FS: HUGE PERFORMANCE PARTS 600WHP CAPABLE
01-01-2012, 01:57 AM
#1
Senior Member
Thread Starter
Join Date: Mar 2006
Posts: 5,754
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Tiburon
FS: HUGE PERFORMANCE PARTS 600WHP CAPABLE
I've been battling this thought for weeks on end now and I have finally come to a decision (I'll probably regret it in the upcoming year). It's time to sell all my go fast parts and return the vehicle to relatively stock condition...not quite though. I want to take the vehicle in a new direction that I've never done before----rally cross but only on snow. I live in Canada and I've gone to a couple events, i've driven a couple times in an event and it's a blast. The class that I want to compete in and learn the ropes requires UNMODIFIED (only mod is a snorkel and struts/springs) cars. I'm probably going to regret it like I mentioned earlier, but if I don't do it now, I never will lol.
Intentions behind this build. Achieve 500whp like a sneeze—high 10sec street car, move on to 600whp—low 10 sec daily street car.
Last year I was able to finish it in October and got to drive it for about 1 month until I pulled the motor out to build the new top mount for the new set up. I only had it running up to 16 psi which was probably making around 350ish whp on the OLD smaller turbo set up I made 415whp~ at 27 psi (ON STOCK MOTOR UNTIL IT WENT POP---not good LOL). With the new turbo set up, I was shooting for around 600whp.
GENUINE TiAL 50MM BOV --SOLD
*1.8 INTAKE AND EXHAUST CAMS----$45
GENUINE MOMO STEERING WHEEL---$65
*Excellent condition
CUSTOM BILLET ALUMINUM STEERING WHEEL HUB---$65 **YOU CAN SEE IT IN THE ABOVE PIC**
*Won’t find another one of these on the market. Light weight 6061 aluminum, heavy duty and not flimsy.
*I wouldn’t sell the momo wheel and hub but I have to run stock interior.
CUSTOM RADIO SURROUND—$30 or $45 with 4 switches (3 LED indicators)&volt display in blue LED.
*The surround was not assembled in the dash, it’s pulled out in the pic since I was messing with the wiring for the radio.
*Holds 2 reg gauges angled towards driver
*4 switches
*slot for volt LED indicator
*in OKAY condition, some wear & tear; I would touch it up and re-paint it to match your interior.
A PILLAR 2 GAUGE POD--- $35
*will include stock A pillar that it’s mounted too if you’d like.
OIL TEMP GAUGE—$25 **CHECK PIC OF CONSOLE**
*Black face, tinted glass, white LED
WATER TEMP GAUGE---$25 **CHECK PIC OF CONSOLE**
*Black face, tinted glass, white LED
MEGAN RACING EGT GAUGE—$45 **CHECK PIC OF A PILLAR**
*Black face, white LED
AUTOMETER sportcomp II OIL PRESSURE GAUGE---$45 **CHECK PIC OF A PILLAR**
*Black face, white LED
AUTOMETER SPORTCOMP II VOLT GAUGE—$25
*black face, white LED
AUTOMETER SPORTCOMP EGT GAUGE—25
*black face, has some wear and tear
STAINLESS ADJUSTABLE END LINKS--SOLD
*These are great quality, pillow ball mounts, I just can’t remember the brand.
*These can be used front or rear from my understanding
EIBACH SWAY BARS--SOLD
*front and rear (pic is of front, rear is mounted)
*great condition
STAINLESS STEEL EXHAUST—SOLD
*2.5” straight through with a dual tip non ricer muffler
* Will come with a test pipe to replace the cat
STOCK CLUTCH MASTER—25
*Great condition
SS CLUTCH LINE---$SOLD
*Replaces the crap stock line---improves clutch response.
STOCK 2.0 BRAKE MASTER—25
*Great condition
FRONT STRUT BAR--$65
*I was never happy with any strut bar offered for us so I made my own. All other ones were weak with silly threaded rod weak points. This bishhh is BEEFY and RIGID. It will never bend. It was fantastic in keeping front end from twisting in road courses.
STOCK RACK & PINION--$45
*Great condition, a spare I had incase mine sh*t bricks at the track since junk yards want $140+ for them and oem is $600.
Intentions behind this build. Achieve 500whp like a sneeze—high 10sec street car, move on to 600whp—low 10 sec daily street car.
Last year I was able to finish it in October and got to drive it for about 1 month until I pulled the motor out to build the new top mount for the new set up. I only had it running up to 16 psi which was probably making around 350ish whp on the OLD smaller turbo set up I made 415whp~ at 27 psi (ON STOCK MOTOR UNTIL IT WENT POP---not good LOL). With the new turbo set up, I was shooting for around 600whp.
