Fs: Zoned's Garage Sale (56k? It Might Be Awhile)
do you still have:
Misc. RD1 Switches + Assy. - $6
?
Im interested mostly in just the rear wiper one...
and youre selling that dimmer switch? LOL! Just look at the paint job man, its mint! hah
Misc. RD1 Switches + Assy. - $6
?
Im interested mostly in just the rear wiper one...
and youre selling that dimmer switch? LOL! Just look at the paint job man, its mint! hah
Thread Starter
Senior Member

Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
..............guys, cmon, read the thread.
the rear wiper switch is sold.
only one pass. window switch is sold, and the drivers is still avilable as well.
and these prices do not include shipping!!
also (again, this was previously stated in this thread) when you want something, please post your zip code so i can get quotes.
thanks guys.
oh yeah... TC, LOL. yeah, that paintjob r0x!
the rear wiper switch is sold.
only one pass. window switch is sold, and the drivers is still avilable as well.
and these prices do not include shipping!!
also (again, this was previously stated in this thread) when you want something, please post your zip code so i can get quotes.
thanks guys.
oh yeah... TC, LOL. yeah, that paintjob r0x!
Thread Starter
Senior Member

Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
ok....
still need your zip code
i have a feeling you did not read the descriptions on these items but you should know that the drivers side window switch it taken apart. i took it apart so i could solder a new color LED in but ended up never doing it .. it would really be dumb to solder it back together only to still use the same stock light. so if you still want it and are capable of this then i'll send it to you, i'm just guessing by previous experience that you didn't read the description or know the steps that must be taken to put it back together (meaning u have to solder the 2 long tabs down to the LED plate). also note it does not have power mirrors, i'm not sure if your tib does or not.
BUT if you knew all that, then on the other hand the driver's buttons and stuff aren't faded at all, they look good.
the pass one however is pretty faded on the bottom, but the cover to it is in mint condition. maybe you would just want the cover? or you can have both, it's probably not gonna sell otherwise so maybe i can just make you a better deal.
still need your zip code
i have a feeling you did not read the descriptions on these items but you should know that the drivers side window switch it taken apart. i took it apart so i could solder a new color LED in but ended up never doing it .. it would really be dumb to solder it back together only to still use the same stock light. so if you still want it and are capable of this then i'll send it to you, i'm just guessing by previous experience that you didn't read the description or know the steps that must be taken to put it back together (meaning u have to solder the 2 long tabs down to the LED plate). also note it does not have power mirrors, i'm not sure if your tib does or not.
BUT if you knew all that, then on the other hand the driver's buttons and stuff aren't faded at all, they look good.
the pass one however is pretty faded on the bottom, but the cover to it is in mint condition. maybe you would just want the cover? or you can have both, it's probably not gonna sell otherwise so maybe i can just make you a better deal.
Moderator


Joined: Feb 2009
Posts: 11,732
Likes: 5
From: Leesville, Louisiana
Vehicle: 2001 Hyundai Tiburon
I want A TPS, but i don't have an address to ship to this month. 02.gif
I'm going to call a "don't throw it out dibs". You don't have to hold it speciffically for me, but don't throw it out. I'll be interested in a month and a half when i get a firm addy.
I'm going to call a "don't throw it out dibs". You don't have to hold it speciffically for me, but don't throw it out. I'll be interested in a month and a half when i get a firm addy.
I gave you my zip....73145, and in reallity i just want new buttons that arent faded...not the rest of it. You can wait and if no one else wants it i'll buy the buttons for the driver side since they are in good condition.
Thread Starter
Senior Member

Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
oh i missed it sorry, my bad.
well, you know all about them now, so why don't you just tell me exactly what you want and then we'll talk about payment info ok? smile.gif
and for anyone who has bought anything all this stuff will go out sometime early-mid next week via USPS.
it's finals week next week so i'll be busy, but i'll try my best to get stuff shipped early.
well, you know all about them now, so why don't you just tell me exactly what you want and then we'll talk about payment info ok? smile.gif
and for anyone who has bought anything all this stuff will go out sometime early-mid next week via USPS.
it's finals week next week so i'll be busy, but i'll try my best to get stuff shipped early.
Senior Member

Joined: Mar 2006
Posts: 4,135
Likes: 0
From: NAS Patuxent River, MD
Vehicle: 2004 Volkswagen Jetta GLI
I would like to say that I got my black hyundai emblems yesterday and they are exact size of the oem ones...thanks zoned for the good service and fast shippment of them! fing02.gif
Thread Starter
Senior Member

Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
STILL FOR SALE
Ashtray + Cig Lighter + Assy. - $11
It's pretty dusty, but can be cleaned up easily. The door does not spring back and forth, you just have to open and close it yourself.

