FS: 2.0L BETA and 1.5L SOHC X3 Parts
#1
Senior Member
Thread Starter
Join Date: Oct 2010
Location: ha.org
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: x3
FS: 2.0L BETA and 1.5L SOHC X3 Parts
Name: Jason C
Location: Eastern MA
Prices are based on local junkyard prices. Willing to split shipping costs. PayPal preferred. PM works best.
2.0L BETA1 parts (these parts had approx 66k miles):
-Valve Cover and Spark Plug Cover - $35
-Oil Pan (doesn't include drain bolt) may have some light dents - $30
-Stock injectors - $30
-Stock Flexplate for auto tranny - $25
-Tiburon Passengers side motor mount - $20
1.5L SOHC X3 parts:
-Intake Manifold (upper and lower) - $30
-Stock Throttle Body - $25
-Stock MAF - $25
-Stock airbox (minus temp sensor) and front intake tube - $ 35
-Tib Throttle Body modified to fit X3 manifold - $35
-Exhaust Manifold (top, not including cat converter/lower) - $35
-Valve Cover - $25
-Oil Pan - $30
-Coil Pack - $25
-Thermostat, housing, and hard water pipe - $30
-99 X3 2dr rear springs - $25
-Just about anything from a stock 1.5L SOHC motor, sensors, head, cams, etc. Motor had 101k miles, still ran stong when pulled.
Aftermarket parts:
-B&M Oil cooler (believe size is 5x12x2, will check) can use 1/2" barbs - $25
-DynoTune Two Stage RPM Switch (for nitrous or water/meth, on at one RPM, off at second RPM) - $75
Will post pics later or upon request.
Location: Eastern MA
Prices are based on local junkyard prices. Willing to split shipping costs. PayPal preferred. PM works best.
2.0L BETA1 parts (these parts had approx 66k miles):
-Valve Cover and Spark Plug Cover - $35
-Oil Pan (doesn't include drain bolt) may have some light dents - $30
-Stock injectors - $30
-Stock Flexplate for auto tranny - $25
-Tiburon Passengers side motor mount - $20
1.5L SOHC X3 parts:
-Intake Manifold (upper and lower) - $30
-Stock Throttle Body - $25
-Stock MAF - $25
-Stock airbox (minus temp sensor) and front intake tube - $ 35
-Tib Throttle Body modified to fit X3 manifold - $35
-Exhaust Manifold (top, not including cat converter/lower) - $35
-Valve Cover - $25
-Oil Pan - $30
-Coil Pack - $25
-Thermostat, housing, and hard water pipe - $30
-99 X3 2dr rear springs - $25
-Just about anything from a stock 1.5L SOHC motor, sensors, head, cams, etc. Motor had 101k miles, still ran stong when pulled.
Aftermarket parts:
-B&M Oil cooler (believe size is 5x12x2, will check) can use 1/2" barbs - $25
-DynoTune Two Stage RPM Switch (for nitrous or water/meth, on at one RPM, off at second RPM) - $75
Will post pics later or upon request.