For Sale Sell all your stuff here or use the Classifieds Section!

Fs: 70mm Tb,cf Hoods,side Skirts,wings,camshaft,axleback

Old 12-08-2006 | 07:38 PM
  #21  
SOCKS_old's Avatar
Banned
 
Joined: Jun 2006
Posts: 1
Likes: 0
Default

i know what they sell for.. but i already have a 62mm, i just want bigger.. i dont wanna make an offer cuz itll be lowballing, but let me know if you dont sell it, cuz im sure mine would get scooped up fast on here.
Old 12-08-2006 | 09:57 PM
  #22  
b18sihatch's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 28
Likes: 0
Default

i cant even find a KOR tech throttle body this large! biggest i have seen them say they sell is 59-62mm havent been able to find anything larger. so maybe this is a rare throttle body?

it works with or without cruise control. it has twin throttle body pullies.

very nice unit!

well throw out a offer. and we can go from there. i find this throttle body really interesting as i see that they have interchangeable rings that can make them larger but cant find anything about the extremely larger throttles like this one, so i dont know if you can purchase larger ones or what. wish i could find out

i've also got a set of 440cc injectors that are pretty much brand new, they have been flow tested & cleaned that was 104.00 asking 150 for the injectors

also have a msd sci-L sport compact ignition with a 8k rev rpm pill, 150.00 mint condition!
Old 12-09-2006 | 09:37 AM
  #23  
REDZMAN's Avatar
Senior Member
 
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Default

You might wanna take a new pic of the TB SHOWING the measurement on it. The reason is, Rside DID make a 70MM BBTB, but it wasn't adjustable.

Only the 60ish MM one was adjustable.

Rside went out of business about 2 years ago, we sell their products on Kspec.com
Old 12-09-2006 | 10:56 AM
  #24  
b18sihatch's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 28
Likes: 0
Default

Here is the measurments of the throttle body. how much di the 70mm throttle body go for? i know the 62mm go for like 300-400.00 i imagine the 70 was probably more ?

do you tihnk im asking to much for it?



it does have the bolts in the bakc where you can take the front ring off tho, not sure if the 70mm were a solid piece or they all that those bolts to remove the front
Old 12-09-2006 | 04:22 PM
  #25  
REDZMAN's Avatar
Senior Member
 
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Default

Ehh, I don't remember the pricing on them, is it no longer listed on Kspec?

I'd say 350 to 400 is fair for that item. Maybe High Fair, but fair none the less.
Old 12-09-2006 | 05:20 PM
  #26  
01tibby's Avatar
Senior Member
 
Joined: Mar 2006
Posts: 9,172
Likes: 0
Vehicle: 2001/Hyundai/Tiburon
Default

that doesnt look even close to 70mm.

bottom of the tape is bowed in and centimeter marks are on the long hash lines. looks 65mm-ish.
Old 12-09-2006 | 07:57 PM
  #27  
b18sihatch's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 28
Likes: 0
Default

its definitly 70mm its hard to take a pic and hold the camera and tape measurer but i asure you its 70mm
Old 12-09-2006 | 08:22 PM
  #28  
Caj Darkmoon's Avatar
Senior Member
 
Joined: Mar 2008
Posts: 1,759
Likes: 0
From: Grand Rapids, MI
Vehicle: 2001 Hyundai Tiburon
Default

Actually I think he is right. You're reading your tape wrong, if you look at the first 10mm you'll see that the number is NOT for the line it's next to, it's for the next full line.
Old 12-09-2006 | 08:31 PM
  #29  
tdonnell's Avatar
Senior Member
 
Joined: May 2006
Posts: 1,494
Likes: 0
Vehicle: 1998/Hyundai/Tiburon FX
Default

Actually, he is measuring it on the tapered side (inlet) of the TB, not the straight cut side that bolts to the IM, so the measurement he is getting is larger than that of the actual size of the throttle plate guys. I bet it is the adjustable 61mm. Measure it on the other side man.

Are you sure one of those hoods isn't for an rd1?? Id be interested if it was.
Old 12-09-2006 | 08:39 PM
  #30  
b18sihatch's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 28
Likes: 0
Default

the back side measures 66mm

the other side measures between 68-69 to be exact, you guys are right my measuring was off but my gf helped lol, so that is correct on that now.

i am not even sure what the hoods are for i was told they were for 2nd gen, but im not sure if they are or not


All times are GMT -6. The time now is 05:47 PM.