GENUINE TiAL 50MM BOV --SOLD
*1.8 INTAKE AND EXHAUST CAMS----$45
GENUINE MOMO STEERING WHEEL---$65
*Excellent condition
CUSTOM BILLET ALUMINUM STEERING WHEEL HUB---$65 **YOU CAN SEE IT IN THE ABOVE PIC**
*Won’t find another one of these on the market. Light weight 6061 aluminum, heavy duty and not flimsy.
*I wouldn’t sell the momo wheel and hub but I have to run stock interior.
CUSTOM RADIO SURROUND—$30 or $45 with 4 switches (3 LED indicators)&volt display in blue LED.
*The surround was not assembled in the dash, it’s pulled out in the pic since I was messing with the wiring for the radio.
*Holds 2 reg gauges angled towards driver
*4 switches
*slot for volt LED indicator
*in OKAY condition, some wear & tear; I would touch it up and re-paint it to match your interior.
A PILLAR 2 GAUGE POD--- $35
*will include stock A pillar that it’s mounted too if you’d like.
OIL TEMP GAUGE—$25 **CHECK PIC OF CONSOLE**
*Black face, tinted glass, white LED
WATER TEMP GAUGE---$25 **CHECK PIC OF CONSOLE**
*Black face, tinted glass, white LED
MEGAN RACING EGT GAUGE—$45 **CHECK PIC OF A PILLAR**
*Black face, white LED
AUTOMETER sportcomp II OIL PRESSURE GAUGE---$45 **CHECK PIC OF A PILLAR**
*Black face, white LED
AUTOMETER SPORTCOMP II VOLT GAUGE—$25
*black face, white LED
AUTOMETER SPORTCOMP EGT GAUGE—25
*black face, has some wear and tear
STAINLESS ADJUSTABLE END LINKS--SOLD
*These are great quality, pillow ball mounts, I just can’t remember the brand.
*These can be used front or rear from my understanding
EIBACH SWAY BARS--SOLD
*front and rear (pic is of front, rear is mounted)
*great condition
STAINLESS STEEL EXHAUST—SOLD
*2.5” straight through with a dual tip non ricer muffler
* Will come with a test pipe to replace the cat
STOCK CLUTCH MASTER—25
*Great condition
SS CLUTCH LINE---$SOLD
*Replaces the crap stock line---improves clutch response.
STOCK 2.0 BRAKE MASTER—25
*Great condition
FRONT STRUT BAR--$65
*I was never happy with any strut bar offered for us so I made my own. All other ones were weak with silly threaded rod weak points. This bishhh is BEEFY and RIGID. It will never bend. It was fantastic in keeping front end from twisting in road courses.
STOCK RACK & PINION--$45
*Great condition, a spare I had incase mine sh*t bricks at the track since junk yards want $140+ for them and oem is $600.
01-01-2012, 02:00 AM
#2
Senior Member
Thread Starter
Join Date: Mar 2006
Posts: 5,754
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Tiburon
WILWOOD BIG BRAKE UPGRADE--$300
*4 piston Aluminum brake calipers for the front, no leaks, have some exterior wear and tear.
*2 WILWOOD DRILLED ROTORS 11.75"
*I was going to complete the kit but now I can’t use it for this project, all you’ll need is the rotor hats (about $100ea.), brake pads (about $80) and caliper mounting brackets (about $150)
HALF CORE RAD WITH FAN & hoses--SOLD
ACT HD 6 PUCK CLUTCH KIT + XTD LIGHTWEIGHT CHROME-MOLY 9lb FLYWHEEL---$300
*Heavy duty never slipped under 420~HP
*Best clutch kit I ever ran, highly spoken of and holds tons of power if you know how to drive manual
*Has about 3000miles on it, almost brand new.
VALVECOVER with RARE CORE MOTORSPORTS OIL CAP & FITTINGS FOR CATCH CAN--SOLD
CUSTOM INTAKE MANIFOLD WITH 70MM BBTB--$SOLD
BILLET OIL FILTER ADAPTER---SOLD
4 BRAND NEW FORD RACING 440CC injectors -- SOLD
MANUAL BOOST CONTROLER--$25
GENUINE WALBRO 255 --SOLD
AEROMOTIVE A-1000 RRFPR with BLACK PRESSURE GUAGE---SOLD
MISC OEM STUFF—SHIFTER BASE/STEERING COLOMN/ MASTER WITH PUMP/STARTER/ COIL PACK/etc---YOU PRICE IT.
*rotors and calipers not for sale.
CUSTOM GKII FRONT BUMPER--$250
*Not fiberglass, TPO plastic.
*Made out of half an RD1 bumper + half a GKII bumper.
