97 Green Tib Part Out
04-10-2006, 08:26 AM
#22
Senior Member
Thread Starter
Join Date: May 2006
Posts: 1,494
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998/Hyundai/Tiburon FX
Bump again. Come on, I have SO much stuff here, and it will all go to waste if nobody wants it.
Remember that the engine and transmission are still in working order (except there is no timing belt on the engine and I took off the power pulleys and intake manifold (
Still have the stock pulleys though).
I have 2 intake manifolds and a stock throttle body.
If you need anything at all, please let me know. smile.gif
Remember that the engine and transmission are still in working order (except there is no timing belt on the engine and I took off the power pulleys and intake manifold (
Still have the stock pulleys though).
I have 2 intake manifolds and a stock throttle body.
If you need anything at all, please let me know. smile.gif
04-10-2006, 08:29 AM
#23
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
I'm waiting to see if we can get the wife's car running before I order anything really.
I could use the gauge cluster COMPLETE, the shifter surround if it's a manual, the UNDER dash part for the drivers side.
...
There's more, I'll work up a list. OH! You know the Oh Shit handles? I need the bolt cover for the passenger ones.
The drivers side door panel, the center portion that's all curvy you know? If there are no cracks. I need some of the dash switches too, but I'm not sure which.
I could use the gauge cluster COMPLETE, the shifter surround if it's a manual, the UNDER dash part for the drivers side.
...
There's more, I'll work up a list. OH! You know the Oh Shit handles? I need the bolt cover for the passenger ones.
The drivers side door panel, the center portion that's all curvy you know? If there are no cracks. I need some of the dash switches too, but I'm not sure which.
04-12-2006, 06:47 PM
#25
Senior Member
Join Date: Sep 2004
Location: Pottstown, PA
Posts: 682
Likes: 0
Received 0 Likes
on
0 Posts
Dude you bumped this like a million times. Why arent you responding now. Im interested in something and as long as its not damaged will buy it from you. Whered you go?
04-12-2006, 08:57 PM
#26
Senior Member
Thread Starter
Join Date: May 2006
Posts: 1,494
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998/Hyundai/Tiburon FX
Crap my bad. Are you in dire need of the pump, because I have school and work all weekend and don't get home until after the shipping store closes. I could probably get to the shipping store tommorrow after school if I rush though. Ummm, I would say about 40 bucks + shipping. Please let me know. Thanks.
Redz, I don't think I have the oh shit handle cover because I sold the headliner and sun visors and threw that in, sorry. I also sold the temp/gas gauges from the cluster so I wouldn't think you'd want that either.
As far as I know there are no cracks in the curvey piece of the drivers side interior panel.
The under dash piece has a few holes in it from when I had the ricer underglow lol. But they are all the way at the bottom and barely noticable.
I should have you covered on the switches and knobs, let me know what you need.
PM me with further details guys.
Sorry for the delay, but I kind of forgot about the thread due to all of the PM's and all of the work I am doing to the new tib.
Paypal addy is tdonnell@dtcc.edu
If you are kind I would appreciate adding 3% for those damn paypal fees, but it is not a necessity.
Thanks for the interest everyone, feel free to continue requesting parts, I will start checking this daily - should have been already but.. (probably more than once a day). cool.gif
Redz, I don't think I have the oh shit handle cover because I sold the headliner and sun visors and threw that in, sorry. I also sold the temp/gas gauges from the cluster so I wouldn't think you'd want that either.
As far as I know there are no cracks in the curvey piece of the drivers side interior panel.
The under dash piece has a few holes in it from when I had the ricer underglow lol. But they are all the way at the bottom and barely noticable.
I should have you covered on the switches and knobs, let me know what you need.
PM me with further details guys.
Sorry for the delay, but I kind of forgot about the thread due to all of the PM's and all of the work I am doing to the new tib.
Paypal addy is tdonnell@dtcc.edu
If you are kind I would appreciate adding 3% for those damn paypal fees, but it is not a necessity.
Thanks for the interest everyone, feel free to continue requesting parts, I will start checking this daily - should have been already but.. (probably more than once a day). cool.gif
04-18-2006, 12:31 PM
#29
Senior Member
Thread Starter
Join Date: May 2006
Posts: 1,494
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998/Hyundai/Tiburon FX
Well, it is pretty deeply scratched into the clear coat, and the bottom is folded in a bit about 1 inch for half the length of the door, so I don't think you would want it unless yours doesn't function at all. But still let me know, thanks.
BTW, there are still a good deal of parts here. smile.gif
BTW, there are still a good deal of parts here. smile.gif
