Fs: 1999 Turbo Tib
09-10-2006, 11:22 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
serious buyers only please $6000 Firm
selling the the tib it has sat for to long (2years)
it has 72000 miles on the car about 15000 on current motor
runs great smooth @20psi about 285whp cant find dyno sheet for that run
but do duno sheet for 12 psi run wich was 241whp again motor runs strong and smooth
only problem with car is clear coat on roof and wing is coming off needs some paint work
has new tires
built as a daily driver with standard maintence did not require continuis repairs
only monthly oil changes can send video of its driveablity
motor has
t3/t4
msd dis-2
msd coils
smt-6
lm-1 wideband with spare 02 sensors
front mount intercooler
areomotive fuel pressure reg
secondary injectors are 550cc
turbo manifold is very high quality no cracks real thick ss tubing
flex alite fans
6 quart oil pan
8-1 comp pistons
1.8 liter cam
six puck clutch
2 1/2" down pipe
and more
only two of the jbls go with the car im keeping vega and one jbl
heres some of the parts when new
selling the the tib it has sat for to long (2years)
it has 72000 miles on the car about 15000 on current motor
runs great smooth @20psi about 285whp cant find dyno sheet for that run
but do duno sheet for 12 psi run wich was 241whp again motor runs strong and smooth
only problem with car is clear coat on roof and wing is coming off needs some paint work
has new tires
built as a daily driver with standard maintence did not require continuis repairs
only monthly oil changes can send video of its driveablity
motor has
t3/t4
msd dis-2
msd coils
smt-6
lm-1 wideband with spare 02 sensors
front mount intercooler
areomotive fuel pressure reg
secondary injectors are 550cc
turbo manifold is very high quality no cracks real thick ss tubing
flex alite fans
6 quart oil pan
8-1 comp pistons
1.8 liter cam
six puck clutch
2 1/2" down pipe
and more
only two of the jbls go with the car im keeping vega and one jbl
heres some of the parts when new
09-10-2006, 11:44 PM
#4
Senior Member
Join Date: Mar 2006
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997/ Hyundai/ Tiburon
dam dude you shoulda of came to our Norcal Hyundai Meets, i would love to see your car. Dam this car is soo tempting.
I would hella want to buy this car, but i would not know half of what to do if something would to go wrong.
I would hella want to buy this car, but i would not know half of what to do if something would to go wrong.
09-11-2006, 10:41 PM
#8
Senior Member
Join Date: May 2007
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998 Tiburon
Wow that's a really nice tib, with some TLC that would clean up to be a really nice car, and sounds friggin fast too lmao.gif
Seats look the same as mine, I can vouch for them.. they feel a little cheap but do the job very very well.
Just for information that clear problem really isnt a problem at all, all it needs is a wetsand with very fine paper being careful not to go through the color underneath and then a reclear, I dont even think you would need to do any blue at all, just a quart of clear with some reducer and hardener would probably be enough.
Like the color scheme too, very fitting smile.gif
Seats look the same as mine, I can vouch for them.. they feel a little cheap but do the job very very well.
Just for information that clear problem really isnt a problem at all, all it needs is a wetsand with very fine paper being careful not to go through the color underneath and then a reclear, I dont even think you would need to do any blue at all, just a quart of clear with some reducer and hardener would probably be enough.
Like the color scheme too, very fitting smile.gif
09-11-2006, 10:59 PM
#9
Junior Member
Thread Starter
Join Date: Feb 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
the exhaust enters the wastegate through the side and exits the bottom
via a very large intake or exhaust valve works extremely well was able to boost as low as 4 psi with 2.5" pipe
via a very large intake or exhaust valve works extremely well was able to boost as low as 4 psi with 2.5" pipe
