SOCKS_old

condition is used.

i was going to put it in the SRT, but i went with one of the HD style setups i sell.

could use a good 800, 1000, 1500 grit sanding to restore the nice finish.

i have removed the site tube and put in plugs, since it was all nasty from the previous owner having used it.

can is made from aluminum and can be completely taken apart with a hex wrench. very heavy duty can. if cleaned up and mounted in a nice location, will look real good in the engine bay.

there are two screws on the back so you can mount a bracket to the can.

for an extra 20$, i will tap the top, install a fitting and a breather filter so you could actually use this can as a breather can. you could run both your PCV and your breather to the one can that way also. or you i could plug one of the ports and it could be used for just a breather, but you would have the can to catch the mess.

20$ shipped for just the can. paypal only. USA only.

DTN

is this a current picture, if so, sold!

SOCKS_old

that picture was taken 10 min before i posted it.

knowing how much you like shit perdy, ill even clean it up for you before i ship it!

DTN

sending paypal now

sent paypal. no breather.

SOCKS_old

thanks!! got the money. will ship out monday, ups and ill get you your tracking monday afternoon sometime.

DTN

Whoohoo.


but seriously


Can't wait to get it.

mcorrales

Nice looking part... good luck with the installation!

SOCKS_old

item has been sent and received. can be closed.. fing02.gif

DTN

I made a bracket and installed it today. I was able to install it using the stock airbox bracket which I'm not using because I'm running a CAI.











Thanks SOCKS. It was a good buy. I appreciate it.

mwood

looks like you have it hooked up wrong....you got this on the Breather and then back to Y pipe for intake before TB...

your suppose to have it on the PVC then to Can then to IM...

cuz right now your still getting blow by