RD1 Shifter Surround - $11
As you can see there is a piece broken, this would be great to do a project on where you would mold the RD2 shifter surround/ring in, I decided I'm just going to attempt an entire RD2 dash conversion.

Misc. OEM Hoses - $3
Random intake hoses and clamps.

Misc. RD1 Switches + Assy. - $6
There is a front fog switch with 3 blank ones and the assembly. No bulbs are included. (rear wiper switch is SOLD)

Odometer - $4
Reads 68xxx miles, works.

Just random stuff - $3
There is an OEM RD1 clock lense, one of those covers for the bolts on your seat, a blue bulb that lights up your automatic (works, I remember having a hard time finding a blue one and they only came in 2 packs) shifting lights (P R N D 2 L), one of those blue filters you find inside your switches if you take them apart, and some random junk I don't know what it is but if you've taken your interior apart recently and realize you're missing something you might recognize it..

ONE KEFICO TPS -$22 (each)
The one on the right had the holes for the screws bored out so you could adjust your idle that way, but it can be used normally also, you just have to put two small washers over the screws so it holds it down tight. Both of these work. (one sold, ONE AVAILABLE)

Plastic "Vent" in your Hatch - $6
There's one of these on your driver's side in the back of the hatch, I think I was going to paint them and stick this on the pass. side to make it look more symmetrical, don't remember. One little corner is chipped off though, but it's not really noticable.

Rear View Mirror + Mount - $16
The place where the mount sticks on the mirror usually has a little plastic piece that goes around it so it can stay there and swivel (see 2nd pic), this got lost somehow. It would still be a great buy just to use the shell, the mirror, or the mount though.


Intake Manifold Tubing - $6
This is the more expensive vinyl stuff, it's soft but it's too hard to kink (so you won't end up like Patreezy lmao.gif). This is the stuff you will need to get if you buy an AIRRAM, and there is enough of it to do an AIRRAM install (you'll only need to buy the big 3/4" hose now). I believe that this is the 1/4" and 3/8" hoses, I don't remember if that's the right measurements, but it will work for the AIRRAM regardless, it's leftover from when I installed mine.

ONE Pass. Side Window Switch - $13
Works, just snap the cover on and plug it in. (one sold, ONE AVAILABLE)

OEM Black Pass. Side Door Handle Surround - $11
Yep.

Misc. Driver's Window Switch (complete but in pieces) - $8
There is enough stuff here to put together a full switch, the LED plate has been separated so you can solder in your own color LEDs, then just put it together. Keep in mind there is no power mirror feature on it.

Misc. Gauge Faces - $11
Complete set of RD1 gauges, extra RD1 tach, extra RD1 fuel/water temp, and extra RD2 tach. The extra RD1 fuel/water temp gauge has the idiot lights all colored out so you can install LEDs behind them with your own color.

Misc. Gauge Cluster Parts - $3
Got these from tibby01, I've never used them and never will, so if someone wants to experiment with gauges here's your chance, otherwise I'm throwing them away.

RSIDE Hood Spacers - $12
I think people with RD2s need these to install the AIRRAM. I don't know what the other stuff is (if you need it or not), it just came in the box that I got from 01roller, so it will go out with it too.

Mandrel-bent and Polished Intake Tube 3" dia - $11
I think this came off of my friend's Civic, maybe it can be used to do a little custom CAI on a tib, or if someone wants it for something else, I dunno..

