FS: MANY performance parts and some oem parts
Thread Starter
Senior Member
Joined: Mar 2006
Posts: 5,754
Likes: 0
Vehicle: 1997 Tiburon
FS: MANY performance parts and some oem parts
Spring is coming and tax season is around the corner. It's time to clear out the garage so these are items are super low prices and about the lowest I can go without donating them lol 
If you feel a price isn't fair pm me and let me know why and how much it's "really" worth. Items include shipping unless stated otherwise. Dibs is 24hours only, then it's next in line. PAYPAL: itsamemario_ @ hotmail.com (remove spaces)
Stock 2.0 240cc injectors with 3000 miles. Great for upgrading from 1.8 190cc. - 35shipped. Dealer charges 70$ for 1 injector.
Stock steering wheel with airbag. Dealer charge is 410$ for just the airbag - 40shipped
Reactive SS shift knob - 15shipped.
Automatic raising AM/FM antenna. Worked great and retracts when radio is turned off for a sleeker look and yet still receives great reception. $40 shipped.
RD1 Dash cruise/wiper/defogger module. $5 if thrown in with another item.
Stock fuel filter 100 miles on it, with stock lines. - 30 shipped
Stock Fuel pump - $30 shipped
Small profile oil catch can - $20shipped
16x7 114.3 x 4 Wheels made by mrr tr2's. These wheels have been run on the car for a total of 11 months. They are black with a polished lip. They are in overall good shape, no bends, cracks etc. One does have some curb rash not very noticeably unless your up close. One also has tiny scratches on the face of the rim from when I first had them shipped to me. I believe they put them face down on cement. I was going to repaint them, but I didn't bother. They looked fine for me.
They come wrapped with Estca Supra 712 tires. These tires are fantastic on dry and wet. They grip in corners real well and has a nice stiff sidewall to reduce body roll. Tire size is 215/45/16 and have good amount of tread on them. These wheels and tires never seen snow/salt.
The KUMHO ECSTA Supra 712 Directional tread was developed to meet the very highest demands of those drivers who require the absolute best in handling and traction. With its European design and styling, the ECSTA Supra delivers Ultra High Performance.
SPECIAL FEATURES
* Advanced Silica tread compounding for superior wet & dry traction and handling.
* Large lateral and center channels provide maximum water evacuation.
* Advanced directional tread design for superior acceleration, braking and cornering.
* Two durable nylon cap plies give high speed stability and resistance to centrifugal forces.
* Two wide steel belts provide excellent cornering power and stable footprint.
* Rim Protector in the lower sidewall safeguards wheel against scratches and abrasions.
Only $350+shipping. Please rock these for me this spring/summer as I don't have the space to store them.
4 custom made 1" hub centric wheel spacers. These are made out of 6061 aluminum and machined by yours truly. Reason I made them was because there were no quality hub centric wheel spacers on the market that didn't have the double bolt through fastening. I find those very unsafe. Instead of 4 lugnuts, you have 8 per wheel to worry about. Thats 32 in total, NO THANKS. These utilize the stock studs. How you might ask? I ordered longer ARP knurled studs 150,000psi breaking strength and machined them to the length I needed to cover 1" spacers. The hub was then machine to accept 1/2"-20 studs instead of our smaller 12mm. These are beefier and much stronger then stock studs and safe to use with spacers. They also provide extended knurle which the spacers press into for even extra safety. Took me 43 hours total to make these. I was also sick of hub rings so the outside of the spacer is machined for 67mm bore so you dont need to run hub centric rings.
You will gain a wider track by 2" with these which improves handling and also fills in fender/bumper gaps. Lets the wheel sit flush with the body lines. This is not some kind of backyard creation. These were professionally hand made at my machine shop, these are quality pieces. With the new project being 5 lug, I will not have use for these and will have to make new ones. I'm in no rush to sell these as they dont take up much space.
I looked on ebay, you still can't buy 1" hubcentric wheel spacers in 4x114.3. Kspec sells shitty double bolt/lug only 15mm ones for $338+shipping. These are one of a kind.
I'm asking $400+shipping. You will get 4 1" (25mm) spacers, chrome locking lug nuts, and hubs with ARP studs already pressed in + 4 extra ARP studs. I'll even give you the knuckles if you want, but it will be heavier in shipping. These and the wheels can be packaged together for $650+shipping.
Wheels on and spacers:
Spacers with hub/rotor & ARP studs.
Precision 4431E Turbo rated for maximum 565HP. This turbo will support all your hp needs and more. There's only one minor point I'd like to disclose about the turbo, one of the turbine blades has a small chip off the corner which can be seen in the pics. I got the turbo like that, however it has not effected the performance of the turbo. A friend of mine (2.0 Subaru) has been running the turbo since October since it was just sitting in the shop and his was on back-order. He's run it for about 3300 miles zero issues at 20-23 psi 438whp~
480shipped. At this price, for an authentic precision turbo is a steal. Knock offs sell at $650. I'm only offering it for 7 days, first to PM me and ask for my paypal address gets it. Any quetions let me know
Specs:
Compressor Wheel Diameter 58mm
Compressor Wheel Inducer - 2.290
Compressor Wheel Exducer 2.950
Wheel Trim 60 Trim
Compressor Inlet 3.00"
Outlet Size 2.00"
Bearing System PTE Race 360 Center Section
Turbine Housing A/R Ratio - .63 5 Bolt Turbine Housing
Turbine Wheel Style - T3 (Stage III)
Turbine Wheel Inducer 2.559"
Turbine Wheel Exducer 2.228"
Turbine Wheel Trim - 76
If you feel a price isn't fair pm me and let me know why and how much it's "really" worth. Items include shipping unless stated otherwise. Dibs is 24hours only, then it's next in line. PAYPAL: itsamemario_ @ hotmail.com (remove spaces) Stock 2.0 240cc injectors with 3000 miles. Great for upgrading from 1.8 190cc. - 35shipped. Dealer charges 70$ for 1 injector.
