One more thing you have an aftermarket bumper or do you have a lip??

 

not sure. make an offer + shipping for the setup.

and its just a lip.

 

alrighty. so i pulled some stuff off the car today.


both o2 sensors and sunroof weatherstripping are sold.


have an alternator, stock exhaust manifold and the ecu laying around.

 

Bump!

Motor will be pulled tomorrow. will part out mostly everything under the hood.

All interior is still complete exect ecu and a part of the driver side door panel.



Like brand new tail lights, headlights/corners are in good shape, just need a cleaning.

 

A recommendation: pull out the . . .

shifter including the base
shifter boot
shifter surround
shifter cables
shifter cable firewall grommet/bracket
driver's side engine mount
clutch master cylinder
clutch pedal
clutch hydraulic lines
brake pedal with bushings

and maybe if the transmission deal falls through:
transmission with slave cylinder
clutch
flywheel
flywheel mounting bolts

And offer it for $500 as a manual transmission conversion kit

 

anyone have a pic of everything i need to take off persay the 5spd swap?

also, wondering what the going rate for a non-captive swap is? and what is all required.


hubs/calipers/rotors?

 

I have a request. How much for the washer jets in the hood and I need an a/c line. The line is the one that has the low side pressure fitting port and it goes from the a/c compressor to the expansion valve block. My line is leaking at the valve core. Put a new valve core in it and is still leaking out that port. The zip is 03857

 

I really really need the hubs and spindles. I'd actually buy the whole a arms if you'll pull em. I can pay right away for this stuff. I just have super bad hubs, and I've pulled the spindles too many times to count so my seals are trashed. I could use an axle as well, I think its the drivers side.

I need the dome light console too.

My zip code is 92336 and my phone number is 909 770 2915 if you wanna let me know about this stuff. Thanks!

Chris

 

pm sent spool.

and black tibs, ill give you a call tomorrow to figure out exactly what you need.

 

spoolshad. i sent u a pm trying to clarify what line is it.

called blacktibs.



me and a buddy also removed everything from the manual trans swap.


Clutch and brake pedal.
Shifter w/ cables base and surround.
Clutch master cylinder with all hydraulic cables
and drive side engine mount.


all you need is a mans tran and flywheel. unless you wanna buy my whole swap.

ill start the combo at 500$ obo.


or 200$ shipped obo for the whole manual trans swap parts