Fs: Battery Relocation Kit, Audio Equipment
Thread Starter
Senior Member
Joined: Dec 2002
Posts: 1,064
Likes: 0
As stated in the description, I have a zero gauge battery relocation kit up for grabs<span style="color:yellow"><span style="font-size:36pt;line-height:100%">*SOLD*</span></span>. It was only on for a couple of weeks before the Tib was totaled.
Kit consists of:
Anti-Corrosion Coated ends with soldered closed end connects.
+ wire that runs from front to back rear of car (underneath)
- 3 foot ground
battery box
battery tray
batter tie down
Any interest make me an offer, this is basically custom made for a Tib and I used only the BEST wire and parts I could find and had the connectors professionally fitted.
I also have some belts, a fuel filter, header gasket, header to exhaust gasket and the carpeted hatch flooring minus the tire cover. If you have any desire to pick any of that up either let me know....all parts are new except the hatch flooring but it looks new.
I still have the origional boxes for them including the stickers.
I paid $1400 for these origionally not including the amp link.
They are the Punch 200.2 and the Punch 55.2.
The Punch 200.2 is rated at 400 Watts at 4 ohms and is stable at 2 ohms.
The Punch 55.2 is rated at 110 Watts at 4 ohms and is stable at 2 ohms also.
The 55.2 was rated at 259 Watts at 2 ohms...I don't appear to still have the paper printed out on the 200.2.
The Punch Link is RCF-2210.
Since they were so much when I bought them I am not sure what to ask for them now.*edit*<span style="font-size:36pt;line-height:100%"><span style="color:Yellow">*SOLD*</span></span>
Both of the amps are MEHSA, Mosfet, have a NOMAD protection circuit and a built in XCARD electronic crossover.
Pics are available upon request.*edit* here are the pics (and I added some pics of some JBL Pro Touring 5 1/4" speakers that I have up now too...
....and the box below, the JL's are already gone.
<span style="color:red"><span style="font-size:36pt;line-height:100%">See below for pics of the rest of the kit, the belts and gqskets...</span></span>
Kit consists of:
Anti-Corrosion Coated ends with soldered closed end connects.
+ wire that runs from front to back rear of car (underneath)
- 3 foot ground
battery box
battery tray
batter tie down
Any interest make me an offer, this is basically custom made for a Tib and I used only the BEST wire and parts I could find and had the connectors professionally fitted.
I also have some belts, a fuel filter, header gasket, header to exhaust gasket and the carpeted hatch flooring minus the tire cover. If you have any desire to pick any of that up either let me know....all parts are new except the hatch flooring but it looks new.
I still have the origional boxes for them including the stickers.
I paid $1400 for these origionally not including the amp link.
They are the Punch 200.2 and the Punch 55.2.
The Punch 200.2 is rated at 400 Watts at 4 ohms and is stable at 2 ohms.
The Punch 55.2 is rated at 110 Watts at 4 ohms and is stable at 2 ohms also.
The 55.2 was rated at 259 Watts at 2 ohms...I don't appear to still have the paper printed out on the 200.2.
The Punch Link is RCF-2210.
Since they were so much when I bought them I am not sure what to ask for them now.*edit*<span style="font-size:36pt;line-height:100%"><span style="color:Yellow">*SOLD*</span></span>
Both of the amps are MEHSA, Mosfet, have a NOMAD protection circuit and a built in XCARD electronic crossover.
Pics are available upon request.*edit* here are the pics (and I added some pics of some JBL Pro Touring 5 1/4" speakers that I have up now too...
....and the box below, the JL's are already gone.
<span style="color:red"><span style="font-size:36pt;line-height:100%">See below for pics of the rest of the kit, the belts and gqskets...</span></span>
Thread Starter
Senior Member
Joined: Dec 2002
Posts: 1,064
Likes: 0
<div class='quotetop'>QUOTE (REDZMAN @ May 21 2005, 12:09 PM)</div><div class='quotemain'>New fuel filter?
<div align='right'><{POST_SNAPBACK}></div></div>
Yes a new fuel filter.
Yes it is a relocation to the rear of the car.
Yes I can get pics.
I paid about $80 for everything said and done including having then terminals coated and soldered on. I was going to ask for around $50 + shipping on this.
The kit I pieced together is basically this but better components and Mr. Gasket wants $82 for theirs:
I will takes pics of all of that stuff when I get home.
<div align='right'><{POST_SNAPBACK}></div></div>
Yes a new fuel filter.
Yes it is a relocation to the rear of the car.
Yes I can get pics.
I paid about $80 for everything said and done including having then terminals coated and soldered on. I was going to ask for around $50 + shipping on this.
The kit I pieced together is basically this but better components and Mr. Gasket wants $82 for theirs:
I will takes pics of all of that stuff when I get home.
Member
Joined: Apr 2005
Posts: 98
Likes: 0
From: Loveland,Co
Hey how much do you want for all the gaskets and the belts. Let me know ASAP and for the filter to. Also are you going to see anything on the inside like interior and what yr is this for. I have a 99 and I belive that the 1st gen engine is the same as the 2nd gen if so I would be interested for the gaskets and belts.
