For Sale Sell all your stuff here or use the Classifieds Section!

Accent 1.6 turbo kit + extras

Thread Tools
 
Old Aug 2, 2011 | 01:09 AM
  #1  
EclipseMTL's Avatar
Thread Starter
Senior Member
 
Joined: May 2009
Posts: 264
Likes: 0
From: Omaha, Nebraska
Vehicle: 02 Accent GL, 86 BMW 325es
Default Accent 1.6 turbo kit + extras

The time has come for the Accent to be the daily driver, and it needs to be reliable. I have taken the turbo off it, and am trying to recoup some of the money and time I have put into it. Everything is OBO, so please don't be afraid to shoot an offer!



The turbo manifold is for the 1.6 alpha DOHC Accent. Its a 14b TD05H turbo with very minimal shaft play. I had a little flange added onto the compressor housing to aid in running intercooler lines. The manifold will need a new gasket, but will bolt right on using the stock mount. It comes with a feed line, but may need to be replaced as it is kinked thanks to my great packing skills. Its an external wastegate manifold that's mounted on the middle of the manifold. The wastegate is an older Turbonetics Deltagate Mark 2.





















It also comes with a eBay special Blow off valve and a few silicone couplers, t bolt clamps and a few short pieces of piping.









Will also come with this fan, it works, but cover is loose.





SOLD



Also have this 2.5 bar map sensor for the Accent, plug and play. SOLD







I have these purple injectors, I never could figure out what size they are, even after searching all of the numbers on it.



20$ shipped for these.











I also have my AEM eugo wideband gauge. I have all the harnesses needed with the 02 sensor. I'm not 100% sure where the manual for the gauge is, I know I have it, just gotta look around some more.



I'm asking 90$ + shipping for the gauge.















I also have bigger injectors I got from turbosocks that were never installed. I was going to run a return line and never did get around to it. These are 40 lb/hr injectors.



150$ for the set.









SOLD









Then I have a 1.6 fuel rail that is tapped and ready to be made into a return style. It also comes with a good length of hose to be ran back to the fuel tank, and a hose to be used with the FPR. SOLD











I also have a few misc LC items that I'll let go for cheap.



LC eyelids that can be resprayed to match your car. 10$ shipped.





LC reverse glow overlays. I don't have the instructions for these, but you wire them up to parking lights. I bet theres instructions out there for these with other cars. SOLD.







Uninstalled ichiban ebrake handle. 15$ shipped.







I also have three gauges and 3 gauge pillar for sale.



30$ each, oil pressure and temperature are electric and do the opening ceremony, boost is mechanical. Electrical gauges will come with senders.



Gauge pillar 10$ + shipping

















Reply
Old Aug 2, 2011 | 02:53 AM
  #2  
wheel_of_steel's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 3,837
Likes: 0
From: Floating around the AUDM
Vehicle: X3 Sprint, S-Coupe Turbo
Default

what model of FIC is it man?
Reply
Old Aug 2, 2011 | 06:28 AM
  #3  
JonGTR's Avatar
Moderator
 
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Default

3 of the pics show #30-1910.





Man, I need it, but no cash right now.
Reply
Old Aug 2, 2011 | 12:03 PM
  #4  
EclipseMTL's Avatar
Thread Starter
Senior Member
 
Joined: May 2009
Posts: 264
Likes: 0
From: Omaha, Nebraska
Vehicle: 02 Accent GL, 86 BMW 325es
Default

Heres a picture to better show what model it is. But as Jon said, 30-1910
Reply
Old Aug 3, 2011 | 12:08 AM
  #5  
wheel_of_steel's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 3,837
Likes: 0
From: Floating around the AUDM
Vehicle: X3 Sprint, S-Coupe Turbo
Default

beg your pardon. cheers for clearing that up



i'm going to place dibs on the FIC. eclipseMTL, you've got a PM with my address for teh postzorz.
Reply
Old Aug 6, 2011 | 04:48 PM
  #6  
jcturbeau's Avatar
Senior Member
 
Joined: Oct 2010
Posts: 108
Likes: 0
From: ha.org
Vehicle: x3
Default

if there is a line for the FIC, i'd like to stand in it, too. good luck to the original bidder though.
Reply
Old Aug 6, 2011 | 04:52 PM
  #7  
EclipseMTL's Avatar
Thread Starter
Senior Member
 
Joined: May 2009
Posts: 264
Likes: 0
From: Omaha, Nebraska
Vehicle: 02 Accent GL, 86 BMW 325es
Default

It is sold already to wheels of steel, I'm sorry jc
Reply
Old Aug 6, 2011 | 06:36 PM
  #8  
jcturbeau's Avatar
Senior Member
 
Joined: Oct 2010
Posts: 108
Likes: 0
From: ha.org
Vehicle: x3
Default

no prob, them's the breaks when it comes to good equipment and prices. thx and good luck w/ rest of the sale.
Reply
Old Aug 9, 2011 | 06:02 AM
  #9  
jcturbeau's Avatar
Senior Member
 
Joined: Oct 2010
Posts: 108
Likes: 0
From: ha.org
Vehicle: x3
Default

those injectors look like 2003 stock/stage 0 or 2004 stock/stage 1injectors for an SRT4 or PT Cruiser turbo (based on the part number). i think they're rated at 44-49# but at a higher fuel rail pressure, around 59psi i believe.
Reply
Old Aug 9, 2011 | 03:23 PM
  #10  
turbosocks's Avatar
Super Moderator
 
Joined: Mar 2006
Posts: 1,304
Likes: 0
From: ABQ, NM
Vehicle: 2001 hyundai tiburon
Default

definately NOT srt-4 injectors, nor do they even have the same body as the stage 0 or 1 injectors.. they are 40lb injectors @ 43psi.
Reply



All times are GMT -6. The time now is 02:39 AM.