Gi: Turbo Kit
Thread Starter
Senior Member
Joined: Mar 2006
Posts: 7,799
Likes: 0
Vehicle: 2001 Hyundai Tiburon
Want to check interest here on this because I am upgrading. The setup has about 50 miles on it if that. I had huge ECU problems and I just never got to drive the car. Everything I have here is top of the line stuff. All parts are quality pieces with really no expense spared. I am only selling because I am putting in my built motor and already have most of the replacement parts for the new stuff. If I add everything up it comes to just over 4k, but thats with clutch and injectors which I have to keep on the car for now. I am looking for 2750 shipped for it all.
Ramhorn Style manifold. Jethot coated black. Very thick steel and flanges. Set up for T3 turbo and External wastegate.
Garrett T3 Super 60 Turbocharger with upgraded internals (before anyone asks, Im not positive on what that means, when I bought it I got stage 3 internals because I wasnt getting it internally gated)
Tial 38mm Wastegate. Blue in color. Set up with spring for 4 psi right now. Also have a spring for 11psi I can put in.
Front Mount intercooler. Good size, no leaks at all when I pressure tested it to 20psi. Fills up my cuda 2 front and a little more.
2.5" stainless intercooler piping. Flanged for Greddy blow off valve. Fits perfect, only thing needed is to make adjustments to go a different way or remove washer bottle.
Can also include 3 inch downpipe but wont have a flange on it. Just would be a start to a custom exhaust.
Also can include head spacer to lower compression if anyone wants it. Leak tested every cylinder and never got any leaks with it.
Theoretically you could run this setup with just a fuel pressure regulator. I wouldnt recommend it at all but it is possible with low boost. Otherwise its capable of 300hp with proper tuning and a clutch. Any questions feel free to ask. I can have it off in a week or so if someone wants it now or it will be off the car in a month most likely. Mostly checking interest but I can sell it quick to. Ill grab some pics when its decent out and I have light. PM me for any more info or post.
Ramhorn Style manifold. Jethot coated black. Very thick steel and flanges. Set up for T3 turbo and External wastegate.
Garrett T3 Super 60 Turbocharger with upgraded internals (before anyone asks, Im not positive on what that means, when I bought it I got stage 3 internals because I wasnt getting it internally gated)
Tial 38mm Wastegate. Blue in color. Set up with spring for 4 psi right now. Also have a spring for 11psi I can put in.
Front Mount intercooler. Good size, no leaks at all when I pressure tested it to 20psi. Fills up my cuda 2 front and a little more.
2.5" stainless intercooler piping. Flanged for Greddy blow off valve. Fits perfect, only thing needed is to make adjustments to go a different way or remove washer bottle.
Can also include 3 inch downpipe but wont have a flange on it. Just would be a start to a custom exhaust.
Also can include head spacer to lower compression if anyone wants it. Leak tested every cylinder and never got any leaks with it.
Theoretically you could run this setup with just a fuel pressure regulator. I wouldnt recommend it at all but it is possible with low boost. Otherwise its capable of 300hp with proper tuning and a clutch. Any questions feel free to ask. I can have it off in a week or so if someone wants it now or it will be off the car in a month most likely. Mostly checking interest but I can sell it quick to. Ill grab some pics when its decent out and I have light. PM me for any more info or post.
