Cleaning out the garage:

1. Two 1.8l Intake Camshafts. Both in excellent condition, one is currently on the RD but getting swapped out tonight. Looking for 55USD shipped each in the lower 48 states.

2. Shark Racing Cam Gear. In overall good condition, there are a few dings on the gear, but nothing noticeable until your up close. Looking for 53USD shipped in the lower 48 states.

3. BetaII Intake Manifold. I got this when I bought the short block for my J2, this is the MAP sensor version, clean, just need a new home. Perfect for a port/polish project. Looking for 60USD shipped in the lower 48 states.

4. BetaII Throttle Body. Nothing to special here. Great for a port/polish job. Looking for 25USD shipped in the lower 48 states.

5. BetaII Fuel Rail and 190cc Injectors. 30USD Shipped in the lower 48 states.

6. Two Keifco MAF's. Good condition pulled from the junkyard. 18USD shipped each in the lower 48 states.

7. Shark Racing Front Strut Bar: Old school version. Looking for 43USD shipped in the lower 48 states.

Pictures will be up later tonight. I did not bring my camera to work, where everything is.

Thanks,
Sean

 

what makes the strut bar the "old version"? and is it for an RD2? if so, i may be interested after pictures. this isnt really dibs though... just for the record, im just interested

 

Dibs on one of the intake cams. Will pay when I get back from work tonight.

 

dibs on beta 2 TB and 1.8L intake cam...just need your paypal addy and i will send the money

 

<div class='quotetop'>QUOTE (JBob250 @ Jun 1 2007, 02:47 PM) <{POST_SNAPBACK}></div><div class='quotemain'>what makes the strut bar the "old version"? and is it for an RD2? if so, i may be interested after pictures. this isnt really dibs though... just for the record, im just interested</div>

Basically, they are the same front sturt bar posted on Shark Racings website, the only difference between the two is one has a Shark Racing emlem on it, while the older version does not. I will post pictures, someone on EXD has expressed interest. I will keep this thread updated.

<div class='quotetop'>QUOTE (landshark16 @ Jun 1 2007, 02:53 PM) <{POST_SNAPBACK}></div><div class='quotemain'>Dibs on one of the intake cams. Will pay when I get back from work tonight.</div>

I will pm you my paypal address.

<div class='quotetop'>QUOTE (mwood @ Jun 1 2007, 03:14 PM) <{POST_SNAPBACK}></div><div class='quotemain'>dibs on beta 2 TB and 1.8L intake cam...just need your paypal addy and i will send the money</div>

I will pm you my paypal address.

Updated:

Cleaning out the garage:

1. Two 1.8l Intake Camshafts. Both in excellent condition, one is currently on the RD but getting swapped out tonight. Looking for 55USD shipped each in the lower 48 states. Pending Sale on both.

2. Shark Racing Cam Gear. In overall good condition, there are a few dings on the gear, but nothing noticeable until your up close. Looking for 53USD shipped in the lower 48 states.

3. BetaII Intake Manifold. I got this when I bought the short block for my J2, this is the MAP sensor version, clean, just need a new home. Perfect for a port/polish project. Looking for 60USD shipped in the lower 48 states.

4. BetaII Throttle Body. Nothing to special here. Great for a port/polish job. Looking for 25USD shipped in the lower 48 states. Pending Sale

5. BetaII Fuel Rail and 190cc Injectors. 30USD Shipped in the lower 48 states.

6. Two Keifco MAF's. Good condition pulled from the junkyard. 18USD shipped each in the lower 48 states.

7. Shark Racing Front Strut Bar: Old school version. Looking for 43USD shipped in the lower 48 states.
Pending Sale

 

im relqenishing my dibs on the beta 2 TB...just going to get the 1.8l cam

 

Sean I thought you were gonna let me have the cam gear, Send me a pm about it! smile.gif

 

dibs on a 1.8 cam if any are left

 

dibs on the strut bar
let me know if its available and I will pay you ASAP

 

Lemee know if you are willing to donate one of those MAF's, I have some research I am doing to try to do something new for us, but I need a spare MAF.