RD1 Dimmer Switch - $12
Works, I will also include the cover for it (painted purple by tibbychick! lol)


Last chance before I throw some of this stuff away ... feel free to lowball me, prices are OBO, I'd rather give something to someone else rather than toss it if you can use it.
To the guys who bought stuff I have a list and I'm goin to the post office in the next few days, I'll post up when it's shipped.
Ashtray + Cig Lighter + Assy. - $11
It's pretty dusty, but can be cleaned up easily. The door does not spring back and forth, you just have to open and close it yourself.

RD1 Shifter Surround - $11
As you can see there is a piece broken, this would be great to do a project on where you would mold the RD2 shifter surround/ring in, I decided I'm just going to attempt an entire RD2 dash conversion.

Misc. OEM Hoses - $3
Random intake hoses and clamps.

Misc. RD1 Switches + Assy. - $6
There is a front fog switch with 3 blank ones and the assembly. No bulbs are included. (rear wiper switch is SOLD)

Odometer - $4
Reads 68xxx miles, works.

Just random stuff - $3
There is an OEM RD1 clock lense, one of those covers for the bolts on your seat, a blue bulb that lights up your automatic (works, I remember having a hard time finding a blue one and they only came in 2 packs) shifting lights (P R N D 2 L), one of those blue filters you find inside your switches if you take them apart, and some random junk I don't know what it is but if you've taken your interior apart recently and realize you're missing something you might recognize it..

ONE KEFICO TPS -$22 (each)
The one on the right had the holes for the screws bored out so you could adjust your idle that way, but it can be used normally also, you just have to put two small washers over the screws so it holds it down tight. Both of these work. (one sold, ONE AVAILABLE)

Plastic "Vent" in your Hatch - $6
There's one of these on your driver's side in the back of the hatch, I think I was going to paint them and stick this on the pass. side to make it look more symmetrical, don't remember. One little corner is chipped off though, but it's not really noticable.

Rear View Mirror + Mount - $16
The place where the mount sticks on the mirror usually has a little plastic piece that goes around it so it can stay there and swivel (see 2nd pic), this got lost somehow. It would still be a great buy just to use the shell, the mirror, or the mount though.


Intake Manifold Tubing - $6
This is the more expensive vinyl stuff, it's soft but it's too hard to kink (so you won't end up like Patreezy lmao.gif). This is the stuff you will need to get if you buy an AIRRAM, and there is enough of it to do an AIRRAM install (you'll only need to buy the big 3/4" hose now). I believe that this is the 1/4" and 3/8" hoses, I don't remember if that's the right measurements, but it will work for the AIRRAM regardless, it's leftover from when I installed mine.

ONE Pass. Side Window Switch - $13
Works, just snap the cover on and plug it in. (one sold, ONE AVAILABLE)

OEM Black Pass. Side Door Handle Surround - $11
Yep.

Misc. Driver's Window Switch (complete but in pieces) - $8
There is enough stuff here to put together a full switch, the LED plate has been separated so you can solder in your own color LEDs, then just put it together. Keep in mind there is no power mirror feature on it.

Misc. Gauge Faces - $11
Complete set of RD1 gauges, extra RD1 tach, extra RD1 fuel/water temp, and extra RD2 tach. The extra RD1 fuel/water temp gauge has the idiot lights all colored out so you can install LEDs behind them with your own color.

Misc. Gauge Cluster Parts - $3
Got these from tibby01, I've never used them and never will, so if someone wants to experiment with gauges here's your chance, otherwise I'm throwing them away.

RSIDE Hood Spacers - $12
I think people with RD2s need these to install the AIRRAM. I don't know what the other stuff is (if you need it or not), it just came in the box that I got from 01roller, so it will go out with it too.

Mandrel-bent and Polished Intake Tube 3" dia - $11
I think this came off of my friend's Civic, maybe it can be used to do a little custom CAI on a tib, or if someone wants it for something else, I dunno..

RD1 Dimmer Switch - $12
Works, I will also include the cover for it (painted purple by tibbychick! lol)


Last chance before I throw some of this stuff away ... feel free to lowball me, prices are OBO, I'd rather give something to someone else rather than toss it if you can use it.
To the guys who bought stuff I have a list and I'm goin to the post office in the next few days, I'll post up when it's shipped.