Stock steering wheel with airbag. Dealer charge is 410$ for just the airbag - 40shipped
Reactive SS shift knob - 15shipped.
Automatic raising AM/FM antenna. Worked great and retracts when radio is turned off for a sleeker look and yet still receives great reception. $40 shipped.
RD1 Dash cruise/wiper/defogger module. $5 if thrown in with another item.
Stock fuel filter 100 miles on it, with stock lines. - 30 shipped
Stock Fuel pump - $30 shipped
Small profile oil catch can - $20shipped
16x7 114.3 x 4 Wheels made by mrr tr2's. These wheels have been run on the car for a total of 11 months. They are black with a polished lip. They are in overall good shape, no bends, cracks etc. One does have some curb rash not very noticeably unless your up close. One also has tiny scratches on the face of the rim from when I first had them shipped to me. I believe they put them face down on cement. I was going to repaint them, but I didn't bother. They looked fine for me.
They come wrapped with Estca Supra 712 tires. These tires are fantastic on dry and wet. They grip in corners real well and has a nice stiff sidewall to reduce body roll. Tire size is 215/45/16 and have good amount of tread on them. These wheels and tires never seen snow/salt.
The KUMHO ECSTA Supra 712 Directional tread was developed to meet the very highest demands of those drivers who require the absolute best in handling and traction. With its European design and styling, the ECSTA Supra delivers Ultra High Performance.
SPECIAL FEATURES
* Advanced Silica tread compounding for superior wet & dry traction and handling.
* Large lateral and center channels provide maximum water evacuation.
* Advanced directional tread design for superior acceleration, braking and cornering.
* Two durable nylon cap plies give high speed stability and resistance to centrifugal forces.
* Two wide steel belts provide excellent cornering power and stable footprint.
* Rim Protector in the lower sidewall safeguards wheel against scratches and abrasions.
Only $350+shipping. Please rock these for me this spring/summer as I don't have the space to store them.
4 custom made 1" hub centric wheel spacers. These are made out of 6061 aluminum and machined by yours truly. Reason I made them was because there were no quality hub centric wheel spacers on the market that didn't have the double bolt through fastening. I find those very unsafe. Instead of 4 lugnuts, you have 8 per wheel to worry about. Thats 32 in total, NO THANKS. These utilize the stock studs. How you might ask? I ordered longer ARP knurled studs 150,000psi breaking strength and machined them to the length I needed to cover 1" spacers. The hub was then machine to accept 1/2"-20 studs instead of our smaller 12mm. These are beefier and much stronger then stock studs and safe to use with spacers. They also provide extended knurle which the spacers press into for even extra safety. Took me 43 hours total to make these. I was also sick of hub rings so the outside of the spacer is machined for 67mm bore so you dont need to run hub centric rings.
You will gain a wider track by 2" with these which improves handling and also fills in fender/bumper gaps. Lets the wheel sit flush with the body lines. This is not some kind of backyard creation. These were professionally hand made at my machine shop, these are quality pieces. With the new project being 5 lug, I will not have use for these and will have to make new ones. I'm in no rush to sell these as they dont take up much space.
I looked on ebay, you still can't buy 1" hubcentric wheel spacers in 4x114.3. Kspec sells shitty double bolt/lug only 15mm ones for $338+shipping. These are one of a kind.
I'm asking $400+shipping. You will get 4 1" (25mm) spacers, chrome locking lug nuts, and hubs with ARP studs already pressed in + 4 extra ARP studs. I'll even give you the knuckles if you want, but it will be heavier in shipping. These and the wheels can be packaged together for $650+shipping.
Wheels on and spacers:
Spacers with hub/rotor & ARP studs.
Precision 4431E Turbo rated for maximum 565HP. This turbo will support all your hp needs and more. There's only one minor point I'd like to disclose about the turbo, one of the turbine blades has a small chip off the corner which can be seen in the pics. I got the turbo like that, however it has not effected the performance of the turbo. A friend of mine (2.0 Subaru) has been running the turbo since October since it was just sitting in the shop and his was on back-order. He's run it for about 3300 miles zero issues at 20-23 psi 438whp~
480shipped. At this price, for an authentic precision turbo is a steal. Knock offs sell at $650. I'm only offering it for 7 days, first to PM me and ask for my paypal address gets it. Any quetions let me know
Specs:
Compressor Wheel Diameter 58mm
Compressor Wheel Inducer - 2.290
Compressor Wheel Exducer 2.950
Wheel Trim 60 Trim
Compressor Inlet 3.00"
Outlet Size 2.00"
Bearing System PTE Race 360 Center Section
Turbine Housing A/R Ratio - .63 5 Bolt Turbine Housing
Turbine Wheel Style - T3 (Stage III)
Turbine Wheel Inducer 2.559"
Turbine Wheel Exducer 2.228"
Turbine Wheel Trim - 76
