t4turbotiburon

Hey guys havent been around latly to much with school and what not but I took the tib out of storage for winter and within a week of it coming out the starter went bad and im just tired of working on it and need to have somthing that gets better than 20mpg so the tib is going to be it. Im parting out all performance parts I have, That means EVERYTHING PERFORMANCE.
make sure to figure for shipping on larger items. Email me at skatecycle@peoplepc.com for anyone intersted. If paying via paypal add 2% for fees.

Engine (wisco pistons, I beam rods, ported and polished head, EX. cam gear, balaced everything, bored 20 over) 750$ plus shipping I will drop off at local shipping depot. Engine has less thank 5k on it and was boosted to 20psi. built for much more somewhere around 450-500hp or 30psi.

Clutch setup This is an awsome setup I did a conversion from pull style to a push style this is everything you will need including clutch good for 500 ft lbs 4 puck sprung hub. 500$

Intercool pipes 3" aluminum tig welded with couplers and T bolt clamps 150$

Intercooler 12x24x3" spearco core bar and plate with 3" inlets 200$

Aeromotive fuel pump 700hp with stainless feed lines and aeromotive FPR 300$

fuel injectors one 36lb set and one 42lb set 100$ set

Big brake kit, Coustom kit with 4 piston RX7 calipers (aluminum caliper not cast steel) Wilwood rotors with less than 1k on kit 11.75" dia (must use at min 16" rim some will not fit) coustom rotor hats and everything needed for encapsulated rotor setup 500$

Coustom turbo manifold wraped with heat wrap full stainless tig welded. External wastegate. 300$

Hks 50mm wastegate for manifold 300$

Tial blow off valve 75$

3" full ex. turbo back with removable v band clamps sectional 150$ will require a downpipe to be made unless using my manifold and turbo.

Holset Hy 35 turbo good condition with very little shaft play and wastegate welded shut will do 500hp on a gas engine. 200$

Megasquirt v3 ecu 200$

Greddy emanage ultimate paid 600 will let go for 300$ and main harness included

Greddy e-01 boost controler and gauge monitor 200$ comes with 3 bar map sensor and all other needed hardware.

Autometer boost gauge 20$

Autometer Pyrometer needs probe 50$

auto gauge 8k tach 75$

I am not intersted in any trades for anything as I am getting out of the performance end of things. That pretty much covers it as things get sold and as I think of some more I will post or delet them. I will provide pictures to anyone intersted. Thanks for looking and hope somone can use this stuff.

'treezy

pictures of the big brake kit, installed? are you talking front only, or all 4?

pictures of the injectors?

pictures of the manifold?

yea.. basically pictures of everything? (because sooner or later someone will ask).

what do you mean "very little shaft play" ..that's scary.

Alex01tib

Do you have the Oil Return line? It wasnt listed but i know you had the car running so you must have had a return line.

if so can i get a pic and price?

tibbytib

possibly interested in the Blowoff Valve pending pics.

1997tibby

yo where are u located? i'm willing to pick up the motor if your not on the other side of the USA! i'll call dibs on the motor pending location

Zippy1

Yeah, dude where abouts are ya? I might be interested in the engine and the clutch and likely the BBK. Let us know where you are..

tanc

DIBS on both sets of injectors.

Can you tell me who makes them, how many km's on them, have they been flow tested, and in what condition they are in. thanks

zoned019

Pretty sure he's in ohio guys, or somewhere around there.

Isn't this the same guy who ripped a bunch of people off because his car got stolen or something?

yamaha

He is located in Missouri. Just a FYI.

RedShark_TiBuRoN

What part of missouri? I can drive up there to get that BBK off your hands, it'll only take me 2-3 hours if you're in the Kansas City Area. Let me know if this is for all 4.