items without pictures and a person's name next to them are already sold.

cupholder with broken clips on both sides. i epoxied them, but they arent holding real well. it was shitty epoxy....2 dollars.



brand new gauge faces. same ones used that will be in my DIY. check my post in the showroom forum for what they look like at night...10 dollars.


signal amplifier. bought it off of ebay for 15 dollars. the change is noticeable, but not super good...5 dollars.


ashtray. with a slightly cracked clip. also missing ashtray insert. epoxy it and it would work perfect...3 dollars. or 6 if you want me to make the little window and glowing ring around the lighter blue with leds. i will have pics of the blue ashtray assembly tomorrow in the showroom forum.



radio surround. with 2 holes and super glue damage from the ghey ass string lights the previous owner had on...7 dollars.




musical/flash controller for anything 12 volts. i got it some cpu modding neon tubes i bought. the problem with it is that the range for sound isnt good at all. the flash thing is pretty cool though. and i accidently cut off one of the clips to go into the same cpu tubes i bought, but if you are using this for regular neons, you wouldnt even need it...5 dollars.



A/C and Recirculation buttons. recirc button doesnt work. the internal switch is broken. A/C switch works, but is missing the little plastic peice that goes in the hole. the one from the recirc button should fit in there fine though. would be great to tinker with so you know what your doing if you are gonna mess with your stock ones....2 dollars for both combined.


radio surround perfect condition...10 dollars. switcheable between years, apart from actually fitting over the radio and you will need a new dash kit.<span style="color:red">SNOOP</span>
http://img43.photobucket.com/albums/v132/l...ni-P1010182.jpg

insert for fog lamp area switch. just blank panels, no switches. could easily stick existing switch in place of one panel if the other panes are damaged. 1 dollar. .<span style="color:red">SNOOP</span>
http://img43.photobucket.com/albums/v132/l...ni-P1010195.jpg

2nd gen heating assembly. perfect condition minus the knobs. 8 dollars. i can make it blue for 15(see the showroom forum). .<span style="color:red">SNOOP</span>
http://img43.photobucket.com/albums/v132/l...ni-P1010193.jpg
http://img43.photobucket.com/albums/v132/l...ni-P1010194.jpg

perfect condition 2nd gen dash. just the dash, no buttons...30 dollars. .<span style="color:red">SNOOP</span>
http://img43.photobucket.com/albums/v132/l...ni-P1010187.jpg

2nd gen clock. looks perfect, but havent tested it to see if it works. REDZ, its actually the one you sent me. does it work? 4 dollars. 1 if he says it doesnt work. lol .<span style="color:red">SNOOP</span>
http://img43.photobucket.com/albums/v132/l...ni-P1010196.jpg

2nd gen steering column panel. good condition, but has little holes at the very bottom(unnoticeable). 7 dollars. .<span style="color:red">SNOOP</span>
http://img43.photobucket.com/albums/v132/l...ni-P1010197.jpg
http://img43.photobucket.com/albums/v132/l...ni-P1010198.jpg
http://img43.photobucket.com/albums/v132/l...ni-P1010199.jpg

gauge ring things for 2nd gen. some of the little clips are missing... 1 dollar. .<span style="color:red">SNOOP</span>
http://img43.photobucket.com/albums/v132/l...ni-P1010219.jpg

and....
EVIL BUNNY!!!!!! AHHHHHHHHHHH!!!! (not really though)


also....

i can sell you some 5mm blue leds for 1.00 a peice. i have TONS they would come with a resistor allready soldered in and heat shrunkm, ready for 12V. i also have some wire taps so that you dont have to strip wires to get power or ground. 75 cents for each of those. the leds look like this pic except the gound lead has heatshrink around it too. the power lead has blue heat shrink around it. if you want to get the leds to disperse light at a wider angle, just sand or chip the top down flat. then whatever shipping is.

i can include 10ft. of blue 18ga wire for 2.50 dollars with it. i also have led holers. with these, you can drill a .25" hole anywhere and mount an led in it. these are 50 cents each.

when you connect the leds up, take the exposed part of the blue lead, bend it in half(or more, just make sure it doesnt stick out of the crimp terminal) and stick it in the connector for the power wire(refer to picture). then, crimp it down HARD to make sure you have a good connection. then just find a power wire and squeeze it into the little groove on the metal peice in the connector. you can do this with pliers, but a crimping tool would work best.

to ground it, put the black lead of the LED in the other type of connector in the one hole that has plastic at one end. then just slip your ground wire through the outside hole, and squeeze the metal down. then take the plastic thing and push it down untill it snaps into place.

and heres a picture of the stuff i have...



so pricing is....

1.00 per blue led
.75 per inline wire tap
2.50 per 10ft. of wire
.50 per led holder


I think thats all, but i will be sticking some more stuff up soon. just list what you want along with a zipcode, and i will get you a quote for the total. the smaller items i can ship close to the next day you pay. the bigger ones though will take longer, as i dont have boxes for them. with the bigger items, im gonna wait to accept money untill i actually have them packaged up. i can accept paypal(NO credit cards though) or usps money orders.

alot of the stuff that is slightly damaged would be great for paint jobs, because you can use filler primer and ssand down the rough edges smoot before you paint it.

please remember, i am a fulltime college student who commutes a total of two hours to school. classes are getting very tough now, so i have to devote most of my time to them. i will try to make sure i check in no more than 2 days at a time though.

email me at chrisweir01@yahoo.com if you have a question. or just pm me.

 

I'm not buying anything because I already have. Just wanted to say: He ships very quickly and promptly, very trustworthy. Would deal with again. A+ Seller
::::remembers he's not on EBay:::::
lol.gif

 

thanks dude.

and yeah redz, photobucket rules. if you didnt see the question i had for you in that huge post, i was wondering if you remember if the clock you sent me worked.

 

dude, i will buy the dash, the stereo surround, ash tray, cup holder, steering column part for 80 bucks shipped?????

if you have the center consol with shifter surround then i could use that to.

i know you want these guys to answer first but let me know..

 

WRC wants the ashtray (see note below), 8 of the leds ready to go w/ everything and heater control assembly done in red (i have some leds if you only have blue, pm me) and the clock (have a blue lens cover from blactibs) and the blank switch assembly. that should be about $40 right, plus shiping or shipping included??? Also how long would it take you do do the ashtray mod and get it back to me?? either to rockville or sterling (20850 + 20166 respectively), i'd like to send you mine.


Little john, i only need the actual ashtray insert, you can have the rest. I'm sure tibby will work something out for that.

 

it might wanna be noted that the gauge cluster you have is for a 1st gen, and if someone wants it for their 2nd gen, a little modding will have to be done...

am i wrong on that??

 

I wish I would have seen this earlier mang, I really wanted that Heater control assy BLUE for a LONG time now.

If Tibwrc doesn't get it, I want it.

The clock should work bra, I never hooked any of it up but the guy that I got it from said everything worked fine.

BTW, my wife wants the evil rabbit.

:twisted:

 

REDZ, I WILL GET IT, as long as snoop doesn't, but i will still have the one in my car now, once i get his and get it in, i'll send tibby mine for you.

Sound good??? (Tibby and REDZ)

Oh yeah and REDZ, did you send that stuff out to the OTHER chris yet???

 

i'm interested in the white face guagues...PM me or hit me up on AIM.

 

I'lll take these










so thats $10+$7+$1=$18 us where do you want me to send the paypal to I Have the money now Dibs .

Mail me when you are ready to sell genocyber66@comcast.net