FS: reverse halo gauges for 00-01 tibby
10-08-2004, 05:30 AM
#1
Senior Member
Thread Starter
Join Date: Oct 2004
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
10-08-2004, 04:20 PM
#4
Senior Member
Thread Starter
Join Date: Oct 2004
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Re: My Show Winner
I placed the night photo from the auction where I bought these gauges in my gallery. I figured seeing the guy never responded to my emails that I would just borrow one of his pics so you guys could see them, I am not very picture savvy when it comes to message boards.
10-08-2004, 04:45 PM
#9
Senior Member
Thread Starter
Join Date: Oct 2004
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: reverse halo gauges for 00-01 tibby
The hardest part for me was taking apart the dash, but once you get to the instrument cluster its a piece of cake. Just take the cluster apart slide the gauges over the needles, just be very careful while you are doing this. Might have to use glue to keep gauges in place. You then run the wires out of the cluster and close her back up and replace into the dash making sure you have access to those wires. Then plug the ground and 12v wire into the fuse panel. These things do come wth instructions and its pretty self explanitory when you see them.
10-08-2004, 04:58 PM
#10
Senior Member
Join Date: Mar 2006
Posts: 9,172
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001/Hyundai/Tiburon
Re: Calling out javageek
he pretty much said it all. i would use some thin double stick tape though(like the double sided scotch tape) to hold the new faces down though, not glue. i would also wire it right into the dimmer switch, its much closer. power to green/white wire coming off the dimmer switch, ground to black wire.