FS: Turbulence Cnc'd Plexiglass Spare Wheel Cover
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Good luck finding someone to make you the trunk mat. LOL The guy I got mine from stopped making them years ago.
He made the whole set.
What I would do, if I were you, HONESTLY, is go buy a black & decker jigsaw, some metal cutting blades, and a couple of large sheets of diamond plate.
Pull out your stock stuff, put it on there, trace it with a sharpie (do this on the NON textured side of the steel), and cut it out yourself. File, grind, or sand down the edges a bit so they don't cut, drill holes for the carpet locators, and push them in place, smacking it with a rubber mallet to bend to shape.
Done.
Unfortunatley, all of the mats I've seen out there are made from different diamond plate than what you can commonly buy, to make the trunk piece.
And before you laugh, it was a SOLID mat for my trunk, I cut the center out myself using the method described above. Took about 45 seconds.
He made the whole set.
What I would do, if I were you, HONESTLY, is go buy a black & decker jigsaw, some metal cutting blades, and a couple of large sheets of diamond plate.
Pull out your stock stuff, put it on there, trace it with a sharpie (do this on the NON textured side of the steel), and cut it out yourself. File, grind, or sand down the edges a bit so they don't cut, drill holes for the carpet locators, and push them in place, smacking it with a rubber mallet to bend to shape.
Done.
Unfortunatley, all of the mats I've seen out there are made from different diamond plate than what you can commonly buy, to make the trunk piece.
And before you laugh, it was a SOLID mat for my trunk, I cut the center out myself using the method described above. Took about 45 seconds.