FS: Tigerlily Hyper U turbo motor
10-08-2004, 12:09 AM
#1
Senior Member
Thread Starter
Join Date: May 2001
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Re: new stereo system ?
im sellign my tigerlily hyper u 8.5:1 motor
the head has some mild port work done to it... nothing major just cleaned up the ports a lil
8.5:1 tigerlily hyper u pistons
new crank and rod bearings
new head gasket
new head studs
since the rebuild it has maybe 5k miles on it... 2k are @ 300+ whp.... it still has even compression through all 4 cyl
ill let it go for 450 bux complete with intake manifold and throttle body
the parts in it alone are worth 600
the motor will be removed from the car mid november ish
the head has some mild port work done to it... nothing major just cleaned up the ports a lil
8.5:1 tigerlily hyper u pistons
new crank and rod bearings
new head gasket
new head studs
since the rebuild it has maybe 5k miles on it... 2k are @ 300+ whp.... it still has even compression through all 4 cyl
ill let it go for 450 bux complete with intake manifold and throttle body
the parts in it alone are worth 600
the motor will be removed from the car mid november ish
10-08-2004, 12:21 AM
#3
Senior Member
Thread Starter
Join Date: May 2001
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tibby01's LED Stuff
no its not 450 shipped... do u want pics of it in the car er what
if u go here http://www.cardomain.com/id/viper966
u can see pics of it coming together.... i dunno what kinda pics ud want... it loox like a stock hyundai motor form the outside i guess haha
No double posting please smile.gif
umm list of whats included
long block
which means
engine block
stock oil pan (i can weld a return bung on it for u for free if u wish but its hard to say where the best placement is for your setup....)
new crankshaftt bearings
new con rod bearings
new head bolts
new head gasket
new tigerlily pistons
new pistons rings
intake manifold
throttle body
head already has allen key hole opened up for oil feed
mild exhaust porting... nothing special
stock fuel rail (will weld -6an bung on fuel rail for 20 bux)
ill also include 470 cc injectors for an extra 200
if u go here http://www.cardomain.com/id/viper966
u can see pics of it coming together.... i dunno what kinda pics ud want... it loox like a stock hyundai motor form the outside i guess haha
No double posting please smile.gif
umm list of whats included
long block
which means
engine block
stock oil pan (i can weld a return bung on it for u for free if u wish but its hard to say where the best placement is for your setup....)
new crankshaftt bearings
new con rod bearings
new head bolts
new head gasket
new tigerlily pistons
new pistons rings
intake manifold
throttle body
head already has allen key hole opened up for oil feed
mild exhaust porting... nothing special
stock fuel rail (will weld -6an bung on fuel rail for 20 bux)
ill also include 470 cc injectors for an extra 200
10-08-2004, 04:49 AM
#4
Senior Member
Join Date: Apr 2003
Posts: 2,241
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: G-tech and Pyrometer
wow.. this is a deal! if i wasnt rebuilding an engine with a 1.8 crank and 1.8 intake cam i'd be all over this.
just for more info are those stock rods?
just for more info are those stock rods?
10-08-2004, 06:30 AM
#5
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: Gentex Rear-View Mirrors
Viper, don't double post man, come on!
Someone fix it, I gotta run to work.
Someone fix it, I gotta run to work.
10-08-2004, 09:02 AM
#7
Senior Member
Thread Starter
Join Date: May 2001
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: reverse halo gauges for 00-01 tibby
im selling to build a bigger badder motor because i have a haltech now.... yes they are stock rods... but stock rods are good to about 400 WHP and people without a stnadalone wont even come close to that
and dweet why are u building with a 1.8 crank? its the same as the 2.0 the differance between the two motors is the deck height and piston height... did u see randoms post on HA comparing the two?
and dweet why are u building with a 1.8 crank? its the same as the 2.0 the differance between the two motors is the deck height and piston height... did u see randoms post on HA comparing the two?
10-08-2004, 10:12 AM
#9
Senior Member
Join Date: Nov 2002
Posts: 4,694
Likes: 0
Received 0 Likes
on
0 Posts
Re: The last pics of the season for me
Why don't you just build up a stronger engine from this one?
I might be interested though, just need to talk to my dad where I could store the engine for now.
How much would shipping be to MD 21117. Is there any way you could drive it to me since you are only 2.5 hours away? Of course I'd pay for the gas and tolls. I will get back at you if I can get it or not.
I might be interested though, just need to talk to my dad where I could store the engine for now.
How much would shipping be to MD 21117. Is there any way you could drive it to me since you are only 2.5 hours away? Of course I'd pay for the gas and tolls. I will get back at you if I can get it or not.
10-08-2004, 10:15 AM
#10
Senior Member
Thread Starter
Join Date: May 2001
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Tigerlily Hyper U turbo motor
<div class='quotetop'>QUOTE (OdessitPashka)</div><div class='quotemain'>Why don't you just build up a stronger engine from this one?
I might be interested though, just need to talk to my dad where I could store the engine for now.</div>because... all the new parts in it woudl be replaced if i opened it back up again (head gasket+ studs) and the rings would neeed to be replaced to be put into somebody elses motor...a nd i have a whole new motor in my garage already... so i figure why not help somebody esle out and give em a pre built motor....
JUST ADD TURBO haha
I might be interested though, just need to talk to my dad where I could store the engine for now.</div>because... all the new parts in it woudl be replaced if i opened it back up again (head gasket+ studs) and the rings would neeed to be replaced to be put into somebody elses motor...a nd i have a whole new motor in my garage already... so i figure why not help somebody esle out and give em a pre built motor....
JUST ADD TURBO haha