F/S: Set of 4 Delphi Racetronix Injectors & Denso "Supra Turbo" Fuel Pump
12-16-2011, 08:21 AM
#1
Moderator
Thread Starter
Join Date: Mar 2006
Location: Arizona
Posts: 6,976
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: N/A as in Not Applicable, not Naturally Aspirated
F/S: Set of 4 Delphi Racetronix Injectors & Denso "Supra Turbo" Fuel Pump
SOLD!!! Denso 195130-1020 fuel pump, "Supra Turbo Pump" - $100 shipped
-alternative to walbro 255lph
SOLD!!!Delphi Multec 1 Flow-Matched Set of Four 50 lbs/hr Injector - $100 shipped[/s]
-$49.00ea from Racetronix
Both are brand new, [b][color="red]NEW PRICE:[/color] [s]$200.00[/s] $150.00 shipped[/b] (within USA) for all four injectors and the pump!
Part Number 17113738 (OE # 17104487)
Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.
Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:
• The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
• Compatible with alternative fuels (i.e. E85, Methanol)
• Longer service life
• High-speed disc action allows wider dynamic flow range for improved idling
• Quieter operation
• Revolutionary disc design resists build up deposits which can affect fuel flow.
• No Fuel leakage for quicker starts
Item Code: 17113738
Weight: 91.00GM
Brands: Delphi
Manufacturers : Delphi Injectors
Stock: Yes
Model: 17113738
Categories: Fuel Injectors - High Impedance
Retail P/N: 17113738
Manufacturer P/N: 17113738
Static Flow lb/hr (n-Heptane): 50.0
Static Flow cc/min: 525
Dynamic Flow (mg/pulse): 1.1
Dynamic Flow Tolerance +/-%: 5%
Coil Resistance Ohms: 12
Spray Pattern: 22.4 degrees - single spray cone
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
Weight (non-shipping): .20 lbs
Also have [url="https://www.hyundaiaftermarket.org/forum/topic/64268-misc-hyundai-leftovers/page__p__637337__fromsearch__1#entry637337"]OEM fuel rails and injectors here[/url] if you need spares/extras..
Thanks for looking.
-alternative to walbro 255lph
SOLD!!!
-$49.00ea from Racetronix
Both are brand new, [b][color="red]NEW PRICE:[/color] [s]$200.00[/s] $150.00 shipped[/b] (within USA) for all four injectors and the pump!
Part Number 17113738 (OE # 17104487)
Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.
Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:
• The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
• Compatible with alternative fuels (i.e. E85, Methanol)
• Longer service life
• High-speed disc action allows wider dynamic flow range for improved idling
• Quieter operation
• Revolutionary disc design resists build up deposits which can affect fuel flow.
• No Fuel leakage for quicker starts
Item Code: 17113738
Weight: 91.00GM
Brands: Delphi
Manufacturers : Delphi Injectors
Stock: Yes
Model: 17113738
Categories: Fuel Injectors - High Impedance
Retail P/N: 17113738
Manufacturer P/N: 17113738
Static Flow lb/hr (n-Heptane): 50.0
Static Flow cc/min: 525
Dynamic Flow (mg/pulse): 1.1
Dynamic Flow Tolerance +/-%: 5%
Coil Resistance Ohms: 12
Spray Pattern: 22.4 degrees - single spray cone
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
Weight (non-shipping): .20 lbs
Also have [url="https://www.hyundaiaftermarket.org/forum/topic/64268-misc-hyundai-leftovers/page__p__637337__fromsearch__1#entry637337"]OEM fuel rails and injectors here[/url] if you need spares/extras..
Thanks for looking.
01-24-2012, 10:24 AM
#3
Moderator
Thread Starter
Join Date: Mar 2006
Location: Arizona
Posts: 6,976
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: N/A as in Not Applicable, not Naturally Aspirated
Bump. Price drop. $100 shipped for the injectors, $100 shipped for the fuel pump. $150 shipped for both!
02-01-2012, 08:33 PM
#9
Moderator
Thread Starter
Join Date: Mar 2006
Location: Arizona
Posts: 6,976
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: N/A as in Not Applicable, not Naturally Aspirated
Close
Convert lb to grams
50lbs/hr x 453.59 g/lb = 22,679.5 g/hr
Convert g/hr to g/min by dividing by 60min/hour
22,679.5 g/hr x 1 hr/60 min = 377.99 g/min
To get cubic centimeters per min, use specific gravity of gasoline (which varies). Quick search shows 0.739 grams per cubic centimeter at 60°F
377.99 g/min x 1 cc/0.739 g = 511.49
Or about 512cc
Convert lb to grams
50lbs/hr x 453.59 g/lb = 22,679.5 g/hr
Convert g/hr to g/min by dividing by 60min/hour
22,679.5 g/hr x 1 hr/60 min = 377.99 g/min
To get cubic centimeters per min, use specific gravity of gasoline (which varies). Quick search shows 0.739 grams per cubic centimeter at 60°F
377.99 g/min x 1 cc/0.739 g = 511.49
Or about 512cc