FS:96-98 Elantra, Tiburon Performance Engine Kit
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 03 Hyundai Accent
I got the engine kit for a project I was going to start but ran out of $$$. I got the kit from importperformanceparts.net and paid $949 I'm asking $600 + shipping obo for it.
Kit Includes
Complete Gasket Set
Performance Copper Head Gasket
ROSS/Wiseco Forged Performance Pistons
(82.5 Bore) and (8.5-1 comp ratio)
Performance Rings
Performance Wrist Pins
TOGA HP Main Bearings
TOGA HP Rod Bearings
Thrust Washers
Timing Belt
Expansion Plugs
Kit Includes
Complete Gasket Set
Performance Copper Head Gasket
ROSS/Wiseco Forged Performance Pistons
(82.5 Bore) and (8.5-1 comp ratio)
Performance Rings
Performance Wrist Pins
TOGA HP Main Bearings
TOGA HP Rod Bearings
Thrust Washers
Timing Belt
Expansion Plugs
#2
Senior Member
Join Date: May 2006
Posts: 1,494
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998/Hyundai/Tiburon FX
Well, I am pretty sure that is the engine kit for the 1.8L motor which means the timing belt is a different length and other various parts may be different. But I am pretty sure that the pistons will work in a 2.0L engine. If they will, then I would take just the pistons/rings from you for say... 300 shipped? Can someone confirm that the pistons from the 1.8 and 2.0 are the same?
Thanks. smile.gif
Thanks. smile.gif
#4
Senior Member
Join Date: Jul 2001
Location: Winnipeg
Posts: 4,828
Likes: 0
Received 0 Likes
on
0 Posts
<div class='quotetop'>QUOTE (tdonnell @ May 30 2006, 01:30 PM) <{POST_SNAPBACK}></div><div class='quotemain'>Can someone confirm that the pistons from the 1.8 and 2.0 are the same?
Thanks. smile.gif</div>
According to my parts fisch, they are different.
Thanks. smile.gif</div>
According to my parts fisch, they are different.
#7
Senior Member
Join Date: May 2006
Posts: 1,494
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998/Hyundai/Tiburon FX
I have been looking around and seem to be leaning toward the fact that the pistons ARE different between the 1.8 and 2.0L engines.
In Jon gtr's engine buildup thread there is a pic of the part number for the wiseco pistons and the sticker specifically says hyundai 2.0L.
So I think they are different, but not sure.
Anyone who knows please post.
Thanks.
In Jon gtr's engine buildup thread there is a pic of the part number for the wiseco pistons and the sticker specifically says hyundai 2.0L.
So I think they are different, but not sure.
Anyone who knows please post.
Thanks.
#8
Junior Member
Thread Starter
Join Date: Mar 2006
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 03 Hyundai Accent
The pistons in JonGTR engine bulit are 83mm bore. These pistons are 82.5mm bore. You should ask Jon if he bored out his block to fit the pistons.
I found that the beta with engine code G4GF has a stock bore of 82mm.
I found that the beta with engine code G4GF has a stock bore of 82mm.