Fs: Turbo Kit
Thread Starter
Member
Joined: Jun 2006
Posts: 71
Likes: 0
Ok well I have been working on this project for a while but I looking for a new car so Im sell ing the kit
kit includes:
XD cast manifold
t3/t4 to4e turbo with 50 trim
intercooler is 24'' long 7'' high and 4'' thick
38mm Deltagate wastegate with custom dump tube
turbonetics raptor BOV
all piping and lines needed
also comes with greddy emanage(basic unit) w/ fuel injector harness,injector harness, and all software.
aftermarket fuel pressure regulator and all fittings and hoses
walbro 255lph fuel pump
also with extra OEM fuel rail and 4 OEM 180cc injectors
would recommend bigger injectors
all parts are used but in perfect working condition
asking $3200 USD
kit includes:
XD cast manifold
t3/t4 to4e turbo with 50 trim
intercooler is 24'' long 7'' high and 4'' thick
38mm Deltagate wastegate with custom dump tube
turbonetics raptor BOV
all piping and lines needed
also comes with greddy emanage(basic unit) w/ fuel injector harness,injector harness, and all software.
aftermarket fuel pressure regulator and all fittings and hoses
walbro 255lph fuel pump
also with extra OEM fuel rail and 4 OEM 180cc injectors
would recommend bigger injectors
all parts are used but in perfect working condition
asking $3200 USD
Banned
Joined: Jun 2006
Posts: 1
Likes: 0
wheres the manifold from..? does it have flange for the gate?
is that the subinjector harness? y u say injector harness 2X. just FYI, the buyer will need a dual fuel rail setup, cuz the additional injection map wont work right..
what brand of turbo is this? garrett?
which fuel pressure regulator is it?
bar and plate or finned IC? brand? ebay? thats quite big for an IC.
what hyundai has stock 180 cc injectors? thought they were 195cc (1.8L) and 245cc (2.0L) or something like that.
not to rain on ur parade but thats a really high asking price without any DP or IC piping or oil lines.
any hardware included with this 'kit'?
is that the subinjector harness? y u say injector harness 2X. just FYI, the buyer will need a dual fuel rail setup, cuz the additional injection map wont work right..
what brand of turbo is this? garrett?
which fuel pressure regulator is it?
bar and plate or finned IC? brand? ebay? thats quite big for an IC.
what hyundai has stock 180 cc injectors? thought they were 195cc (1.8L) and 245cc (2.0L) or something like that.
not to rain on ur parade but thats a really high asking price without any DP or IC piping or oil lines.
any hardware included with this 'kit'?
Thread Starter
Member
Joined: Jun 2006
Posts: 71
Likes: 0
The manifold does have the flange for the wastegate
sorry but I meant to say injector and ignition harness im providing an extra fuel rail.
it is a turbonetics turbo specs say 2.2'' inlet and 2.8'' outlet
its a ebay FPR it works fine.
It is a spearco intercooler and it is finned
as for the injectors I wasnt sure of the actual size someone said 180cc and I guess i was dumb for listening but they are the 245cc I guess They came out of a 2.0L tiburon motor.
It does come with a 3'' down pipe, I forgot to add that and also has all intercooler pipes and oil lines.
JW - do turbonetics turbos come stock in any cars
sorry I read back over it and this seemed unclear
I guess they are 245cc
I know they came out of a 2.0L tiburon.
sorry
sorry but I meant to say injector and ignition harness im providing an extra fuel rail.
it is a turbonetics turbo specs say 2.2'' inlet and 2.8'' outlet
its a ebay FPR it works fine.
It is a spearco intercooler and it is finned
as for the injectors I wasnt sure of the actual size someone said 180cc and I guess i was dumb for listening but they are the 245cc I guess They came out of a 2.0L tiburon motor.
It does come with a 3'' down pipe, I forgot to add that and also has all intercooler pipes and oil lines.
JW - do turbonetics turbos come stock in any cars
sorry I read back over it and this seemed unclear
I guess they are 245cc
I know they came out of a 2.0L tiburon.
sorry
Senior Member
Joined: Mar 2006
Posts: 4,334
Likes: 0
From: Tampa/St Petersburg
Vehicle: Turbocharged 2001 Hyundai Tiburon
how would the person install the 4 extra injectors? without a spacer or a manifold with bungs and tapped bolt holes for the fuel rail securing bolts you wont be able to just slap 4 extra injectors on there. Also the fuel rail seals when the injectors are in and the securing bolts are tightened down on the stock rail.
Denisst's spacer kit is nice because it allows you to use whatever size/shape injector you want because the rail comes with different size tightening bolts that have threads on each end.
Denisst's spacer kit is nice because it allows you to use whatever size/shape injector you want because the rail comes with different size tightening bolts that have threads on each end.
