So I want to sell my engine and trans, complete pullout. Wire harness most likely too if you need it..

Beta 1 engine, beta 1 head. 2.0l block.
Engine runs
Has 1.8 cam, bored out stock throttle body w/ new butterfly to fit. (stock tb bored)
AEM cold air intake, clean dry flow filter
OBX 4-2-1 headers
1.8 ECU (best one)
New timing belt and tensioner
always used mobile synthetic
NGK Iridium plugs
New wires
Spark plug cover and timing cover are red
New Thermostat, gaskets, and water outlet
New valve cover gasket and spark plug grommets
All new belts
PS and AC are attatched, AC should work but hasn't been used in 3 years.. Took Belt off.





Engine and trans have 96k on them, running strong as ever. Always have babied my car.
But I can't part with the car, so be sure to keep an eye out, swap in mind =)

I don't really have a price in mind.. So Shoot me one you think is reasonable. Just remember, it has* quite a few mods on it, so don't low ball me.

Location, Southside chicago. I will shop at buyers expense, obviously pickup is easier for everyone.

 

Damn man, where have you been lol

 

If you are pulling the whole harness (All the way to the ecu) blacktibs (chris,flyryde) needs it. PM him.

 

Where have I been... Good question lol, but I think it's in order.

I have been here; I've been kicked out of my dads house, moved, been through a couple jobs, bought an 04 GTI and built that up, finally settling down into the new crib. Just got finished putting in a wood floor in my room, patched and repainted walls, ran coax, cat5, and speaker wire through the room. Now I'm working in the front room and building a breakfast bar.

So I have 2 immobile cars and the GTI, a new crib, work, school, and a girlfriend. Basically no time to think lmao.

But the tiburon is going to be getting a 6 bolt 4G63 FWD swap with a built engine. And It's going to be turned into a track car. Two racing seats, 4g63, full cage, stand alone, 15-20 psi. I figure no one will buy the car and it's not going anywhere, so we are going to build it into the poster child for me and my friends shop Highlander Autosports. That and the LS1 93 RX-7 =P

But yea, tibby is going to be a track b****.



As for the wire harness, I'd rather sell everything together, but depending on how this goes I might end up selling Engine/Trans seperate and then I'll figure out what I'm doing with the wiring.

 

^^^ I realize you would rather sell it all together, but I would be interested in buying the headers and most likely the cai if you decide you want to or the buyer doesn't need them

 

I have a spare set of OBX headers, and I have a spare AEM knockoff intake.

OBX, SSA, whatever theyre called now headers are goin for like 99$+ $42 shipping right now. The set is used, look to be in good shape, never installed on my vehicle. No Gasket included. I'll let them go for 50+ shipping.

Intake is BRAND NEW, never installed. Red in color. No filter. AEM style. I think I bought it for like 30+ shipping which was about 25. I'll give the intake to you for 20$ plus whatever shipping comes out to.

I also have a new 2.5" universal cat (30$ + ship), new Falken factory tuned strut bar (20$ +ship), used 1.8l ECU (best one 75$ plus ship), used good cond. Black housing euro lights ($50 +ship), used stock tb (25$ plus ship). I have other random parts like door panels, shift surround, radio surround, stock spoiler, and more.
I ship UPS so there's a useable tracking number and quick transfers.


PM me for any questions.
*I'll get pics tomorrow if I can

 

dibs on headers and intake pending pics and info. The headers, are they actually obx ones or are they knockoffs? I'm not really concerned about brand, more about the steel being thick enough. Why didn't you install them? Might take the euros too.

 

How many miles on the plugs & wires? I was about to order some. And are they NGK wires?

Might be interested in the ECU and the bored out TB too. Ill let you know soon.

 

Well the headers are used. Yes they are actual OBX brand, not the knock offs. I'll take a pic tonight. I didn't install them because i already have headers. I was going to buy my friends tiburon so i bought some headers before hand.

Let me know on the euros. They are in new condition, I had them installed for like a month. I siliconed around the lens too in case so water vapor doesn't get in.

 

What are the measurements on that cat? is it obd-II compliant? 1 O2 bung or dual?

I needed one for my auto tib but its going away with the stock mani... but I will need a cat when I go turbo.