labmixz

Location: Sarasota, FL

2003 BetaII (4cyl) Tiburon
45,000 miles Total (12,000 on Engine Build)

The Good:
Turbo-Ready, built engine...
Tapped Oil Pan
Modified Fuel Rail w/600cc Injectors
3" Turbo Single Outlet Exhaust
ECU Wires longer for easy access through glove box, easy for wiring a stand-alone or anything with the ECU.
APEXi S-AFC still wired in the car.
B&M Short Throw Shifter
TEIN S-Tech Springs
Tiburon GT Struts
SPEC Stage3 Clutch
SPEC Lightweight Flywheel
NGK 7series Spark Plugs
NGK Spark Plug Wires
Enkei RS-7 Wheels w/New Rubber on Front
Cross-drilled / Slotted Rotors
gReddy Front Strut Bar
ARK Rear Strut Bar
Filled Urethane Motor Mounts
Tiburon GT Leather Seats
600whp Capable Intercooler
2005 Bumper
AC is cold as heck
Car has never been in an accident, one single owner (me), completely paid off.

Engine Build:
Pauter Titanium Connecting Rods
Wesico Forged Pistons (9:1 Compression)
Block Over-bored .5mm
Knife-Edged, Polished, & Balanced Crankshaft

The Bad:
It does not run, it needs some stock parts to run. Here's what it needs to run:
Stock Header
Stock Fuel Rail
Stock Oil Pan

Body has one very small dent on the driver door, one small paint chip (cheap Hyundai paint) on the passenger fender, paint crack on passenger rear bumper (cheap Hyundai paint again).

Price: $4,000

I recently just took off all my turbo parts, then realized when I moved I left most of my old stock parts in the shed at my old house, which of course got thrown out by the new tenants... soo... simple fact is, I'm too busy to deal with the car, I don't have time to buy the parts to get it running as stock nor do I have time to work on the car and it sitting in my drive way is just a waste. The car was running and boosting 16psi before I sold my turbo parts, I sold my turbo parts because I'm moving to a different car.

I'm not looking to part it out anymore than I already have simple because I don't have time to take off more stuff.

tib _500

any pictures of under the hood currently to give us a visual of whats missing? also is the oil pan missing or just taped for the turbo?

labmixz

<div class='quotetop'>QUOTE (tib_500 @ Sep 9 2009, 07:30 PM) <{POST_SNAPBACK}></div><div class='quotemain'>any pictures of under the hood currently to give us a visual of whats missing? also is the oil pan missing or just taped for the turbo?</div>

tapped for the turbo, whats missing under the hood is the stock header... the aftermarket fuel rail / injectors are still on the car, I have the stock injectors / fuel pump (right now the walbro is on it) that come with the car...

So you would need the parts I said in the first post, stock fuel rail, stock header, and the stock oil pan or you could plug the oil pan...

If you are interested let me know I'll go take a picture tomorrow when it's light out.

i8acobra

What would be needed to put the turbo back on, beside the manifold and turbo?

Bullfrog

locked.gif

Failure to follow http://www.rdtiburon.com/index.php?showtopic=32477

Please contact an ADMIN when you have taken the appropriate pictures.

majik

Your title says, "Built Engine++" yet it's not even in running condition, requiring stock parts to complete the engine. I would say it's more than questionable, and no pictures are provided of the engine in it's current condition.

I don't know how old the pictures are, since the car isn't running right now. Please get some decent pictures, and some proof (coke can? post it note with forum name?) the vehicle is yours.