he has them for you (since this is his thread and all...) and if he doesn't I got you covered man...
-Patrick
by the way, he left for his cruise two days ago so I don't think he'll be replying until he gets back...I know I wouldn't be on here on MY vacation!
I've been taking my dash in and out these past couple weeks and I don't put ALL the screws in when I know I'm going to be taking it off again in a week. My dash sits fine w/o them, it's plush agaisn't everything, don't really even need them...
But, I'll let Chris reply to you first and see if he has them for you (since this is his thread and all...) and if he doesn't I got you covered man...
-Patrick
by the way, he left for his cruise two days ago so I don't think he'll be replying until he gets back...I know I wouldn't be on here on MY vacation!
Senior Member
Joined: Jan 2005
Posts: 259
Likes: 0
Well if Ultra can ask..
If anyone has one, I need a screw that goes to the high-beam/brights for an RD2.
I tried diff ones but their all too big.
If you take off the cap and look there is the light, and 2 screws on either side..
[]O[] if the O is the light, I need the one that holds down the metal plate..the left one..
If anyone has one, I need a screw that goes to the high-beam/brights for an RD2.
I tried diff ones but their all too big.
If you take off the cap and look there is the light, and 2 screws on either side..
[]O[] if the O is the light, I need the one that holds down the metal plate..the left one..
