Gauging Interest: 1998 Auto Tiburon Part Out
#1
Senior Member
Thread Starter
Join Date: Feb 2007
Location: London, Ontario
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2011 Kawasaki ZX6R
Well since the queen took my turbo kit and won't give it back untill I pay $1606 canadian. I need some money and don't want to wait 3-5 weeks for paychecks. I want to know what people need and if there seems to be enough interest I will start parting out.
I realize there are a lot of part outs going on right now but here is hoping.
1998 Automatic Hyundai Tiburon:
118k miles on the entire car
All exterior parts in black primer
Headlights: 1 clear. 1 faded(believe PS is clear)
Corners: stock, PS bracket broken and just sitting in
Front Bumper: slight crack in top center, tab torn that holds PS tight to the fender
Rear Bumper: Nothing wrong
Tails: stock with a bit of primer, PS slightly scuffed in center from sand paper >.>
Stock exhaust from cat flange back, single cat car so straight pipes to the muffler
Interior is fully intact:1 or 2 plastic pieces may have crack at screws, need to check.
Regular gray clothe seats
Fenders: fine
stock springs: keeping my b&g's ;P
Stock rd1 flat spoiler
Stock rd1 shark spoiler(3 post, stock black color)
Alternator: need to check, thought it failed on the 5spd so swapped from this, turned out to be a melted wire, alt may be fine
PS Pump
Radiator: Few bent fins on engie side from alt....
1.8L cam: still in engine
Safc II
1G DSM BOV
That's everything I can think of off the top of my head. It is a full car aside from an alt and an exhaust mani. I can put the stock mani back on but the cat may not be good. Feel free to ask for anything.
Remember, this is just a guaging thread at the moment. Ths does not necessarily mean will definitely part out. Just need an option here.
Some shots of the car in october, hasn't been driven since:
Bumper tear:
Headlights:
flat spoiler:
Interior:
I realize there are a lot of part outs going on right now but here is hoping.
1998 Automatic Hyundai Tiburon:
118k miles on the entire car
All exterior parts in black primer
Headlights: 1 clear. 1 faded(believe PS is clear)
Corners: stock, PS bracket broken and just sitting in
Front Bumper: slight crack in top center, tab torn that holds PS tight to the fender
Rear Bumper: Nothing wrong
Tails: stock with a bit of primer, PS slightly scuffed in center from sand paper >.>
Stock exhaust from cat flange back, single cat car so straight pipes to the muffler
Interior is fully intact:1 or 2 plastic pieces may have crack at screws, need to check.
Regular gray clothe seats
Fenders: fine
stock springs: keeping my b&g's ;P
Stock rd1 flat spoiler
Stock rd1 shark spoiler(3 post, stock black color)
Alternator: need to check, thought it failed on the 5spd so swapped from this, turned out to be a melted wire, alt may be fine
PS Pump
Radiator: Few bent fins on engie side from alt....
1.8L cam: still in engine
Safc II
1G DSM BOV
That's everything I can think of off the top of my head. It is a full car aside from an alt and an exhaust mani. I can put the stock mani back on but the cat may not be good. Feel free to ask for anything.
Remember, this is just a guaging thread at the moment. Ths does not necessarily mean will definitely part out. Just need an option here.
Some shots of the car in october, hasn't been driven since:
Bumper tear:
Headlights:
flat spoiler:
Interior:
#3
Administrator
If you have power locks, I need the drivers side door actuator and latch assembly!!! My zip code is 14526, so let me know how much you want with shipping. smile.gif
#4
Senior Member
Join Date: Feb 2009
Location: Boston
Posts: 1,932
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2006 Pontiac GTO
^ Hmm I thought stock power locks (which just means that the passenger door is controlled by the driver's side lock/key) only have a passenger-side actuator?
#6
Senior Member
Join Date: Mar 2010
Location: Southern, Ohio
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1999 Hyundai Tiburon
I remember seeing something about this in the shoutbox. Why exactly is the "queen" making you pay to get your stuff back?
oh, and headlight shipped to 45660? either side, it's for one of my little experiments. laugh.gif
oh, and headlight shipped to 45660? either side, it's for one of my little experiments. laugh.gif
#7
Senior Member
Thread Starter
Join Date: Feb 2007
Location: London, Ontario
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2011 Kawasaki ZX6R
because they say they were unlawfully imported because the guy bringing them over said they were his and didn't have a reciept to prove it. So they sieed the goods by the time I got there and are making me pay 40% of the value plus provincial sales tax to get it all back.
I am going to try and appeal it to lower the cost, so untill that happens this is still going to be gauging interest. But some items I may sell either way, so keep asking guys
I am going to try and appeal it to lower the cost, so untill that happens this is still going to be gauging interest. But some items I may sell either way, so keep asking guys
#10
Senior Member
Join Date: Mar 2010
Location: Southern, Ohio
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1999 Hyundai Tiburon
So the guy bringing them to you was fibbing? or are customs or whatever it is, just trying to be asses, and not believing whats going on?