*Riveted together, and bonded with TPO plastic
*if you look real close you can see the outline of the little rivets. I was happy with it but you can perfect it if you wish
*Fits like a glove because its OEM
*Please note it’s not in perfect condition, has a couple scratches, has a couple light seam cracks.
SUPER RARE SIDE SKIRTS---$250
*So rare that I don’t even remember who manufactured them.
*In fantastic condition
20” MRR HR4 CONCAVE STAGGERED RIMS+ HANKOOK V12 EVO TIRES ---$2000
*Only been used for 4 months—Practically brand new, rims cost me $1400 and tires$1100.
*Fantastic condition
*Fronts are 20x8” 35 ET 245/40/20 Tires
*Rear are 20x9” 35 ET 275/35/20 Tires
**Prices do NOT include shipping. I live in Canada but cross to the US often so I can ship items cheaper for the US guys from within US.
**Please note, if you buy multiple items, I can see about giving you a better deal especially when combining shipping
**If you are going to PM me an offer, please be reasonable. I don’t buy junk parts, and find these prices very reasonable.
**DIBS are held only for 24hours.
**If someone wants a DP made or Wastegate dumps made for the manifold/turbo, extra cost will be $160 for DP and $120 for wastegate dumps.
*4 piston Aluminum brake calipers for the front, no leaks, have some exterior wear and tear.
*2 WILWOOD DRILLED ROTORS 11.75"
*I was going to complete the kit but now I can’t use it for this project, all you’ll need is the rotor hats (about $100ea.), brake pads (about $80) and caliper mounting brackets (about $150)
HALF CORE RAD WITH FAN & hoses--SOLD
ACT HD 6 PUCK CLUTCH KIT + XTD LIGHTWEIGHT CHROME-MOLY 9lb FLYWHEEL---$300
*Heavy duty never slipped under 420~HP
*Best clutch kit I ever ran, highly spoken of and holds tons of power if you know how to drive manual
*Has about 3000miles on it, almost brand new.
VALVECOVER with RARE CORE MOTORSPORTS OIL CAP & FITTINGS FOR CATCH CAN--SOLD
CUSTOM INTAKE MANIFOLD WITH 70MM BBTB--$SOLD
BILLET OIL FILTER ADAPTER---SOLD
4 BRAND NEW FORD RACING 440CC injectors -- SOLD
MANUAL BOOST CONTROLER--$25
GENUINE WALBRO 255 --SOLD
AEROMOTIVE A-1000 RRFPR with BLACK PRESSURE GUAGE---SOLD
MISC OEM STUFF—SHIFTER BASE/STEERING COLOMN/ MASTER WITH PUMP/STARTER/ COIL PACK/etc---YOU PRICE IT.
*rotors and calipers not for sale.
CUSTOM GKII FRONT BUMPER--$250
*Not fiberglass, TPO plastic.
*Made out of half an RD1 bumper + half a GKII bumper.
*Riveted together, and bonded with TPO plastic
*if you look real close you can see the outline of the little rivets. I was happy with it but you can perfect it if you wish
*Fits like a glove because its OEM
*Please note it’s not in perfect condition, has a couple scratches, has a couple light seam cracks.
SUPER RARE SIDE SKIRTS---$250
*So rare that I don’t even remember who manufactured them.
*In fantastic condition
20” MRR HR4 CONCAVE STAGGERED RIMS+ HANKOOK V12 EVO TIRES ---$2000
*Only been used for 4 months—Practically brand new, rims cost me $1400 and tires$1100.
*Fantastic condition
*Fronts are 20x8” 35 ET 245/40/20 Tires
*Rear are 20x9” 35 ET 275/35/20 Tires
**Prices do NOT include shipping. I live in Canada but cross to the US often so I can ship items cheaper for the US guys from within US.
**Please note, if you buy multiple items, I can see about giving you a better deal especially when combining shipping
**If you are going to PM me an offer, please be reasonable. I don’t buy junk parts, and find these prices very reasonable.
**DIBS are held only for 24hours.
**If someone wants a DP made or Wastegate dumps made for the manifold/turbo, extra cost will be $160 for DP and $120 for wastegate dumps.
01-01-2012, 12:01 PM
#5
Senior Member
Join Date: Feb 2011
Location: elgin il
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 99 Beta accent
i am putting together a block im gonna need alot od misc stuff like that coil pack, beta 1 sensors and timing belt covers anything like that... if you have some suff lmk asap thanks
01-01-2012, 12:04 PM
#6
Administrator
Join Date: Oct 2002
Location: ɯooɹpǝq ɹnoʎ
Posts: 13,943
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: ǝdnoɔ sısǝuǝƃ
Wow, tanc... I can't believe I'm reading this thread. It makes me cry. 
I hope you're able to resume this project and build that beast.
I hope you're able to resume this project and build that beast.
