Fs: Mbrp Exhaust + Hi-flow Cat
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
For sale is my MBRP exhaust.
This is (was, they're not made anymore) the best exhaust for our cars.
2.25" diameter piping
3.5 or 4" diameter round MBRP muffler
I will also include my catco 2.25" hi-flow cat, it already has the correct flanges welded on and everything, also has an o2 bung welded in after the cat. (this is about a $120 value on its own) This quiets the exhaust down a LOT, and makes it emissions-friendly.
I will also throw in the stainless steel hangers + nuts + bolts I bought, so you won't have to buy your own, and they won't rust (like $10)
Old photo (test pipe not included, im giving you my catco cat instead anyway):
This system is completely ready to bolt up, and your car will be emissions-friendly, and no CELs.
Looking to get $304.50 + shipping (i'll split the paypal fees with u, that's what the 4.50 is for)
This will only be for sale for about a week-10 days, if it doesn't sell by then I'll just keep it, or maybe sell locally to my cousin who bought my old tib.
This is (was, they're not made anymore) the best exhaust for our cars.
2.25" diameter piping
3.5 or 4" diameter round MBRP muffler
I will also include my catco 2.25" hi-flow cat, it already has the correct flanges welded on and everything, also has an o2 bung welded in after the cat. (this is about a $120 value on its own) This quiets the exhaust down a LOT, and makes it emissions-friendly.
I will also throw in the stainless steel hangers + nuts + bolts I bought, so you won't have to buy your own, and they won't rust (like $10)
Old photo (test pipe not included, im giving you my catco cat instead anyway):
This system is completely ready to bolt up, and your car will be emissions-friendly, and no CELs.
Looking to get $304.50 + shipping (i'll split the paypal fees with u, that's what the 4.50 is for)
This will only be for sale for about a week-10 days, if it doesn't sell by then I'll just keep it, or maybe sell locally to my cousin who bought my old tib.
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
It dynoed the best, that's why. LOL.
But, that was before the apexi, which is probably the best for our cars, but its also 2.5", sooo its only the best for high n/a power, or mild boost setup. 2.25" suits the average person, and you won't lose any low-end like you may with 2.5" (depends on your setup obviously) ... Then there's the fact that the apexi comes with a $599+shipping price tag ($499 for the GB), and you'll have to wait weeks to get it from Korea, and after that you'll have to find a 2.5" hi-flow cat, get flanges and o2 bungs welded on to keep it quiet/environment-friendly/legal...
Mine is complete, and ready to bolt-up.
But, that was before the apexi, which is probably the best for our cars, but its also 2.5", sooo its only the best for high n/a power, or mild boost setup. 2.25" suits the average person, and you won't lose any low-end like you may with 2.5" (depends on your setup obviously) ... Then there's the fact that the apexi comes with a $599+shipping price tag ($499 for the GB), and you'll have to wait weeks to get it from Korea, and after that you'll have to find a 2.5" hi-flow cat, get flanges and o2 bungs welded on to keep it quiet/environment-friendly/legal...
Mine is complete, and ready to bolt-up.
