I had plans on doing up a car computer, but have since come up with new needs/wants, so this setup is up for sale.

The computer itself includes the following:

Biostar M7NCG400 Micro ATX Motherboard
http://www.newegg.com/product/product.asp?...N82E16813138234

Athenatech A100SC.200 Black and Silver Micro ATX Case
http://www.newegg.com/product/product.asp?...N82E16811190003

Thermaltake A1492 60mm Ball Cooling Fan/Heatsink - Retail
http://www.newegg.com/Product/Product.asp?...N82E16835106041

AMD Mobile Athlon XP-M 2200+ (35W) Barton 266MHz FSB Socket A Processor
http://www.newegg.com/Product/Product.asp?...N82E16819103440

Rosewill 512MB 184-Pin DDR SDRAM DDR 400 (PC 3200)
http://www.newegg.com/Product/Product.asp?...N82E16820223009

Western Digital Caviar SE WD2500JB 250GB 7200 RPM IDE Ultra ATA100 Hard Drive (Bought retail, not from NewEgg, this is to show you what it is)
http://www.newegg.com/Product/Product.asp?...N82E16822144309

Had a new unused black CD-R/W on hand and it is installed as well.

System is built and tested, but does not include and operating system. I had WinXP Professional installed but due to licensing will need to remove it. You will need to provide one.

Lilliput 7" VGA Screen
http://www.mp3car.com/store/product_info.p...b1e6b7e45f5e430

Touchscreen on this does not work and has been removed. You can order a new one for $50 from http://digitalww.com/7TSLilli.htm. I will include the touch panel with this, if you are good at fixing traces you may get it to work. I got it to work a few times, but it is flakey.

I want $450 plus shipping for this. If you would like the GPS to go with it, $60 more and it is yours.

Pictures available upon request, all items have links so you can see them there. If you would like the radio surround that has a monitor bezel molded into it I will throw that in as well. It does require some minor work though (sanding and repainting).

Please NO O/T posts...

 

What are the dimensions on that case? I am trying to run the case behind the dash when I do mine, will it fit?

 

The case will definately not fit behind the dash. It is more of a trunk thing.

FYI: I will not seperate any of these items at this time. If I don't sell it within four days I may start parting out.

 

Computer has been sold locally. The screen and bezel if up for sale, $175 shipped.

 

I could have swore you had this screen..
http://www.mp3car.com/store/product_info.p...b1e6b7e45f5e430

if I'm right, I may be interested.
What happened to the dash piece you were molding around it? I remember it looking really nice..

 

Actually that is the screen I have, I looked at the thumbnail and it was late... lol

I have the dash piece it just needs to be sanded down around the buttons (they were sticking) and repainted.

 

Soo $175 but then we have to buy the $50 screen and reassemble it? What needs to be done to make it work? I'm a lil confused.
Will you include your molded dash piece?

 

Yes, the molded dash piece will be included as well. It will work as is, just the touchscreen won't work. All you would need to do is buy the touch panel, plug the ribbon cable into the circuit board, close up the bezel and it's good to go.

Edit: Changing the price on this to $150 shipped to US address.

 

The touchscreen is still up for sale guys. I will be listing it on mp3car.com if it doesn't sell here.

 

I will contact you tomorrow evening regarding payment details. mineeee smile.gif