Fidanza Flywheel
Thread Starter
Junior Member
Joined: Aug 2004
Posts: 5
Likes: 0
From: Ottawa, ON Canada
<span style="font-size:14pt;line-height:100%">Posting for a Friend</span>
Fits- Tiburon 99-03 2.7L and weighs 9.5 lbs.
Please note: If you have a 2003 you need to refer to Fidanza's tech article to make sure this is the right part number for you. This is a 193361, there is two different versions for the 2003 because Hyundai changed ring gear heights on this year and the only way to tell is to measure your stock flywheel.
$325 shipped OBO
Contact: kmr26@uakron.edu
Or PM me and I'll pass it on to her.
Fits- Tiburon 99-03 2.7L and weighs 9.5 lbs.
Please note: If you have a 2003 you need to refer to Fidanza's tech article to make sure this is the right part number for you. This is a 193361, there is two different versions for the 2003 because Hyundai changed ring gear heights on this year and the only way to tell is to measure your stock flywheel.
$325 shipped OBO
Contact: kmr26@uakron.edu
Or PM me and I'll pass it on to her.
Thread Starter
Junior Member
Joined: Aug 2004
Posts: 5
Likes: 0
From: Ottawa, ON Canada
<div class='quotetop'>QUOTE </div><div class='quotemain'>Must be a tib from 99-01 (2.5l) to 5 Speed 3/03 / 6 Speed to 01-03 (2.7l) (THESE ARE THE DATES THE TIB WAS ACTUALLY MADE) Make sure you check that out. I got it at Summit Racing, took it out of the box to admire, and come to find out that I can't use it.</div>
Senior Member
Joined: Feb 2006
Posts: 414
Likes: 0
From: Illinois
I yea... Im pretty sure that if its for an RD its going to have the 35mm crank hole, Which I proved that you can make either or work on our cars with either the spacer from hyundai or fidanza, or taking the 35mm one to a machine shop and have it machined to 41mm (and some change)